Danfoss RAE Radiator Thermostat Installation Guide

1

Danfoss Radiator Thermostat RAE  

Installation Guide  

Fitting the snap-lock sensor  

1.Prise the green protec-  

tive cap off the valve.  

2.Offer sensor onto valve  

ensuring that scale  

pointer is at top.  

3.Press the sensor firmly  

onto valve until snap-  

lock "clicks"  

4. If required firmly press  

anti-theft lock into inner  

ring to prevent unauthor-  

ised removal  

Removing the snap-lock sensor  

2. Turn sensor to max.  

setting.  

3. Hold outer ring whilst  

turning inner ring anti-  

clockwise to release  

snap-lock mechanism.  

The sensor can now be  

separated from the  

valve.  

Resetting the snap-lock  

4. Having removed sensor  

from valve, ensure sen-  

sor is set to max.  

1. prise out  

antitheft lock  

with Danfoss  

tool or a small  

screwdriver.  

5. Hold outer ring whilst  

turning arrow mark on  

inner ring towards scale  

pointer until stop.  

Adjusting temperature control range  

T

I

II  

III  

IIII  

I

-

I

II  

III  

IIII  

I

8

12  

16  

20  

24  

28 °C  

8

12  

16  

20  

24  

28 °C  

Setting the upper limit:  

e.g. III as the highest pos-  

sible temperature selec-  

tion:  

Setting the lower limit:  

e.g. II as the lowest possi-  

ble temperature selection:  

1. Turn the head to min.  

position.  

1. Turn the head to max.  

position  

2. Keep the limiter tab to  

the left of the black scale  

pointer pressed down  

2. Keep the limiter tab to  

the right of the black  

scale pointer pressed  

down with a small  

screwdriver.  

with a small screwdriver.  

3. Turn the head to II. You  

can now release the tab.  

3. Turn the head round to  

III and release the tab.  

2

3

2

3

VIEW FULL SCREEN PDF MANUAL

General	Details
Name	Danfoss RAE Radiator Thermostat Installation Guide
Make	Danfoss
Language	English
Filetype	PDF (Download)
File size	0.09 MB

Download PDF

(1 votes, average: 5.00 out of 5)

Loading...

• ALL THERMOSTAT INSTRUCTIONS & USER MANUALS
• Danfoss

Danfoss RAE Radiator Thermostat Installation Guide Overview

Summary of Contents

• Page 1: Danfoss radiator thermostat RAE installation guide Fitting the snap-lock sensor involves removing the green protective cap and pressing the sensor onto the valve until it clicks. To remove the snap-lock sensor, turn the sensor to the maximum setting and hold the outer ring while turning the inner ring anti-clockwise. Resetting the snap-lock requires removing the sensor and ensuring it is set to maximum before using a tool to prise out the anti-theft lock. Adjusting the temperature control range allows for setting both upper and lower limits for temperature selection. Setting the upper limit involves turning the head to the maximum position and pressing down the limiter tab. Setting the lower limit requires turning the head to the minimum position and pressing down the limiter tab on the left of the scale pointer.