Home > heatmiser > heatmiser neoStat Touch-e Touchscreen Electric Floor Heating Thermostat Owner’s Manual
heatmiser neoStat Touch-e Touchscreen Electric Floor Heating Thermostat Owner’s Manual
Installation Procedure
Do
Mount the thermostat at eye level.
Read the instructions fully so you get the best from our product.
Don’t
Do not install near to a direct heat source as this will affect functionality.
Do not push hard on the LCD screen as this may cause irreparable damage.
This thermostat is designed to be flush mounted and requires a back box of 35mm
(minimum depth) to be sunk into the wall prior to installation.
Step 1
Using a small screwdriver, slightly loosen the screw from the bottom face of the
thermostat. You can then carefully separate the front half from the back plate.
Step 2
Place the LCD display front plate somewhere safe.
Terminate the backplate as shown in the diagram on page 38 of this booklet.
Step 3
Screw the back plate securely into the back box.
Step 4
Replace the front of the thermostat onto the back plate, by locating the pins in the
socket then insert the top edge first. Now push in the bottom edge, securing it in
place with the retaining screw.
5
neo
Stat Series
| General | Details |
|---|---|
| Name | heatmiser neoStat Touch-e Touchscreen Electric Floor Heating Thermostat Owner’s Manual |
| Make | heatmiser |
| Language | English |
| Filetype | PDF (Download) |
| File size | 0.64 MB |

heatmiser Slimline-RF V3 Programmable Wireless Thermostat Instructions

heatmiser DS1-V2 Thermostat Owner’s Manual

heatmiser neoStat-e Electric Floor Heating Thermostat Instructions

heatmiser neoStat-Pro Smart Thermostat Instruction Manual

heatmiser Slimline-B V3 Programmable Room Thermostat Owner’s Manual





















































