Home > Everbilt > EVERBILT Electric Upper Thermostat Instructions

EVERBILT Electric Upper Thermostat Instructions

ELECTRIC UPPER THERMOSTAT INSTALLATION  
1. Before servicing the water heater, DISCONNECT/TURN OFF the main power  
breaker feeding the water heater.  
CAUTION: Turn power off at the breaker or fuse panel. Failure  
to do so may result in severe injury.  
2. Before servicing the water heater thermostat, verify with a volt meter that  
voltage/power has been disconnected to the water heater.  
3. For replacement, be sure you have selected the same IDENTICAL thermostat  
type as on the water heater.  
PLEASE NOTE – Upper thermostats are usually not the same as the  
lower thermostat.  
4. Disconnect the thermostat leads, preferably tag the leads before removal from  
the screw terminals to eliminate incorrect wiring problems.  
5. Remove and replace the thermostat from the thermostat bracket. Re-wire per  
diagram in the Use and Care booklet that came with the water heater or your  
tagged leads.  
6. Double check to be sure your wire connections are correct and they are firm and  
tight.  
7. Re-establish the electric power to the water heater.  
8. Replace the protective cover to the thermostat.  
9. Cycle test the water heater to be certain of proper operation.  
Distributed to The Home Depot  
By  
Valencia Pipe Company  
23805 Livingston Ave.  
Valencia, CA 91355  
(661) 257-3923  
GeneralDetails
NameEVERBILT Electric Upper Thermostat Instructions
MakeEverbilt
LanguageEnglish
FiletypePDF (Download)
File size0.11 MB
Download PDF
1 Star2 Stars3 Stars4 Stars5 Stars (1 votes, average: 5.00 out of 5)
Loading...

EVERBILT Electric Upper Thermostat Instructions