Ferono FTH-30 Universal Thermostat Instruction Manual
Installation manual
Installation manual
Installation manual
Installation manual
Under power on state, press
seconds;
and
▼
at the same time
3
Week Programmable Thermostat System Default Value in the Period of
Constant, Heating and Cooling
Insert Card Thermostat Menu Function and Explanation
9. System Function Explanation:
Valve Control
Hot Water Valve On
● Enter setting state, programmable menu F(blinking display) is
under selected;
● Short press ▲ key(or short press ▼ key) switch menu options
F0-F6;
Menu Funcꢀon
Set range
Week
Explanaꢀon
Cold Water Valve On
Cooling
Temperature Set (°C)
Starꢀng
Time
1
7
~
Aſter adjusꢀng the min. parameter, press
key to confirm, the internal second
count will be cleared at the same ꢀme,
which can realize the precise ꢀme set.
Period
System Time
Adjustment
Monday - Friday
Saturday, Sunday
F0
Hour
0
23
59
~
~
Constant
Heaꢀng
20
Cooling
24
Constant
Heaꢀng
20
Cooling
24
Minute
0
● Short press
key enter the parameter settings state of
P1: 6:00 8:00
~
6:00
8:00
20
22
20
24
20
22
20
24
No card heaꢀng set
temperature
corresponding menu;
● Press ▲ key(or press ▼ key)change parameter value;
F1
F2
F3
5°C 22°C (Default 18°C)
~
P2: 8:00 16:00
~
18
26
18
26
Under no card status system will adjust the
set temperature into the corresponding
24°C 35°C (Default 26°C) economic operaꢀon temperature, to
P3: 16:00 22:00
~
16:00
22:00
20
24
20
24
No card cooling set
temperature
● Short press
confirm this setting, return to the previous menu
~
P4: 22:00 next 6:00
~
18
26
18
26
achieve no card energy-saving operaꢀon.
or select the next parameter;
No card thermostat set
temperature
Hot Water Valve Off
Cold Water Valve Off
Heating
20°C 26°C (Default 22°C)
~
● Short press
key cancel this setting, and return to the previous
T: Room Temperature
S: Set Temperature
Es: Converted Deviation (Default 3°C)
menu.
Timing Thermostat Menu Function and Explanation
0
Fan out of control
F4
Fan under control set
Power-on recovery set
Functional Diagram of Heating, Cooling and Constant Mode
Fan Control
1 (Default Value)
0 (Default Value)
1
Fan under control
Menu Funcꢀon
Set range
Week
Explanaꢀon
Week Programmable Thermostats Menu Function and Explanation
Power-on recovery funcꢀon is forbidden
Power-on recovery funcꢀon is available
F5
1
7
~
Aſter adjusꢀng the min. parameter, press
key to confirm, the internal second
count will be cleared at the same ꢀme,
which can realize the precise ꢀme set.
Menu Funcꢀon
Range
Week
Hour
Explanaꢀon
System Time
Adjustment
Keep high/mid/low fan speed
Keep high/mid/low fan speed
F0
F1
Hour
0
23
59
~
~
Manual
Manual
Adjust room
temperature
The room temperature will be increased
or reduced by 0.5°C
Aſter adjusꢀng the Minute parameter,
press
internal second count will be leared at
the same ꢀme, which can realize the
precise ꢀme set.
F6
-5°C +5°C
~
1
7
~
Minute
0
key to confirm and the
High Speed
High Speed
Mid Speed
System Time
Adjustment
Auto
Auto
0
23
59
F0
F1
~
~
0
Fan out of control
Mid Speed
Fan under control set
Power-on recovery set
Minute
0
Low Speed
Low Speed
1 (Default)
Fan under control
Insert Card Function Explanation
Starꢀng Hour
0
0
23
59
~
~
0 (Default Value)
Power-on recovery funcꢀon is forbidden
Power-on recovery funcꢀon is available
If the clients select the insert card type thermostat, please properly
connected to the card in accordance with wiring diagram in the
product bed. No card mark is displayed on the LCD panel when
no card, the system into the economic operation mode, the set
temperature pre-programmed by the staff.
