GENERAL HT220S Smart Room Thermostat Instruction Manual

1

2

TECHNICAL DATA  

RoomThermostat  

ROOM THERMOSTAT PLACEMENT  

RECEIVER INSTALLATION  

ENGLISH  

The room thermostat needs to be placed in the room which is used most  

frequently. For instance; the living room or lounge. Placing the room  

thermostat in a spot that has air circulation like the entrance of a room or the  

side of the window should be avoided. Also anywhere close to  

heating/cooling units such as a radiator, stove, and spots that get direct sun  

lights would not be suitable. The room thermostat needs to be located  

above the floor 150 cm in height. Few trials may be made to find the most  

convenientspot.  



First, shut down your heating/cooling unit and your heating/cooling unit's  

powersourcewithallelectricalcurrent(fuse, socket, etc.)  

As shown in the connection diagram, connect one end of the  

heating/cooling unit connection cable to the COM and the other to the NO  

input of thereceiver.  

Dimensions (H/L/W)  

Operating Current  

85mm / 125mm / 24mm  



3V DC (2 x AAA Alkaline Battery)  

SMART ROOM THERMOSTAT  

Temperature Measurement Accuracy 0.1^oC  

Operating Sensitivity  

Operating Temperature Range  

Battery Life  

(-2.0^oC) – (+2.0^oC)  

(5^oC) – (40^oC)  

generallife.com.tr  



Connect the other ends of the cable -which you connected to the receiver-  

to the room thermostat connection terminal as shown in your  

heating/cooling unit'susermanual.  

1 Year (2 x AAA)  

(-10^oC) – (+50^oC)  

(-20^oC) – (+60^oC)  

Operating Temperature  

Storage Temperature  







You must first connect the receiver power cable to the receiver and then to  

thefuse towhich theheating/cooling unit isconnected.  

After completing the cable connection process, first, turn on yourfuse and  

thenyourheating/cooling unit.  

Finish the installation of the room thermostat to pair the receiver with the  

room thermostat.  

HT220S SMART USER MANUAL  

min. 20 cm  

Receiver  

Dimensions (H/L/W)  

Operating Current  

Relay NO Switching Current  

90mm / 90mm / 25mm  

230V AC  

7A (240VAC – Resistive Load)  

10A (120VAC – Resistive Load)  

(-20^oC) – (+60^oC)  

WHAT IS A SMART ROOM THERMOSTAT?  

A smart room thermostat is a device that allows you to control your heating  

equipment viaAPPwiththeinternetevenwhenyouarenot athome.  

Storage Temperature  

ROOM THERMOSTAT  

1

RECEIVER WIRING DIAGRAM  

AC  

HOW DOES HT220S SMART WORK?  

COM  

NO  

(230V)  

HT220S SMART is a smart wireless room thermostat.You can control it with  

the mobile applicationafter you pair your room thermostatwith the receiver,  

andcompletetheinstallationofthesmartreceiver.  

2

3

WHAT ARE THE ADVANTAGES OF THE HT220SSMART?  

4

5









You can control your home's temperature via its mobile application, no  

matterwhereyouarein theworld.  

You can easily create daily and weekly schedules via its mobile  

application.  

You can place the room thermostat anywhere in your home, thanks to its  

usewithbatteries.  

It ensures that your living space stays at the desired temperature at any  

time. In this way, you can save up to 30% on your bills by preventing your  

heating unitfrom working unnecessarily.  

HEATING/COOLING UNIT  

6

BATTERY PLACEMENT  

1

2

Battery Indicator  

Heating Indicator  

- If the Heating Indicator is blinking, the heating unit is working.  

- If the Heating Indicator is steady, the heating unit is not working.  

Cooling Indicator  

- If the Cooling Indicator is blinking, the cooling unit is working.  

- If the Cooling Indicator is steady, the cooling unit is not working.  

Room Temperature  

Set Temperature  

ON/OFF and Temperature Setting Button  

Warning!  

Operations within the heating/cooling unit or the electricalinstallation must  

becarriedout byprofessionally qualifiedpersons.  

