Home > Micro-Air > Micro-Air EasyTouch RV 353 Thermostat Instruction Manual

Micro-Air EasyTouch RV 353 Thermostat Instruction Manual

Operational Modes  
All modes operate the overhead fan and/or a heating or cooling cycle based on the current  
heating or cooling set-point, relative to the inside temperature.  
Fans and Fan Only Mode  
This mode lets the fan to operate based on the chosen (8) Fan Speed.  
This will circulate the air without operating any heating or cooling cycles.  
Fan Speed  
Fan Only Mode  
C
o
o
l
O
n
l
y
M
o
d
e
This mode only runs a cool cycle to maintain the cooling set-point in the  
space. Set the (7) Operational Mode button to Cool Only and the desired (8) Fan  
Speed, where behavior will then be based on Table 5. A time delay of  
approximately three minutes occurs before a cooling cycle begins. This allows  
pressure to equalize in the system to prevent compressor damage.  
Cool Only Mode  
Environment (°F)  
Inside (Setpoint + 1°)  
Cycle Operation  
None  
Auto Fan Operation  
Off  
Inside 2° Above Setpoint  
Inside 3°- 5°Above Setpoint  
Inside 6° Or More Above Setpoint  
Inside Returns Setpoint  
Cooling Cycle Begins  
Cooling Cycle Continues  
Cooling Cycle Continues  
On Low  
On Medium  
On High  
Cooling Cycle Terminates  
Table 5 - Cool Only Mode Operation  
Runs 30 More Seconds, Off  
Note: Table 5 operation may be different based on the Gap settings. See section Temperature Gap  
(Hysteresis) for details.  
Furnace Only or Aqua Only Mode  
Aqua Only Mode  
This mode only runs an auxiliary heating cycle to maintain the heating set-  
point in the space. Set the (7) Operational Mode button to Furnace Only or Aqua  
Only and the desired overhead (8) Fan Speed, where behavior will then be based  
on Table 6. Furnace fan speed is not configurable from the thermostat. See section  
Furnace/Aqua Icons for details on the auxiliary heating icon.  
Furnace Only Mode  
Environment (°F)  
Cycle Operation  
Auto Fan Operation  
Inside (Setpoint - 1°)  
Inside 2° Below Setpoint  
Inside 3°- 5° Below Setpoint  
None  
Off  
Auxiliary Heat Cycle Begins  
Auxiliary Heat Cycle Continues  
On Low  
On Medium  
On High  
Inside 6° Or More Below Setpoint Auxiliary Heat Cycle Continues  
Inside Returns Setpoint  
Auxiliary Heat Cycle Terminates Runs 30 More Seconds, Off  
Table 6 - Furnace Only Mode Operation  
Note: Table 6 operation may be different based on the Gap settings. See section Temperature Gap  
(Hysteresis) for details.  
10  
©2022 Micro-Air Corp  
May 10, 2022, revision 1.1  
     
GeneralDetails
NameMicro-Air EasyTouch RV 353 Thermostat Instruction Manual
MakeMicro-Air
LanguageEnglish
FiletypePDF (Download)
File size0.41 MB
Download PDF
1 Star2 Stars3 Stars4 Stars5 Stars (1 votes, average: 5.00 out of 5)
Loading...
micro-air EasyTouch 357 Multi Zone Replacement Thermostat Instruction Manual
micro-air EasyTouch 357 Multi Zone Replacement Thermostat Instruction Manual
Micro-Air EasyTouch RV 353 Touch Screen Thermostat Instruction Manual
Micro-Air EasyTouch RV 353 Touch Screen Thermostat Instruction Manual
Micro-Air 359 Touchscreen Thermostat Instruction Manual
Micro-Air 359 Touchscreen Thermostat Instruction Manual
micro-Air EasyTouch RV 351 Thermostat User Manual
micro-Air EasyTouch RV 351 Thermostat User Manual
Micro Air ETRV EasyTouch RV Thermostat Instruction Manual
Micro Air ETRV EasyTouch RV Thermostat Instruction Manual
micro-air EasyTouch RV 356 True Air RV Thermostat User Manual
micro-air EasyTouch RV 356 True Air RV Thermostat User Manual
micro-Air ASY-357-X02 EasyTouch 357 Touchscreen Thermostat User Manual
micro-Air ASY-357-X02 EasyTouch 357 Touchscreen Thermostat User Manual
micro-Air EasyTouch 352 Thermostat User Manual
micro-Air EasyTouch 352 Thermostat User Manual
Micro-Air EasyTouch 355 Touch Screen Thermostat User Manual
Micro-Air EasyTouch 355 Touch Screen Thermostat User Manual
Micro-Air 351 Air Conditioner Digital Thermostat User Guide
Micro-Air 351 Air Conditioner Digital Thermostat User Guide

Micro-Air EasyTouch RV 353 Thermostat Instruction Manual