EMOS P56201BUF Floor Heating Thermostat User Guide

1

2

3

4

5

6

7

8

9

10

11

12

13

14

15

16

P56201BUF  

GB | Floor Heating Thermostat  

Contents  

Important...........................................................................................................................2  

Technical specifications ....................................................................................................3  

Description of the Thermostat Screen – Icons and Buttons.............................................4  

Installing the Thermostat..................................................................................................6  

Mobile Application .............................................................................................................8  

Advanced Settings...........................................................................................................10  

Troubleshooting FAQ........................................................................................................14  

Upkeep and Maintenance ................................................................................................15  

GB | 1  

VIEW FULL SCREEN PDF MANUAL

General	Details
Name	EMOS P56201BUF Floor Heating Thermostat User Guide
Make	EMOS
Language	English
Filetype	PDF (Download)
File size	0.4 MB

Download PDF

(1 votes, average: 5.00 out of 5)

Loading...

• ALL THERMOSTAT INSTRUCTIONS & USER MANUALS
• EMOS

EMOS P56201BUF Floor Heating Thermostat User Guide Overview

Summary of Contents

• Page 1: Important Technical specifications Description of the thermostat screen – icons and buttons Installing the thermostat Mobile application Advanced settings Troubleshooting FAQ Upkeep and maintenance
• Page 2: The P56201BUF thermostat is designed for controlling underfloor heating. Read the thermostat manual carefully before using the device for the first time. Turn off power before installing the thermostat. Follow prescribed standards during installation.
• Page 3: Technical specifications Switched load: max. 230 V AC; 16 A for resistive load Temperature measurement: 0 °C to 95 °C, 0.5 °C resolution Temperature setting: 1 °C to 70 °C, in 0.5 °C increments Temperature differential setting: 0.5 °C to 2.5 °C, in 0.5 °C increments Calibration of set temperature: -9 °C to 9 °C, in 1 °C increments Power supply: 230 V Enclosure rating: IP20 Accessories: 3 m floor sensor (ø 8 mm), installation equipment WiFi frequency: 2.4 GHz, max. 25 mW e.i.r.p. Dimensions: 86 × 86 × 43 mm
• Page 4: Description of the thermostat screen – icons and buttons
• Page 5: The document describes various icons and functions displayed on a thermostat screen. The icon indicates the day of the week. The number of the day of the week ranges from 1 (Monday) to 7 (Sunday). The icon shows the temperature set for the given mode. If the icon is displayed, it shows the current room temperature. The icon indicates the temperature from the floor sensor. The icon indicates that Manual Mode is active. The icon indicates that Holiday Mode is active. The icon indicates that Weekly Mode is active. The icon indicates that the thermostat is currently heating up the room. The icon indicates connection to the Cloud (AP).
• Page 6: Installing the thermostat requires disconnecting the heating system from the mains power to prevent potential injury. The placement of the thermostat significantly affects its functioning. Choose a location where family members spend most of their time, preferably on an inside wall with free air circulation and no direct sunlight. Avoid placing the thermostat near heat sources or close to a door to ensure accurate temperature maintenance. Use a screwdriver to press on the internal lock and slide out the metal frame. Install the mounting plate onto a suitable junction box. Connect the wires from the junction box to the marked terminals on the thermostat according to the wiring diagram. Reconnect the internal connector and secure the thermostat back onto the mounting plate. Replace the front cover after installation.
• Page 7: Wiring diagram Load – connected device N, L – thermostat’s power supply NTC – floor sensor
• Page 8: Mobile application The thermostat can be controlled using a mobile application for iOS or Android. Download the EMOS GoSmart app for your device. Tap the Log In button if you’ve used the app before. Otherwise, tap the Sign Up button and register.
• Page 9: Pairing with the mobile application involves long-pressing both buttons on the thermostat simultaneously to enter pairing mode. The app requires tapping Add Device and selecting the thermostat icon. Users must follow the app instructions and enter their 2.4 GHz Wi-Fi network name and password. The gateway will pair within 2 minutes, and if it fails, the process should be repeated. Temperature programmes can be chosen in the Calendar Mode tab in EMOS GoSmart settings. There are three types of temperature programmes: 5 + 2, 6 + 1, and 7 days. Each programme allows setting up to 6 time periods for specified days. Time periods can be set in the Weekly Mode Settings tab in the EMOS GoSmart app. The temperature set for each time period will remain active until the next period begins. An example illustrates how different temperatures can be set for various time periods throughout the day.
