Home > WHITE RODGERS > White Rodgers 1E65-144 Non Programmable Electronic Digital Thermostat Instruction Manual
White Rodgers 1E65-144 Non Programmable Electronic Digital Thermostat Instruction Manual
1E65-144
Non-programmable Electronic Digital Thermostat
For Line Voltage Applications
INSTALLATION AND OPERATION INSTRUCTIONS
Operator: Save these instructions for future use!
DESCRIPTION
The 1E65-144 thermostat has been designed to control electric heating
systems such as baseboard heaters, radiant floors, radiant ceilings
and convectors.
Temperature
Adjustment
Buttons
The adapter plate is used to offset the thermostat when an obstruction
prevents the thermostat from being mounted directly to the junction
box.
Temperature
Display
Light
Button
The thermostat cannot be used with the following:
-
-
-
-
a resistive load under 2 A
a resistive load over 16.7 A
systems driven by a contactor or a relay (inductive load)
central heating systems
System
Switch
Parts Supplied:
One (1) thermostat
Available Accessories:
F61-2642 Adapter Plate
Two (2) 6-32 pan head screws
SPECIFICATIONS
Supply:
120/240 VAC, 50/60 Hz
Setpoint range:
Display range:
Display resolution: 0.1°C (1°F)
7°C to 32°C (45°F to 90°F)
0°C to 37°C (32°F to 99°F)
Minimum load: 2 A (resistive only)
500 W @ 240 VAC
250 W @ 120 VAC
Maximum load: 16.7 A (resistive only)
4000 W @ 240 VAC
Shipping:
Approval:
–20°C to 50°C (-4°F to 120°F)
2000 W @ 120 VAC
PRECAUTIONS
WARNING
!
* Failure to read and follow all instructions carefully before
installingoroperatingthiscontrolcouldcausepersonalinjury
and/or property damage.
* Topreventelectricalshock,personalinjury,and/orequipment
damage, disconnect electric power to system at main fuse or
circuit breaker box prior to installation or service.
* All wiring must conform to local and national electrical
codes and ordinances.
INSTALLATION
Installation should be done by a qualified heating and air conditioning
contractor or licensed electrician.
Optional: Use the adapter plate accessory if you need to offset the
mounting holes on the junction box. Align and affix the wall plate to
the electrical junction box using two 6-32 flat head screws included
with the plate.
Loosen the screw holding the thermostat cover to the base, open cover
on hinge and remove the cover.
Screw
White-Rodgers is a division
of Emerson Electric Co.
PART NO. 37-6862D
Replaces 37-6862C
0839
| General | Details |
|---|---|
| Name | White Rodgers 1E65-144 Non Programmable Electronic Digital Thermostat Instruction Manual |
| Make | WHITE RODGERS |
| Language | English |
| Filetype | PDF (Download) |
| File size | 1.04 MB |

White-Rodgers 1F97-1277 Big Blue Single Stage Thermostat User Manual

White-Rodgers 1F56N-444 Thermostat User Manual

White-Rodgers 1F83-277 Heating & Air Conditioning Auto Changeover Heat Pump Thermostat User Manual

White-Rodgers 1E78 Non Programmable Heat Only Thermostat User Manual

White-Rodgers M30 Thermostat Instruction Manual

WHITE-RODGERS 1F51N-619 Low Voltage Evaporative Cooler Thermostat Instruction Manual

White Rodgers 1F78-151 Non Programmable Thermostat Instructions

WHITE RODGERS 1F80-51 Programmable Electronic Digital Thermostat Instruction Manual

WHITE-RODGERS 1F86-0471 Blue Single 1 1 Stage Thermostat Instruction Manual

WHITE-RODGERS 1F90-71 5-Day 2-Day Electronic Digital Thermostat Instruction Manual

















