Home > Ferono > Ferono FTH-30 Universal Thermostat Instruction Manual

Ferono FTH-30 Universal Thermostat Instruction Manual

4

Installation manual

1. Product Summary:

4. Installation Explanation:

FTH-30 series of thermostats are mainly used to control the 2-pipe

&3-speed fan coil and valve in the civil, commercial and industrial

constructions.

4.1 Please do the operations of installation by professionals after the

power is cut oﬀ.

4.2 Choose the correct installation location, do not install the product

under direct sunshine or near high humidity areas.

4.3 Working Environment Temperature: -10°C~+50.0°C.

4.4 When it need be installed in the high humidity places, such as the

bathroom, please use a special waterproof cover.

Digital Thermostat

2. Technical Parameter:

2.1 Power Supply: AC220V±10%, 50Hz.

2.2 Temperature Controlling Range: 5~35°C.

2.3 Standard Load: <3A (Resistive Load).

4.5 Height above sea level: 2000m at most

FTH-30

2.4 Power Consumption: <3W.

2.5 Sensing Element: NTC .

5. Installation Step:

2.6 Temperature Controlling Precision: 0/-2°C.

2.7 Transportation&Storage Environment: Temperature:-10~+55°C.

Relative Humidity: RH<85%(no condensation).

2.8 Working Environment Temperature:0~+50°C.

2.9 External Material: PC Engineering Plastic, Fire-resistant.

2.10 Dimension: 86×86×40.5 (mm).

5.1 Detach the panel and base according to the diagram, then loose the

wire base of power panel and take down the wire.

5.2 Firmly connect the power wire and load wire with the correspondent

terminals according to the wiring diagram on this manual.

5.3 Fix the base into the pre-buried standard 86 junction box by the

screws in the supplied accessories.

2.11 Installation: Standard 86 Junction Box (Standard EU Junction Box).

5.4 Insert the wire into the power panel, and attach the front cover to the

base according to the marked direction.

3. Main Function:

6. Installation Diagram:

3.1 Large screen of LCD, English display, with blue backlight.

3.2 Display the room temperature, clock and week simultaneously

3.3 With week programmable function, 4 time periods per day for the

setting of temperature and starting time

Standard 86 junction box

3.4 24-hours timer switch(optional).

3.5 8-hours of sleep function (optional).

3.6 Fan controlled anti-condensation, anti-cold air function.

3.7 With temperature correction function.

Installation Manual

Wire

Base

3.8 Backup function, can recover the foregoing working state before

power oﬀ.

Front Cover

40.5

3.9 With key lock function, can prevent the mis-operation.

3.10 Hotel special card (optional), no card into the economic operation

mode.

Installation diagram of back cover

External Dimension

- 1 -

- 2 -

Installation manual

Under power on state, short(long)press ▲ key or ▼ key change the

set temperature.

Notice: Card type thermostat only have card status change set

temperature.

Sleep mode at a constant temperature, ventilation mode is invalid;

after into sleep mode clients can change set temperature, but the

temperature do not be saved, after ﬁnish sleep mode return to

normal mode of set temperature.

7. Product Summary:

8. Product Summary:

ON-OFF Operation

Under standby state, long press key over 3 seconds to turn on the

system; under power-on state, long-press key over 3 seconds to turn

oﬀ the system.

▲Set Timer On/Oﬀ (Timing thermostat)

Under standby state, press

key enter timer on set interface,

press ▲key or press ▼key to change the set time, and the adjustive

step is half of one hour (30 minutes),

after ﬁnish press key

conﬁrm.

Sleeping mode

display interface

Keylock interface

under standby state

Default Value

Recovery Interface

Under power on state, long press

key enter timer oﬀ set

interface, press ▲key or press ▼key to change the set time, and

the adjustive step is half of one hour (30 minutes), after ﬁnish press

key conﬁrm.

Lock (Unlock) Keyboard

Under the standby or power on state, press ▲ and ▼ keys at the

same time over 3 seconds, loose them when displaying symbol and

then keyboard is locked; you can unlock the keyboard by doing the

same operations.

Standby state interface

Power-on state interface

Timing when the time is up, after automatic startup will operate by the

last time startup working mode and set temperature.

10 11

If you want to cancel the timer switch, please timed time settings for

zero; after artiﬁcial startup will automatically cancel the current boot

settings and after artiﬁcial shutdown will cancel timer shut oﬀ setting.

▲Recover the default value

System Running Operation

Under the power on state, press

, ▲and▼ at the same time

Under power on state, short press key to circularly switch the

system running mode:

over 3 seconds, then loose them when the default value recovery

interface is displayed. And the interface will show the software

version of thermostat, as the version 2.1 shown on the picture;

Press

key to conﬁrm, the display interface will restore to the

With week programmable function thermostat under power on state,

standby interface 5 seconds later, which means the operation is

successful; if you only want to check the version, press

return the power on state.

