Aprilaire 8570 Premium Programmable Thermostat Instruction Manual
WIRE REQUIREMENTS
(1) SELECT A MOUNTING LOCATION
Figure 1 and the table show the number of wires that must be available at the thermostat in stand-alone thermostat systems (i.e. not as part
of an Aprilaire® Model 6504 Intelligent Zoned Comfort System). Figure 1 shows optional connections to both an outdoor temperature sensor
and an Aprilaire® Automatic Humidifier Control (AHC), but only one or the other can be used. All wire is standard 18-24 gauge thermostat cable.
If installing the thermostat alone…
If installing an indoor temperature sensor…
• Mount on an interior wall, in a frequently occupied space.
• Keep the thermostat 18" from an outside wall.
• Mount the thermostat where it can be readily accessed.
Note that the backlighting illuminates whenever a button
is pressed.
• Mount the thermostat approximately 5 feet above the floor.
Height requirements are different for compliance with the
Americans with Disabilities Act (ADA) – 48" maximum height
for forward reach and 54" maximum height for side reach.
Application
# Wires
Diagram (Page)
1 (9)
Figure 1 – Thermostat Wire
• Thermostat can be mounted on a vertical junction box (j-box).
Single-Stage Furnace/AC
Two-Stage Furnace/AC
Two-Stage Roof Top Unit
Boiler w/AC (2-transformer)
5
7
7
6
6
• DO NOT mount the thermostat where the operating range
temperatures will be exceeded (i.e. attic or unventilated
equipment room).
OPTIONAL –
AUTOMATIC
HUMIDIFIER
CONTROL
(AHC)
2 (10)
HVAC
EQUIPMENT
3 (11)
• Thermostat can be mounted to a vertical junction box (j-box).
• DO NOT mount the thermostat:
• Mount the sensor in the same location as if installing a
thermostat alone.
4 (12)
SEE
TABLE
– behind doors, in corners or other dead air spaces.
OPTIONAL –
INDOOR
TEMPERATURE
SENSOR
Radiant 1st Stage Heat,
Furnace 2nd Stage and AC
5 (13)
2-WIRES
OPTIONAL –
OUTDOOR
– in direct sunlight or near lamps, appliances or other
sources of heat.
TEMPERATURE
SENSOR
Single-Stage Heat Pump
6
7
6 (14)
7 (15)
– on an outside wall or wall exposed to an unconditioned
space (i.e. garage).
Single-Stage Heat Pump
w/Two Stages Aux. Heat
2-WIRES
2-WIRES
MODEL 8570
THERMOSTAT
– in the flow path of a supply register, in stairways or near
outside doors.
Two-Stage Heat Pump
8
8 (16)
– on a wall where concealed pipes or ductwork could
influence the sensor.
When this thermostat is connected to a Model 6504 as
shown in Figure 2, only one four-wire cable need be run
from the thermostat to the Model 6504. Use standard
18-24 gauge thermostat cable.
Figure 2 –
Model 6504
Wire
MODEL 8570
THERMOSTAT
4-WIRES
MODEL 6504
– near sources of electrical interference such as arcing
switch contacts.
- 2 -
- 3 -
| General | Details |
|---|---|
| Name | Aprilaire 8570 Premium Programmable Thermostat Instruction Manual |
| Make | Aprilaire |
| Language | English |
| Filetype | PDF (Download) |
| File size | 0.57 MB |
(1 votes, average: 5.00 out of 5)
Loading...
Aprilaire 8538 Digital Heat Cool Thermostat Owner’s Manual
AprilAire S86W MUPR WiFi Thermostat User Guide
Aprilaire S86N MU Multi Stage Universal Thermostat Instruction Manual
Aprilaire S86WMUPR Programmable Wi-Fi Multi Stage Universal Thermostat Installation Guide
Aprilaire S86N MUPR Multi Stage Universal Thermostat Owner’s Manual
Aprilaire S84N 1H1C Programmable Single Stage Universal Thermostat Owner’s Manual
HEATIT Z-Temp3 is a Battery Operated Thermostat Instruction Manual
BEOK TGP53 Wifi Thermostat User Guide
COPELAND ST55 Sensi Smart Thermostat Instruction Manual
GENERAL ARUNA 300S RF Digital Room Thermostat User Manual
GENERAL LIFE Mitra 260S RF Wireless Room Thermostat User Manual
Fantini cosmi C820RQ Dual Power Room Thermostat Instruction Manual
AJAX ETHT82 White Touch Screen Thermostat Instruction Manual
Honeywell T9 Smart Thermostat Installation Guide
Aprilaire S86N MU Multi Stage Universal Thermostat Instruction Manual
ICP Control Ion Gray Smart Thermostat Owner’s Manual