Home > heatmiser > heatmiser neoStat Touch-e Touchscreen Electric Floor Heating Thermostat Owner’s Manual
heatmiser neoStat Touch-e Touchscreen Electric Floor Heating Thermostat Owner’s Manual
Recalibrating the Thermostat
This thermostat is factory set and doesn’t need re-calibrating under normal operation!
To calibrate, follow the step below.
•
Press and hold the key for 3 seconds ...................................................................
The display will go blank showing only ‘Setup’ and ‘Clock’.
Press and hold the key for 10 seconds .................................................................
The current temperature will appear on the display.
•
•
•
•
Use the ‘Up/Down’keys to configure the new temperature value ..................
Press the ‘DONE’key to confirm the change and the display will go blank
Press the key once to turn the thermostat ‘ON’ .................................................
Error Codes
The thermostat will display an error code if there is a fault with the temperature sensor,
these error codes are explained below.
E0 = The internal sensor has developed a fault.
E1 = The remote FLOOR probe has not been connected.
The remote FLOOR probe has not been wired correctly.
The remote FLOOR probe is faulty.
E2 = The remote AIR SENSOR probe has not been connected.
The remote AIR SENSOR probe has not been wired correctly.
The remote AIR SENSOR is faulty.
neo
28
StatTouch-e
| General | Details |
|---|---|
| Name | heatmiser neoStat Touch-e Touchscreen Electric Floor Heating Thermostat Owner’s Manual |
| Make | heatmiser |
| Language | English |
| Filetype | PDF (Download) |
| File size | 0.64 MB |

heatmiser Slimline-RF V3 Programmable Wireless Thermostat Instructions

heatmiser DS1-V2 Thermostat Owner’s Manual

heatmiser neoStat-e Electric Floor Heating Thermostat Instructions

heatmiser neoStat-Pro Smart Thermostat Instruction Manual

heatmiser Slimline-B V3 Programmable Room Thermostat Owner’s Manual





















