1. Power Restored

9. Water Valve Symbol

10. No card Mark

11. Timer On

long press

key to switch between auto (time period) running

key to

2. Time Period Display

3. Set Temperature

System Clock

mode and manual temperature setting running mode.

Without week programmable function thermostat under power on

12. Timer Oﬀ

Timing on set and

display interface

Timing oﬀ set interface

▲Setting System Parameters

state, long press

key enter timer oﬀ set condition.

4. Weekday Display

5. Mode/Conﬁrmation Key

6. Increasing Key

13. Sleep Mode

14. Room Temperature

15. Key Lock.

Under power on state, short press

fan speed:

key to circularly switch the

▲Enter Sleep Mode

Under power on state, long press

7. Decreasing Key

8. On/Oﬀ/Fan-speed Key

16. Fan Speed

17. Working Mode

key and

key at the same

time, after display sleep mode mark release the key will enter sleep

mode operation, the same operation can cancel the sleep mode.

Program State Interface

Temperature Correction

State Interface

- 3 -

- 4 -

- 5 -

- 6 -

VIEW FULL SCREEN PDF MANUAL

General	Details
Name	Ferono FTH-30 Universal Thermostat Instruction Manual
Make	Ferono
Language	English
Filetype	PDF (Download)
File size	0.99 MB

Download PDF

(1 votes, average: 5.00 out of 5)

Comments are closed.

Ferono Instructions & User Manuals

Get the free PDF manual for the Ferono FTH-30 Universal Thermostat Instruction Manual and access setup steps, usage instructions, and troubleshooting tips. 👉 View online or download now to keep your thermostat running smoothly!

Ferono FTH-30 Universal Thermostat Instruction Manual Overview

Summary of Contents

Page 1: Product summary: FTH-30 series of thermostats are mainly used to control the 2-pipe & 3-speed fan coil and valve in civil, commercial, and industrial constructions. Installation explanation: Operations should be performed by professionals after the power is cut off. Choose the correct installation location, avoiding direct sunlight or high humidity areas. Working environment temperature: -10°C to +50°C. When installed in high humidity places, use a special waterproof cover. Technical parameters include power supply of AC220V±10%, 50Hz, and a temperature controlling range of 5 to 35°C. Installation steps involve detaching the panel, connecting wires, and fixing the base into a standard junction box. Main functions include a large LCD screen, room temperature display, and week programmable function. The thermostat features a backup function to recover the previous working state before power off. Key lock function prevents mis-operation.
Page 2: Installation manual Under power on state, press ▲ and ▼ at the same time. Week programmable thermostat system default value in the period of constant, heating and cooling. Insert card thermostat menu function and explanation. System function explanation: valve control. Hot water valve on. Enter setting state, programmable menu F (blinking display) is under selected. Short press ▲ key (or short press ▼ key) switch menu options F0-F6. No card heating set temperature corresponding menu. The thermostat should be installed correctly by professionals according to the manual. Please check again if the N-wire and L-wire are connected correctly.
Page 3: Instrukcja obsługi i instalacji Opis produktu: Termostaty serii FTH-30 są używane głównie do kontroli 2-rurowych i 4-rurowych wentylatorów. Instrukcja instalacji powinna być dokonana przez osobę o odpowiednich kwalifikacjach po uprzednim odłączeniu zasilania. Należy wybrać odpowiednie miejsce instalacji, unikając przestrzeni o wysokiej wilgotności. Temperatura środowiska pracy wynosi -10°C do +50.0°C. Jeżeli konieczna jest instalacja w miejscach o wysokiej wilgotności, należy użyć specjalnej osłony wodoodpornej. Zasilanie: AC220V±10%, 50Hz. Zakres sterowania temperatury wynosi 5~35°C. Obciążenie znamionowe: <3A (rezystancyjne). Duży ekran LCD z angielskim wyświetlaczem i niebieskim podświetleniem. Obsługa programowania tygodniowego z oddzielnym ustawieniem temperatury i czasu uruchomienia.
Page 4: Instrukcja obsługi i instalacji Naciśnij i przytrzymaj jednocześnie przyciski przez 3 sekundy. Domyślne wartości dla menu tygodniowego programowania termostatu. Objaśnienie funkcji menu. Wejdź w tryb ustawień, programowalne menu F zostanie wybrane a wyświetlacz zacznie migać. Przytrzymaj krótko przycisk ▲ lub ▼ aby przełączać się między opcjami menu F0-F6. Ustawienia godziny, minut oraz temperatury. Funkcja automatycznego przywracania dostępna przy pojawieniu się zasilania. Termostat musi być zainstalowany poprawnie, przez osoby uprawnione, zgodnie z instrukcją obsługi. Należy sprawdzić poprawność parametrów sieci zasilającej przed instalacją termostatu. Dokładnie przeczytaj instrukcję przed korzystaniem z urządzenia.