STELPRO STCP MULTIPLE PROGRAMMING ELECTRONIC THERMOSTAT User Guide
for the first time instead, the backlight will be activated. To
quickly scroll through the set point values, press and hold down
the button. From
mode, the set points can range between 3
and 35°C and can only be adjusted by increments of 1°C (from
37 to 95°F; by increments of 1°F from the Fahrenheit mode).
From
mode, the set points can range between 3 and 28°C
(from 37 to 82°F). The thermostat will turn off if the set point is
lowered below 3°C (37°F), and the set point value displayed
will be --. The standard factory set point adjustment is 21°C
(
mode). From this mode, the screen displays the
/
mode temperature, the
the day of the week.
/
mode set point, the hour and
This mode is initially activated when the power is turned on for
the first time. You must adjust the hour (as described in the
section “Adjustment of the hour and the day of the week”)
before switching to other modes by pressing down the Mode
or Pre Prog button.
Automatic Mode (Auto)
To switch from the Manual mode to the Automatic mode, and
conversely, press down the Mode button. The Man or Auto icon
is displayed at the bottom of the screen as applicable.
From the Automatic mode, the thermostat adjusts the set points
according to the programmed periods. If no data is entered,
the thermostat acts as in Manual mode and the standard
factory set point adjustment is 21°C (
mode). It is always
possible to manually adjust the set point using the + or - button.
The selected set point will be effective until one period is
programmed, which represents an hour and a day of the week.
Note that, if the set point is lowered to off (--), the programming
will not be effective. It is possible to program 4 periods a day,
meaning that the set point can change automatically up to 4
times a day. The period order is not important.
From this mode, the screen displays the temperature, the set
point, the hour, the day of the week and the current programmed
period number (1 to 4; as applicable).
10
INSSTCP5MA0622
| General | Details |
|---|---|
| Name | STELPRO STCP MULTIPLE PROGRAMMING ELECTRONIC THERMOSTAT User Guide |
| Make | StelPro |
| Language | English |
| Filetype | PDF (Download) |
| File size | 0.45 MB |
(1 votes, average: 5.00 out of 5)
Loading...
STELPRO STF362NP Floor Heating Thermostat Owner’s Manual
STELPRO ST302P Programmable Electronic Thermostat Owner’s Manual
STELPRO SAT402ZB Smart Thermostat User Guide
STELPRO ST252NPFF Non-Programmable Electronic Thermostat Owner’s Manual
STELPRO ST402PFF Programmable Electronic Thermostat Owner’s Manual
STELPRO ASMC402 Maestro Zigbee Smart Programmable Thermostat User Guide
STELPRO SIBTE12C Electronic Thermostat Owner’s Manual
STELPRO STZW402+ Electronic Thermostat for The Smart Home Owner’s Manual
STELPRO SIBTE13F Electronic Thermostat User Guide
STELPRO STCP Floor Heating Thermostat Multiple Programming User Guide
GENERAL LIFE SOLARA 330S RF Digital Room Thermostat User Manual
Danfoss DEVIreg 530 Electronic Thermostat Installation Guide
KETOTEK KTF0163 Series Smart Thermostat Instruction Manual
ARISTON 3319126 CUBE S NET Wi-Fi Thermostat User Manual
Warmup 3iE Energy Monitoring Thermostat Instruction Manual
STELPRO ST252NPFF Non-Programmable Electronic Thermostat for Fan Heaters Owner’s Manual
EMSQ22 Daikin ONE Lite Smart Thermostat User Manual
ADVENT AIR ACTH12 Digital LCD Thermostat Instruction Manual
Uponor T-247 BUS Smatrix Base Thermostat Installation Guide
Honeywell VisionPRO Series 7 Day Programmable Thermostat User Guide