Home > StelPro > stelpro STZB402+ ELECTRONIC THERMOSTAT FOR THE SMART HOME User Guide

stelpro STZB402+ ELECTRONIC THERMOSTAT FOR THE SMART HOME User Guide

Ambient temperature  
The temperature is displayed either in °C with a 0.5 °C resolution or in °F with a 1 °F resolution.  
The screen will display LO if the temperature drops below 0 °C (32 °F) and will display HI if the  
temperature rises above 50 °C (122 °F).  
Temperature setpoints  
The setpoint may be edited by the user using the UP and DOWN buttons located on the thermostat.  
The setpoint may also be modified through the ZigBee network.  
The minimum setpoint is 5 °C (41 °F) and the maximum setpoint is 30 °C (86 °F).  
NOTE: if the setpoint is set at 7 °C (45 °F) or below, the frost warning icon  
warn the user that water pipes might be subject to freezing.  
will be displayed to  
Heating power indicator  
Whenever the thermostat is actively heating the room, the heating status graph will display the  
heating percentage.  
No bar: 0%  
1 bar: 1-25%  
2 bars: 26-50%  
3 bars: 51-75%  
4 bars: 76-100%  
Thermostat mode  
The thermostat has three modes: Comfort, Eco and Off. The first two modes have their own  
preestablished setpoint. Comfort: 21 °C (70 °F), Eco (  
The user may change the setpoint to any value in the range described in the setpoint section.  
When the Eco mode is active, the Eco icon ( ) is displayed on the LCD. When the Off mode  
): 17 °C (63 °F).  
is active, the frost warning icon is displayed on the LCD and the setpoint is replaced by ( -- ).  
The thermostat mode may be changed locally on the thermostat by pressing the UP and DOWN  
buttons simultaneously for less than 3 seconds while on the main screen. The Eco setpoint is local  
to the thermostat and cannot be edited through the ZigBee network.  
If a setpoint change is sent through the ZigBee network, the thermostat mode will automatically  
switch to Comfort mode.  
8
042D07_INSSTZB402+0622  
GeneralDetails
Namestelpro STZB402+ ELECTRONIC THERMOSTAT FOR THE SMART HOME User Guide
MakeStelPro
LanguageEnglish
FiletypePDF (Download)
File size0.39 MB
Download PDF
1 Star2 Stars3 Stars4 Stars5 Stars (1 votes, average: 5.00 out of 5)
Loading...
STELPRO STF362NP Floor Heating Thermostat Owner’s Manual
STELPRO STF362NP Floor Heating Thermostat Owner’s Manual
STELPRO ST302P Programmable Electronic Thermostat Owner’s Manual
STELPRO ST302P Programmable Electronic Thermostat Owner’s Manual
STELPRO SAT402ZB Smart Thermostat User Guide
STELPRO SAT402ZB Smart Thermostat User Guide
STELPRO ST252NPFF Non-Programmable Electronic Thermostat Owner’s Manual
STELPRO ST252NPFF Non-Programmable Electronic Thermostat Owner’s Manual
STELPRO ST402PFF Programmable Electronic Thermostat Owner’s Manual
STELPRO ST402PFF Programmable Electronic Thermostat Owner’s Manual
STELPRO ASMC402 Maestro Zigbee Smart Programmable Thermostat User Guide
STELPRO ASMC402 Maestro Zigbee Smart Programmable Thermostat User Guide
STELPRO SIBTE12C Electronic Thermostat Owner’s Manual
STELPRO SIBTE12C Electronic Thermostat Owner’s Manual
STELPRO STZW402+ Electronic Thermostat for The Smart Home Owner’s Manual
STELPRO STZW402+ Electronic Thermostat for The Smart Home Owner’s Manual
STELPRO SIBTE13F Electronic Thermostat User Guide
STELPRO SIBTE13F Electronic Thermostat User Guide
STELPRO STCP MULTIPLE PROGRAMMING ELECTRONIC THERMOSTAT User Guide
STELPRO STCP MULTIPLE PROGRAMMING ELECTRONIC THERMOSTAT User Guide

stelpro STZB402+ ELECTRONIC THERMOSTAT FOR THE SMART HOME User Guide