PAIRING THE ROOM THERMOSTAT WITH THE RECEIVER  

RULES THAT NEED TO BE OBSERVED FOR SAFETY  

1-Be sure to read the user manual before using the device and its  

equipment.  

3



To pair the room thermostat with the receiver, press the “Manual  

Operation Button” and “Wi-Fi Pairing Button” together at the same time  

and seethereceiver'sfastblinking redLED.  

4

5

6

2-Opening, disassembly, or use of plastic parts of the product and  

equipment otherthantheintended purpose areoutof warranty.  

3-Please make sure that the sockets to which you connect your devices and  

equipment areattherecommended voltagevaluein theusermanual.  

4-Keep away and protect your product and its equipment from all kinds of  

externalsubstancessuch asliquid, dust, heat, etc.  

5-Do not expose the device cables to any jamming and pressure. Take care  

to connect the devices' energy connection to the sockets you can always  

reach.  

6-Turn off the electrical power to prevent damage to your device and  

apparatusincaseof lightning and thunderstorms.  

7-Turn off theelectricalpowerwhen yourdeviceisnotused foralong time.  

8-Your devices and equipment should be used by paying attention to the  

matters stated in the user manual. In case of damage and malfunctions,  

arising from improper use (contact with liquid, falling to the ground, etc.)  

definitelyaskfortheinstaller'shelp.  









Pressthebutton for3seconds whileyourdeviceisturned off.  

Pressthebutton until “  

”thepairing menu appears.  

Note: During active use of the room thermostat, the symbols indicated by 2,  

3and 5willnotappearon thescreen.  

Turn yourroom thermostat'sbutton whiletheLEDisfastblinking red.  

If the pairing is successful, the fast red flashing LED on the receiver will be  

steady.  

Press the screwdriver forward from the space at the bottom of the room  

thermostat, bend the tabs and separate the front cover. Insert 2 new AAA  

alkaline batteries in the battery housing with the correct battery direction.  

Replace both batteries at the same time. Align the front part of your room  

thermostat with the corresponding slot on the back, and then push gently  

until thethermostatsnaps into place.  

RECEIVER  



Thereceiverand room thermostathavebeen pairedwitheachother.  

1-Manual Operation Button:  

Deactivates the receiver and allows users  

to manually use the heating/cooling unit.  

2-Wi-Fi Pairing Button:  

Makes the receiver ready for smart  

installation.  

3-Receiver LED Light  

4- Receiver Power Cable Input  

5- Heating/Cooling Unit Connection Cable  

Input  

SMART RECEIVER SETUP  



1

For smart receiver setup, download the application from App Store or  

Google Play or scan the QR code below with your smartphone. In this way,  

you will be able to download the mobile application from App Store or  

Google Play to your smartphone. (You may be required to have a QR code  

reader application depending on the brand and model of your phone, for  

thisprocess.)  

2

Low Battery Warning: When the “  

” icon appears on the screen, it means  

3

“low battery warning”. It is recommended to replace the batteries when this  

warning appears.  

Warning: When the product is not used for a long period (more than 15 days),  

remove the batteries. Otherwise, malfunctions that may occur would be out of  

warranty. Pleasethrowyourdead batteriesinto thewastebin forbatteries.  

Click to download.  

9-Call our service for maintenance and repair of HT220S SMART and its  

equipment. Maintenance and repair of the device and equipment should be  

carried out only by the technical service of ISIPARK A.S. and its authorized  

services, spare parts, and accessories specified by the company should be  

used.  

RECEIVER PLACEMENT  

The important things to note for the Receiver placement  

are avoiding physical contact between the receiver and  

the heating/cooling unit, and protecting it against  

materialssuch asliquid, dust, etc.  

4

5

RECEIVER LED DESCRIPTIONS  



Complete the user registration process by opening the mobile application  

thatyoudownloaded.  

Blinking Red  

The receiver did not get any signal from the  

HT220S SMARTand EQUIPMENT  

heating/cooling unit for 22 minutes or longer and  

the heating/ cooling unit has shut down.  

