Home > EPH CONTROLS > EPH CONTROLS 2023-03-10 RFR-RF Room Thermostat Instruction Manual
EPH CONTROLS 2023-03-10 RFR-RF Room Thermostat Instruction Manual
Page 1 of 2
Operating Instructions
RFR - RF Room Thermostat
Contents
1. Factory default settings
2. Specification & wiring
3. Mounting
CAUTION!
4. Installation
5. Button / symbol description
6. Resetting the thermostat
7. Adjusting the setpoint temperature
8. Boost function
Only qualified electricians or authorised
service staff are permitted to open the
thermostat.
9. Lock function
10. To connect the RFR thermostat to the
R_7-RF programmer
11. To disconnect the RFR thermostat from
the R_7-RF programmer
Ensure that this wireless enabled
thermostat is installed 1 metre from any
metalic object, television, radio or wireless
internet transmitter.
Important: Keep this document
Prior to setting the thermostat, it is neccessary to complete all required settings
described in this section.
1. Factory default settings
5. Button / symbol description
Temperature indicator:
Switching differential:
In built frost protection:
Keypad lock:
°C
Wireless symbol
0.4°C
5°C
Off
Heating ON symbol
Room temperature
Battery low symbol
Boost button
2. Specifications & wiring
Set point handwheel
Power Supply:
2 x AAA Alkaline Battery
50 uA
Power consumption:
Battery replacement:
Temp. Control Range:
Dimensions:
Once per year
5...35°C
84 * 84 * 30mm
NTC 10K Ohm @ 25°C
°C
Temp. sensor:
Temp. indication:
Code button
Reset button
3. Mounting
The mounting height should be 1.5 meters above the floor level. The
thermostat should be wall mounted in the room where the heating is to
be controlled.
6. Resetting the thermostat
Press the
button on the bottom of the thermostat, the front housing
The place of installation should be chosen so that the sensor can measure
the room temperature as accurately as possible.
will detach from the baseplate.
Insert the batteries into the thermostat.
Choose the mounting location to prevent direct exposure to sunlight or
other heating / cooling sources when mounted.
Press the reset button on the PCB, ‘NO’will flash on the screen.
Rotate the hand wheel clockwise until ‘YES’appears on the screen.
Press the hand wheel once to confirm the setting.
The unit can be fitted to:
1. Recessed conduit boxes
2. Surface mounting boxes
3. Directly on walls
The thermostat has now been reset and the current temperature will
appear on the screen.
4. Table mounting with stand provided
4. Installation
7. Adjusting the setpoint temperature
Press the button on the bottom of the thermostat.
The front housing will detach from the baseplate.
Insert the batteries (provided) into the thermostat.
Mount the unit as described in section 3.
Rotate
Press
clockwise to increase the target temperature.
or wait 5 seconds. The target temperature is now saved.
anti-clockwise to decrease the target temperature.
or wait 5 seconds. The target temperature is now saved.
Rotate
Press
Offer the baseplate up to the thermostat. Snap it into position to close.
EPH Controls Ireland
EPH Controls UK
2023-03-10_RFR_OpIns_PK
| General | Details |
|---|---|
| Name | EPH CONTROLS 2023-03-10 RFR-RF Room Thermostat Instruction Manual |
| Make | EPH CONTROLS |
| Language | English |
| Filetype | PDF (Download) |
| File size | 0.11 MB |
(1 votes, average: 5.00 out of 5)
Loading...
EPH CONTROLS eTRV-HW Smart Cylinder Thermostat User Guide
EPH CONTROLS eTRV-HW Smart Hot Water Thermostat Instruction Manual
EPH CONTROLS eTRV Smart Radiator Thermostat Instruction Manual
EPH CONTROLS 20221026 RFRA – RF Room Thermostat Instruction Manual
EPH CONTROLS CDTP2 Hardwired Room Thermostat Instruction Manual
EPH Controls CDT2-24 24V Room Thermostat Installation Guide
EPH CONTROLS RFCA RF Cylinder Thermostat Instruction Manual
EPH CONTROLS PR092K7 RF Cylinder Thermostat Instruction Manual
EPH CONTROLS COMBIPACK2 Smart Thermostat with Automation and Optimum Start Instructions
EPH CONTROLS CRT2 Room Thermostat Instruction Manual
EPH Controls 2023-03-10 RFR-RF Manual: Questions and Answers
EPH Controls 2023-03-10 RFR-RF specifications
| Power supply | 2 x AAA Alkaline Battery |
| Differential | 0.4°C |
| Dimensions | 84 * 84 * 30mm |
Can I use the EPH Controls boost function if the programmer is set to Off?
Yes. The boost function overrides the programmer when it's timed to be Off, providing 1, 2 or 3 hours of heating. Instruction Manual, p. 2
What do the symbols on the EPH Controls display screen represent?
| Symbol | Meaning |
|---|---|
| Wireless symbol | Device is connected to the programmer |
| Heating ON symbol | Heating is active |
| Battery low symbol | Batteries need replacement |
| Keypad symbol | Thermostat is locked |
EPH Controls 2023-03-10 RFR-RF compared with other EPH Controls thermostats
| Specification | EPH Controls 2023-03-10 RFR-RF | EPH Controls CP4B | EPH Controls PR092K7 | EPH Controls RFRA |
|---|---|---|---|---|
| Power supply | 2 x AAA Alkaline Battery | 2 x AA Alkaline Batteries | 2 x AAA Alkaline Battery | 2 x AAA Alkaline Battery |
| Differential | 0.4°C | 0.4˚C | 5°C | 0.2°C |
| Dimensions | 84 * 84 * 30mm | 130 x 99 x 25mm | 84 * 84 * 30mm | 84 * 84 * 30mm |
More EPH Controls thermostat manuals
hager 20441404 Thermostat Owner’s Manual
thermokon JOY 5DO Digital Room Thermostat User Manual
terneo v3G33 Simple Heat Control Thermostat Instruction Manual
GENERAL HT220S Smart Room Thermostat Instruction Manual
DIGITEN WTC100 Wireless Programmable Thermostat User Manual
Danfoss 013R9355 Radiator Thermostat Instructions
INTIEL TD-3.1.1 Programmable Differential Thermostat User Manual
MYSAIR MS20 Thermostat User Manual
ROLBIT C124W Under Floor Thermostat Instructions
Orbegozo FDR 65 Litres Adjustable Thermostat Instruction Manual