Braeburn 8205-100-02 Universal Smart Wi-Fi Thermostat Instruction Manual
2
Connect Your Wires
Connect your wires as required for your system type.
Refer to Section 3 - Wiring, on pages 4-5 for
more information.
C
24VAC Power Terminal (C)
3
Provide Power to Thermostat
• Battery Power - Insert the 2 supplied “AA” type alkaline
batteries into the battery compartment located in the rear
housing of the thermostat. Make sure to position the
Positive (+) and Negative (-) sides of the batteries correctly
with the +/- symbols in the battery compartment.
• Optional 24 Volt AC power - Connect the common side
of the transformer to the C terminal on the thermostat
sub-base. In dual transformer installations, the transformer
common must come from the cooling transformer.
NOTE: 24 Volt AC power may be required to operate on
heat pumps, cool only systems or heat only systems.
Batteries Installed as Shown
4
Attach Thermostat to Sub-Base
Once you complete the wiring in Section 3, attach
thermostat to sub-base and then configure the
Installer Settings in Section 6.
1) Line up the thermostat body with the sub-base.
2) Carefully push the thermostat body against the
sub-base until it snaps in place.
NOTE: This thermostat ships configured as a
1 Heat / 1 Cool conventional (CONV 11) thermostat.
You must configure the thermostat for other system
types using the Installer Settings menu. See section 6.
3
Installer Manual
| General | Details |
|---|---|
| Name | Braeburn 8205-100-02 Universal Smart Wi-Fi Thermostat Instruction Manual |
| Make | Braeburn |
| Language | English |
| Filetype | PDF (Download) |
| File size | 0.32 MB |

Braeburn Programmable Touchscreen Thermostat User Manual

Braeburn TH-BR22 Programmable Thermostat Instructions

Braeburn 8205 Universal Smart Wi-Fi Thermostat User Guide

Braeburn 2030 Economy Model Thermostat User Manual

Braeburn 2030 Programmable Thermostat Instruction Manual





























