DAIKIN IM 1366 Remote Integrated Thermostat Instruction Manual
Mounting Considerations
Overview
Mounting considerations:
The remote integrated thermostat is used in conjunction with
MicroTech 4 Lite equipped units. The thermostat has a digital
display for Temperature, Occupancy, Fan Speed, System
Mode, Alarm, Setpoint and Status indication. Controls include
eight buttons for Setpoint, System Mode, Fan Speed, On/Off,
Override Reset, and Programming. (Figure 1).
• The device is suitable for semi-flush mounting with a
recessed conduit box.
• The unit should not be mounted in recesses, shelving,
behind curtains or doors or above or near direct heat
sources.
• Avoid direct sun and draught.
Figure 1: Thermostat Buttons
• The conduit must be sealed on the device side, as
currents of air in the conduit can affect the sensor reading.
• Local installation regulations must be observed.
Use a flathead screwdriver to gently pry the front covering to
access the terminals shown in Figure 2.
Figure 2: Thermostat Installation
Table 1: Thermostat Buttons
Number
Name
Function
1
2
ON/OFF
Presence
Power on or power off
Enter or exit a programmed
presence mode.
3
Program
Time Scheduler. Pressing this
button adjusts date/time setting,
while holding it allows schedule
programming.
4
Minus
Setpoint adjustment. Each
operation of the Minus (-) button
reduces the setpoint by 0.1
°C/0.5 °F or 0.5 °C/1.0 °F which
is defined in controller's setting.
5
Plus
Setpoint adjustment, each
operation of the Plus (+) button
increases the set point by 0.1
°C/0.5 °F or 0.5 °C/1.0 °F which
is defined in controller’s setting.
Maintenance
6
7
OK
Confirms date/time and scheduler
Wipe the display as needed with a damp water only cotton
cloth. Do not use any type of cleaner as it may damage the
buttons or scratch the display. Do not paint.
settings.
Fan
Fan speed adjustment. The fan
speed is set up in grades by
the controller. By pressing the
Fan button, the grades can be
selected clockwise in a cyclical
way. The current grade selected
manually is indicated by the
highlighted bar on the display.
8
Mode
Energy mode selection. The 3
energy modes are Auto, Comfort
and Economy. By pressing the
Mode button, the user can switch
HMI-SG between the 3 modes in
a cyclical way. The current mode
manually selected is indicated by
relevant symbol on the display.
IM 1366
2
| General | Details |
|---|---|
| Name | DAIKIN IM 1366 Remote Integrated Thermostat Instruction Manual |
| Make | Daikin |
| Language | English |
| Filetype | PDF (Download) |
| File size | 0.28 MB |
(1 votes, average: 5.00 out of 5)
Loading...
DAIKIN One Lite Smart Thermostat User Guide
Daikin One Lite Smart Thermostat Instruction Manual
DAIKIN DTST-ONE-ADA-A One Touch Smart Thermostat Installation Guide
DAIKIN IM 1368 Vertical Stack WSHP Thermostat Instruction Manual
DAIKIN TRC-11 One Lite Connected Thermostat Instruction Manual
DAIKIN ONE Smart Thermostat Instructions
DAIKIN DKN509 Wireless Communicating Thermostat Instruction Manual
DAIKIN SQNSQ22 One Touch Smart Thermostat User Manual
EMSQ22 Daikin ONE Lite Smart Thermostat User Manual
DAIKIN S21 One Lite Smart Thermostat User Guide
Honeywell RLV3100 Digital Thermostat Installation Guide
Honeywell Home N100 Series Non Programmable Thermostat User Guide
OJ ELECTRONICS MWD5-1999-UAC3 Voice Control Wi-Fi Thermostat Instructions
AJAX108846 White Smart Wifi Thermostat Instruction Manual
Danfoss GreenCon RC-T2/T4 Room Thermostat Installation Guide
Fantini Cosmi CH180-230V Touch Screen Programmable Thermostat Instructions
sygonix 2735095 Wireless Heating Thermostat Instruction Manual
EPH CONTROLS RFRB RF Room Thermostat Instruction Manual
TRANE XR102 Non-Programmable Thermostat User Guide
Provirtec TH-01 Smart Thermostat User Manual