Waiting for a pairing signal from the room thermostat.  

The receiver and the room thermostat have been paired.  

Smart installation has not been completed.  

The receiver is in Bluetooth searching mode.  

Smart installation has been completed.  

The heating/cooling unit is not working.  

The heating/cooling unit is working.  





OpentheBluetooth fromyourmobile phone'ssettings.  

After you completed the user registration process, press the “+” button in  

the top-right corner of the main screen of the application, Press the  

receiver'sWi-Fipairing button for5seconds.  

TheLEDon thereceiverwillstart toblink green.  

Setup will begin with Bluetooth in the application. When the device is  

found, pressthe“Add”button.  

Press the “+” button near the W Modem device and press the “Next”  

button aftermakingsurethatyouenteredthecorrectWi-Fiinformation.  

Wait until the setup process is completed. When you saw the green  

approvalsymbol on the W Modem, press the “Done” button in the top-right  

corner.  

The devices should be placed to minimize the damage to the received and  

transmittedsignals bypayingattentiontothefollowingpoints;  

HT220S SMART  

Holder Alkaline  

Battery  

Receiver  

Dowels and  

Screws  

Fast Blinking Red  

Steady Red  

Room Thermostat  



Thedevicesshould notbemounted on metalsurfaces.  

The devices should not be installed close to electrical cables and  

electronic equipment such ascomputersand televisionunits.  

The devices should not be installed near large metal structures or other  

building materials using fine metal meshes such as special glass or  

specialconcrete.  







Blinking Green  

Steady Green  



Steady Turquoise  

3 Short Red Blinking  





Shut the heating/cooling unit down signal has  

reached the receiver.  





Distance between the room thermostat and the Receiver should not  

exceed20metersor2floors.  

The receiver must be installed at least 50 cm away from the  

heating/cooling unit.  

3 Short Green Blinking Operate the heating/cooling unit signal has  

reached the receiver.  

Blinking Red and Green The heating/cooling unit is working in manual mode.  

2

1

3

4

VIEW FULL SCREEN PDF MANUAL

General	Details
Name	GENERAL HT220S Smart Room Thermostat Instruction Manual
Make	GENERAL
Language	English
Filetype	PDF (Download)
File size	2.03 MB

Download PDF

(1 votes, average: 5.00 out of 5)

Loading...

• ALL THERMOSTAT INSTRUCTIONS & USER MANUALS
• GENERAL

GENERAL HT220S Smart Room Thermostat Instruction Manual Overview

Summary of Contents

• Page 1: The room thermostat needs to be placed in the room which is used most frequently. Avoid placing it in spots with poor air circulation or near heating/cooling units. The thermostat should be located 150 cm above the floor. Shut down your heating/cooling unit and its power source before installation. Connect the heating/cooling unit connection cable to the receiver as shown in the connection diagram. A smart room thermostat allows you to control your heating equipment via an app when you are not at home. You can control your home's temperature via its mobile application, regardless of your location. You can create daily and weekly schedules through the mobile application. The receiver and room thermostat must be paired for proper operation. Operations within the heating/cooling unit must be carried out by professionally qualified persons. To pair the room thermostat with the receiver, press the “Manual Operation Button” and “Wi-Fi Pairing Button” simultaneously. The receiver must be placed away from the heating/cooling unit and protected from liquids and dust. The devices should not be installed close to electrical cables or large metal structures to minimize signal interference.
• Page 2: Heating/Cooling Unit Room thermostat temperature calibration Temperature sensors used in room thermostats are highly sensitive. The warranty period starts from the invoice date and is warranted against manufacturing defects for 2 years. The repair period of the product cannot exceed 20 working days. The customer can make complaints and appeals to consumer courts or consumer arbitration committees. Your room thermostat has heating and cooling modes. You can reset your room thermostat to its default factory settings. Your room thermostat measures sudden temperature changes with its open window detection feature. If the room thermostat detects a decrease in room temperature of more than 5 degrees within 15 minutes, it switches to alarm state and turns off the heating system.