EVERBILT Electric Upper Thermostat Instructions

1

ELECTRIC UPPER THERMOSTAT INSTALLATION  

1. Before servicing the water heater, DISCONNECT/TURN OFF the main power  

breaker feeding the water heater.  

CAUTION: Turn power off at the breaker or fuse panel. Failure  

to do so may result in severe injury.  

2. Before servicing the water heater thermostat, verify with a volt meter that  

voltage/power has been disconnected to the water heater.  

3. For replacement, be sure you have selected the same IDENTICAL thermostat  

type as on the water heater.  

PLEASE NOTE – Upper thermostats are usually not the same as the  

lower thermostat.  

4. Disconnect the thermostat leads, preferably tag the leads before removal from  

the screw terminals to eliminate incorrect wiring problems.  

5. Remove and replace the thermostat from the thermostat bracket. Re-wire per  

diagram in the Use and Care booklet that came with the water heater or your  

tagged leads.  

6. Double check to be sure your wire connections are correct and they are firm and  

tight.  

7. Re-establish the electric power to the water heater.  

8. Replace the protective cover to the thermostat.  

9. Cycle test the water heater to be certain of proper operation.  

Distributed to The Home Depot  

By  

Valencia Pipe Company  

23805 Livingston Ave.  

Valencia, CA 91355  

(661) 257-3923  

www.valenciapipe.com  

info@valenciapipe.com  

VIEW FULL SCREEN PDF MANUAL

General	Details
Name	EVERBILT Electric Upper Thermostat Instructions
Make	Everbilt
Language	English
Filetype	PDF (Download)
File size	0.11 MB

Download PDF

(1 votes, average: 5.00 out of 5)

Loading...

• ALL THERMOSTAT INSTRUCTIONS & USER MANUALS
• Everbilt

EVERBILT Electric Upper Thermostat Instructions Overview

Summary of Contents

• Page 1: Electric upper thermostat installation Before servicing the water heater, disconnect/turn off the main power breaker feeding the water heater. Turn power off at the breaker or fuse panel. Failure to do so may result in severe injury. Before servicing the water heater thermostat, verify with a volt meter that voltage/power has been disconnected. For replacement, be sure you have selected the same identical thermostat type as on the water heater. Disconnect the thermostat leads, preferably tag the leads before removal from the screw terminals. Remove and replace the thermostat from the thermostat bracket. Re-wire per diagram in the Use and Care booklet. Double check to be sure your wire connections are correct and they are firm and tight. Re-establish the electric power to the water heater. Replace the protective cover to the thermostat. Cycle test the water heater to be certain of proper operation.