Danfoss DEVIreg 316 Electronic Thermostat Installation Guide

1

2

3

4

5

6

7

8

9

10

11

12

13

14

15

16

Installation Guide  

DEVIreg™ 316  

Electronic Thermostat  

www.DEVI.com  

VIEW FULL SCREEN PDF MANUAL

General	Details
Name	Danfoss DEVIreg 316 Electronic Thermostat Installation Guide
Make	Danfoss
Language	English
Filetype	PDF (Download)
File size	0.6 MB

Download PDF

(1 votes, average: 5.00 out of 5)

Loading...

• ALL THERMOSTAT INSTRUCTIONS & USER MANUALS
• Danfoss

Danfoss DEVIreg 316 Electronic Thermostat Installation Guide Overview

Summary of Contents

• Page 1: Installation guide for DEVIreg™ 316 electronic thermostat.
• Page 2: The English language is used for the original instructions. Other languages are a translation of the original instructions.
• Page 3: The thermostat has a button to adjust the temperature setting with a scale from -10°C to +50°C. An LED indicator shows standby periods and heating periods (red light). Technical specifications include operation voltage of 220 - 240V~, 50Hz and maximum power consumption of 0.25W. The relay supports a maximum of 16A / 3680W @ 230V. Sensing units are NTC 15 kOhm at 25 °C with specific sensing values for different temperatures. Hysteresis ranges from 0 ° to 6 °C. The ambient temperature range is from -10 °C to +50 °C. Cable specification is a maximum of 1 x 4 mm² or 2 x 2.5 mm². The minimum temperature range is -10 °C to +5 °C. Ball pressure temperature is rated at 75 °C.
• Page 4: DEVIreg™ 316 Pollution degree: 2 (domestic use) Storage temperature: -20 °C to +65 °C Protection class: Class II Dimensions: 86 x 36 x 58 mm Weight: 180 g The product complies with the EN/IEC Standard “Automatic electrical controls for household and similar use.” Safety instructions: Make sure the mains supply to the thermostat is turned off before installation. IMPORTANT: When the thermostat is used to control a floor heating element in connection with a wooden floor or similar material, always use a floor sensor and never set the maximum floor temperature to more than 35°C. Installation of the thermostat must be done by an authorized and qualified installer according to local regulations.
• Page 5: The thermostat must be connected to a power supply via an all-pole disconnection switch. Always connect the thermostat to continuous power supply. Do not expose the thermostat to moisture, water, dust, and excessive heat. Install the thermostat in an electric cabinet with DIN rail attachment or a separate DIN attachment according to local regulation on IP classes. Do not place the thermostat in a way that it will be exposed to direct sunlight. Click the thermostat on to the DIN rail attachment. Connect the thermostat according to the connection diagram.
• Page 6: DEVIreg™ 316 The screen of the heating cable must be connected to the earth conductor of the power supply cable by using a separate connector. When you use the wire sensor for floor heating, always install the sensor in a conduit. The thermostat is designed so that the sensor circuit is galvanically separated from the high voltage part. The sensor part is regarded as a low voltage part. Night set-back Minimum temperature limiter Hysteresis When the thermostat is used to apply with either heating systems or refrigerating systems, and the requested.
• Page 7: DEVIreg™ 316 Temperature is between -10°C to +50°C. It is recommendable to adjust the hysteresis according to the requested regulating range. If the temperature is set at 18°C and the hysteresis at 3°C, the thermostat will switch on at 18°C and off at 21°C. For controlling room temperature, the hysteresis is recommended to the set point of 1°C. Minimum temperature limiter is recommended when the thermostat is used with snow and ice melting systems. The requested maximum temperature range has to be between -10°C to +50°C. The requested minimum temperature range has to be between -10°C to +5°C. A link between terminal 9+10 must be connected to activate the use of the minimum temperature feature. This feature is important for controlling snow and ice melting in gutters, valley gutters, and down pipes. It helps avoid unnecessary energy waste, especially in extremely cold weather.
• Page 8: DEVIreg™ 316 When the temperature drops below the minimum temperature set value, the thermostat stops heating and the LED indicator turns yellow. When the temperature exceeds the maximum temperature setting, the thermostat stops heating and both the indicator for minimum and maximum temperature disappears. Temperature set-back By connecting an external timer to terminals 4 and 6, the thermostat can be set to reduce the temperature by 0°C to 8°C. Installation guide
• Page 9: Warranty A 2-year product warranty is valid for thermostats: DEVIreg™ 316. Danfoss offers a warranty valid from the date of purchase under specific conditions. During the warranty period, Danfoss will offer a new comparable product or repair the product if found faulty due to defective design, materials, or workmanship. The decision to repair or replace is solely at the discretion of Danfoss. Danfoss is not liable for consequential or incidental damages. The warranty is valid only if the WARRANTY CERTIFICATE is completed correctly and proof of purchase is provided. The WARRANTY CERTIFICATE must be filled in, stamped, and signed by the authorized installer. The warranty does not cover damage caused by incorrect use or installation by non-authorized electricians. All work will be invoiced if Danfoss inspects or repairs faults due to incorrect conditions. The warranty explicitly excludes all claims exceeding the stated conditions.
• Page 10: Warranty certificate The DEVI warranty is granted to: Purchase date Serial number of the product Product Art. No. Connected output [W] Installation date Connection date
• Page 11: DEVIreg™ 316 Installation guide
• Page 12: Disposal instruction Installation guide
• Page 13: DEVIreg™ 316 Installation guide
• Page 14: Page 14
• Page 15: Electronic thermostat Product documentation Designed in Denmark for Danfoss A/S Operating voltage: 220-240V~ Frequency: 50-60Hz Temperature range: -10°C to +50°C Current rating: 16A/3680W@230V~