Danfoss TP5001B-TP5001RF Programmable Room Thermostat User Guide

1

2

3

4

User Guide  

TP5001  

Programmable Room Thermostat  

www.danfoss.com  

VIEW FULL SCREEN PDF MANUAL

General	Details
Name	Danfoss TP5001B-TP5001RF Programmable Room Thermostat User Guide
Make	Danfoss
Language	English
Filetype	PDF (Download)
File size	0.24 MB

Download PDF

(1 votes, average: 5.00 out of 5)

Loading...

• ALL THERMOSTAT INSTRUCTIONS & USER MANUALS
• Danfoss

Danfoss TP5001B-TP5001RF Programmable Room Thermostat User Guide Overview

Summary of Contents

• Page 1: User guide for TP5001 programmable room thermostat.
• Page 2: User guide for TP5001 programmable room thermostats includes an overview of the LCD display and its symbols. The symbols indicate the current set day, heating status, current on/off period, frost protection, schedule mode, and room temperature. Buttons on the thermostat allow for power on/off, timer and program operation, mode changes, and temperature setting. To set the temperature, press the < or > buttons to adjust the desired value, with an adjustment step of 0.5 °C. Away mode can be activated by pressing the M button, and the temperature for this mode can be set in the parameter settings. Setting the date and time involves a sequence of button presses to adjust the year, month, day, hour, and minute. The display will automatically exit after 20 seconds, retaining any changes made. The document includes references to specific model features, such as RF status and battery indicators for certain models. Overall, the guide provides essential instructions for operating and configuring the TP5001 thermostat.
• Page 3: User guide for TP5001 programmable room thermostats includes important features such as frost protection temperature and advanced programmable timer. Frost protection mode activates when the temperature falls below the default setting of 5 °C. The advanced programmable timer allows for automatic comfort temperature settings and energy-saving lower setback temperatures. The timer can be set for 5/2 day setups with four temperature settings. Two programs are available: P1 for weekdays and P2 for weekends, each with four events. Programming involves selecting start hours, minutes, and temperatures for each event. If set to 24-hour mode, only the P1 program is available. Temporary temperature changes can be made at any time, but will revert to the programmed setting afterward. A default program is provided for users who do not create their own schedules. The default program includes specific start times and temperatures for weekdays and weekends.
• Page 4: User guide for TP5001 programmable room thermostats includes instructions for setting control parameters. To enter parameter setting mode, press the M button for 6 seconds. Parameter selection can be made by pressing M and adjusting the range with < or >. Exiting the mode can be done by pressing a designated button or automatically after 20 seconds of inactivity. The document outlines various parameter settings including manual mode, schedule timers, and heat control modes. Temperature limits for high and low settings, frost protection, and away mode temperatures are specified. Timer display options include 24-hour and 12-hour formats. Service due setup and RF pairing settings are included for installer use. Error messages related to sensor failure, EEPROM failure, and temperature limits are listed. The document concludes with a reference to Danfoss Climate Solutions and a version date.