Set the data of 4 ꢀme
periods (P1 P4) from
F2
F3
Starꢀng Minute
~
the 1st day to 5th day
1
The starꢀng ꢀmes of
4
ꢀme periods
Seꢁng
Temperature
5
35 (P1~P4) are without sequence, one ꢀme
period will be thrown away if you set the
same starꢀng ꢀme, that is, the next ꢀme
period will screen the previous one out.
~
Adjust room
temperature
The room temperature will be increased
or reduced by 0.55°C
T: Room Temperature
S: Set Temperature
Es: Converted Deviation (Default 3°C)
-5°C +5°C
~
Set the ꢀme periods of
the 6th day
F2
F3
The same as F1
The same as F1
Fan Speed Switch Diagram of Heating/Cooling Mode
Sleep Mode
Set the ꢀme periods of
the 7th day
A
card into the normal operating mode, the user can set the
temperature and wind speed. Economic model without card, the
user can switch, but can not change the set temperature, can not set
system parameters and recovery system.
0
Fan out of control
F4
Fan under Control or not
1 (Default)
0 (Default)
1
Fan under Control
Power-on recovery funcꢀon is forbidden
Power-on recovery funcꢀon is available.
Power-on Recover
Funcꢀon
F5
Refrigeration status of
Heating status of sleep
mode temperature curve
sleep mode temperature curve
Room Temperature
Correcꢀon
Increase or decrease the room
temperature by 0.5°C
F6
-5°C +5°C
~
- 7 -
- 8 -
- 9 -
- 10 -
Installation manual
Installation manual
Installation manual
Installation manual
11.3 The thermostat should be installed correctly by the professionals
according to the manual;
10. The solution of abnormal problems:
Note
Note
Please check again if the N-wire and L-wire are connected correctly;
if the cooling and heating running mode set is in accordance with the
requirements.
11.4 Please don’t install the thermostat near the high temperature heat
source or in bad environment;
11.5 Please make sure the power is the same as the voltage marked on
the controller before installation;
Funcꢀon
Range
Explanaꢀon
Long press
11.6 The functions and specification of thermostat will be updated
gradually without further notice;
Display”off” when the
power is on.
Did not switch on the ON/OFF key
Key
Terminal
L-wire,Terminal
N-wire
1
is not connected with
is not connected with
Make sure the power of terminal 1
and 7 is correct.
7
There is no display
when power on
The connecꢀon of LCD Main Board and
drive power are loose.
Check the wires.
The actual fan speed
does not comply with the The connecꢀng sequence of terminal 2, Check the external lines.
display.
3 and 4 is wrong
The wires are not connected
well or loose.
Check the wires
Normal display, but
wrong control
The wire connecꢀon is wrong
Temperature has not been adjusted.
NTC (Sensor)
Check the external lines.
Adjust the measured temperature
again
Room
temperature
(Measured temperature)
deviaꢀon
Check the sensor
Improve the installaꢀon
environment.
The installaꢀon locaꢀon is unsuitable
Display trouble code Err1 Internal sensor goes wrong.
Exchange the internal sensor
Warning:
11. Notice
11.1 Please read the manual carefully before using, if you have any
questions, please contact with the professional engineer of our
company;
The symbol means the unit is being installed, it may cause electrical
shock hazard during maintaining, so please make sure it is operated
by the professional technical worker.
11.2 This thermostat must have individual electrical power control
equipment. If you will not use it for a long time(over one month),
please cut off the electrical power;
- 11 -
- 12 -
- 13 -
- 14 -
| General | Details |
|---|---|
| Name | Ferono FTH-30 Universal Thermostat Instruction Manual |
| Make | Ferono |
| Language | English |
| Filetype | PDF (Download) |
| File size | 0.99 MB |
(1 votes, average: 5.00 out of 5)
Loading...
Honeywell Home X8S Smart Thermostat User Guide
ELKO EKO50107, EKO50108 Matter Thermostat Installation Guide
tado Smart AC Control V3+ Thermostat Instruction Manual
telkonet Aida Wireless Thermostat User Guide
Honeywell RCHT8610WF T5 Plus Smart Thermostat Installation Guide
NT NetX X5 IP Ethernet Thermostat Instruction Manual
GV S603R-3A Programmable Digital White Thermostat User Manual
Braemar BRA639659 Manual Digital Thermostat Instruction Manual
WHITE-RODGERS 1F75H-21PR Programmable Thermostat Owner’s Manual
ENGO CONTROLS EFAN-230W Fan Coil Thermostat User Guide