• Page 10: Advanced settings Temperature calibration allows for optimization by comparing the thermostat's reading with a reference thermometer. Calibration can be adjusted in a range of -9 °C to 9 °C with 1 °C resolution. Temperature differential is the difference in temperature required for switching the system on and off. The internal sensor's temperature differential can be set between 0.5 °C and 2.5 °C. The floor sensor's temperature differential can be set between 1 °C and 9 °C. Maximum and minimum temperature setting limits specify the range of temperatures that can be set on the thermostat. High-temperature protection specifies the maximum temperature the thermostat can heat the system to. Low-temperature protection ensures the thermostat automatically heats the room if the temperature drops below a set value. The thermostat can return to its previous state, stay off, or turn on after a power outage. The active temperature sensor setting defines which sensor detects temperature: internal, floor, or both.
• Page 11: Temporary manual mode activates if Weekly Mode is set on the thermostat and you press the arrow. When it is active, the screen will show both the Weekly Mode and Manual Mode icon. This mode is turned off only by changing to a different mode. The Holiday Mode allows you to set a temperature of choice for an extended period of time. The device can be reset to factory settings. This function can only be activated through the thermostat’s screen. To set the current time and day of the week, press the button to set, in order, minutes, hours, and day of the week. Change the values using the arrows and confirm by pressing the button. To set Weekly Mode, press and hold the button for 3 seconds. Set the hour, minutes, and temperature for the first time period of the workday. Confirm each value by pressing the button again. To activate Holiday Mode, press and hold the button for 3 seconds. Use the arrow to switch the flashing text to ON and confirm. After confirming the interval for Holiday Mode, you will be redirected to setting the temperature. Adjust the temperature using the arrows and confirm to activate Holiday Mode. To access the thermostat’s advanced settings, press and hold the button for 3 seconds. Adjust values/parameters in any mode or function using the arrows. Functions/modes include temperature calibration, which can be set between -9 °C and 9 °C, and temperature differential, which can be set between 0.5 °C and 2.5 °C.
• Page 12: A3 – Screen child lock Can be set to 0 or 1. 0 = lock off. 1 = lock on. The default value is 0. A4 – Status of the device after reconnecting to power after a power outage Can be set to 0, 1 or 2. 0 = same status as before the outage. 1 = thermostat off. 2 = thermostat on. The default value is 0. A5 – Thermostat screen brightness in standby mode Can be set to 0, 1 or 2. 0 = screen off. 1 = room temperature is slightly illuminated on the screen. 2 = room temperature is strongly illuminated on the screen. The default value is 2. A6 – Calendar Mode selection for Weekly Mode Can be set to 0, 1 or 2. 0 = 5+2 (Mo–Fr + Sa + Su). 1 = 6+1 (Mo–Sa + Su). 2 = 7 days. The default setting is 0. A7 – Minimum temperature setting Can be set to between 1 °C and 10 °C. The default setting is 5 °C. A8 – Maximum temperature setting Can be set to between 20 °C and 70 °C. The default setting is 35 °C. A9 – Low-temperature protection Can be set to between 1 °C and 10 °C or turned off completely. The default setting is 5 °C. AA – High-temperature protection of the external sensor Can be set to between 20 °C and 70 °C or turned off completely. The default setting is 45 °C. AB – Setting the limit of the sensor’s high-temperature protection Can be set to between 1 °C and 9 °C. The default setting is 2 °C. AC – Open Window function (temperature) Can be set to between 10 °C and 20 °C or turned off completely. The default setting is off.
• Page 13: Setting B modes and functions on an inactive thermostat screen involves turning off the thermostat screen using the button. When the screen is off, only the bottom bar of buttons is active. To access the thermostat’s advanced settings, press and hold the button for 3 seconds. Adjust values or parameters in any mode or function using the arrows. To navigate in advanced settings, press to access the settings for the next function or mode. The functions/modes are marked as BN, Bo in the top right corner of the screen. Confirm any values you set by pressing the appropriate button. Functions/Modes: - BN – Active temperature sensor, can be set to N1, N2, and N3. - N1 = internal sensor is active. - N2 = floor sensor is active. - N3 = internal and floor sensor is active. - The default value is N1. - Bo – Product information, an option that cannot be adjusted.
• Page 14: Troubleshooting FAQ The screen displays: E1 – fault of the indoor temperature sensor. - Reset the thermostat. - Return the thermostat. E2 – fault of the floor sensor. - Reset the thermostat. - Check that the sensor is connected properly. Check the settings of the active sensor in the thermostat’s menu.
• Page 15: Upkeep and maintenance The product is designed to serve reliably for many years if used properly. Read the manual carefully before using this product. Do not expose the product to direct sunlight, extreme cold, humidity and sudden changes in temperature. Do not place the product in locations prone to vibrations and shocks. Do not subject the product to excessive force, impacts, dust, high temperatures or humidity. Do not expose the product to rain or high humidity, dropping or splashing water. Do not tamper with the internal electric circuits of the product. To clean the product, use a slightly moistened soft cloth. This device is not intended for use by persons whose physical, sensory or mental disability prevents safe use. Do not dispose with domestic waste. Use special collection points for sorted waste.