Home > PNI > PNi CT36PRO Smart Thermostat Instruction Manual

PNi CT36PRO Smart Thermostat Instruction Manual

Note: If the temperature on the screen of the central unit does  
not update within a maximum of 2 minutes, check again in the  
application the status of the thermostat (Online or Offline) and  
the set temperature.  
Pairing the two units  
Warning: The two units come paired from the factory. Perform  
this procedure only if absolutely necessary.  
If the thermostat appears Offline in the application, the signal  
icon  
is missing from the screen, the “Heating on” LED on the  
receiver unit is off and the units do not communicate with each  
other, perform the pairing procedure below:  
1.  
Long press the pairing button on the receiver unit until the  
“Heating on” LED flashes rapidly.  
2. Turn off the screen of the central unit by pressing the on/  
off button.  
3. When the screen is off, press and hold the M button on the  
central unit until a 4-digit code appears on the screen.  
4. Immediately press the up arrow button to pair with the  
receiver unit.  
5. The “Heating on” LED blinks rarely and then goes out.  
User manual  
14  
GeneralDetails
NamePNi CT36PRO Smart Thermostat Instruction Manual
MakePNI
LanguageEnglish
FiletypePDF (Download)
File size1.12 MB
Download PDF
1 Star2 Stars3 Stars4 Stars5 Stars (1 votes, average: 5.00 out of 5)
Loading...
PNI-CT40 Smart Wireless Thermostat User Manual
PNI-CT40 Smart Wireless Thermostat User Manual
PNI CT25PW WIFI Smart Thermostat User Manual
PNI CT25PW WIFI Smart Thermostat User Manual
PNi ACRF8508 Wireless Programmable Room Thermostat Instruction Manual
PNi ACRF8508 Wireless Programmable Room Thermostat Instruction Manual

PNi CT36PRO Smart Thermostat Instruction Manual