heatit Z-TRM3 WiFi Thermostat Instruction Manual
1. INTRODUCTION
HEATIT
Z-TRM3
Installers manual
Heatit Z-TRM3 is an electronic thermostat for electrical floor heating,
designed to be mounted in a standard flush box. The thermostat has
a built-in Z-Wave chip that can be connected with Home Automation
systems. Heatit Z-TRM3 is equipped with a single-pole relay and fits
into System 55 frames. The thermostat can withstand a load of max
16A /3600W at 230VAC.
Firmware 4.0
01.01.2021
Ver 2021-B (15.10.21)
NB! If the sensor mode is changed to A or AF mode then a room
sensor compensation process will start, which limits maximum power
output to 75%. The thermostat adapts to the environment within a
few days. No internal sensor calibration should be performed during
the first few days.
2. STATEMENT REGARDING PRODUCTS FROM MULTIPLE
MANUFACTURERS
Please read this before installation
This device may be used with all devices certified with the Z-Wave
Plus™ certificate and should be compatible with such devices
produced by any manufacturer. Every primary controller is different
depending on the manufacturer, their target audience and intended
use/application. Please review the functionalities implemented by the
primary controller you intend to use with our Z-Wave Plus certified
device to ensure that it provides the necessary controls to take full
advantage of our product’s capabilities.
TABLE OF CONTENTS
1
2
3
4
5
Introduction
Statement regarding products from multiple manufacturers
Behavior within the Z-Wave™ network
Quick Start
Installation
5.1 Controls
6
7
Add/Remove
3. BEHAVIOR WITHIN THE Z-WAVE™ NETWORK
6.1 Method 1: Standard (Manual)
6.2 Method 2: SmartStart (Automatic)
Factory Reset
This device may be operated within any Z-Wave network with
Z-Wave-certified devices from other manufacturers. All non-battery-
operated nodes within the network will act as repeaters regardless of
manufacturer to increase the reliability of the network. On delivery, the
device does not belong to any Z-Wave network.
7.1 Startup
8
9
Principles of regulation
Programming thermostat
The device needs to be added to an existing network to communicate
with the other devices within it. Devices may also be removed from
a network. The add/remove processes are initiated by the primary
controller of the Z-Wave network.
10 Temperature shown in display
11 Standby and main screen
12 Choice of sensor
13 Selecting the right Ohm value for your external floor sensor
14 Calibration
4. QUICK START
15 Brightness
1. Switch off the mains supply (disable the fuse).
2. Open the wall switch box.
16 Hysteresis (dIF)
17 Min/Max temperature settings
18 Fast functions from Standby / Main Screen
18.1 Display on/off (don/doF)
18.2 Child lock (Loc)
3. Connect wires according to the labeling described in
chapter 5 ”Installation”.
4. After verifying the connections, switch the mains supply back on.
5. Set the primary controller in add mode (security/non-security).
6. Press and hold the center button until“OFF”is shown on the display
(approx. 10 seconds).
19 Error codes
20 QR-Code placement (DSK)
21 Security
7. Press down button until you reach“CON”, press and hold until the
display shows a rotating light pattern.
22 Node Information Frame
23 Associations
8. The thermostat will display“INC”when the thermostat is successfully
added.
23.1 Setting and removing associations
23.2 Multichannel support
23.3 No multichannel support
23.4 Association groups
NB! If adding/removing fails, Err (error) will appear.
24 Configuration parameters
25 Command class specifications
26 Product information
| General | Details |
|---|---|
| Name | heatit Z-TRM3 WiFi Thermostat Instruction Manual |
| Make | HEATIT |
| Language | English |
| Filetype | PDF (Download) |
| File size | 0.19 MB |
(1 votes, average: 5.00 out of 5)
Loading...
heatit Z-TRM6 DC Z Wave Electronic Thermostat Instruction Manual
HEATIT Z-TRM3 Thermostat User Guide
Heatit Z-TEMP2 Thermostat Installation Guide
HEATIT Z-Temp3 is a Battery Operated Thermostat Instruction Manual
4512673 Heatit ZM Thermostat 16A User Guide
HEATIT Z-TRM6 Matt Z-Wave Thermostat User Guide
HEATIT 54 304 59 DIN Smart Thermostat Installation Guide
HEATIT 54 305 41 WiFi6 Thermostat Installation Guide
HEATIT Z-TEMP3 Thermostat User Guide
heatit ET-7AW Touchscreen Programmable Thermostat User Manual
COOKING PERFORMANCE GROUP 351030208 Retrofit Thermostat Instructions
Danfoss RAE Radiator Thermostat Installation Guide
hansgrohe AXOR STARCK X Concealed Thermostat with Shut Off Valve Instruction Manual
Mi-Heat GH35EU Digital Greenhouse Thermostat User Manual
nvent NUHEAT Signature Thermostat User Manual
VENSTAR Fan Coil Thermostat T2100 / T2150 User Guide
UNILUX TA640FCW-ULX HVAC Thermostat User Manual
ENGO CONTROLS EFAN-230W WIFI 230V Fan Coil Thermostat User Guide
Honeywell CM907 Programmable Room Thermostat User Guide
GENERAL LIFE MITRA 260S RF Room Thermostat User Manual