Ferono FTH-30 Universal Thermostat Instruction Manual
Installation manual
Installation manual
1. Product Summary:
4. Installation Explanation:
FTH-30 series of thermostats are mainly used to control the 2-pipe
&3-speed fan coil and valve in the civil, commercial and industrial
constructions.
4.1 Please do the operations of installation by professionals after the
power is cut off.
4.2 Choose the correct installation location, do not install the product
under direct sunshine or near high humidity areas.
4.3 Working Environment Temperature: -10°C~+50.0°C.
4.4 When it need be installed in the high humidity places, such as the
bathroom, please use a special waterproof cover.
Digital Thermostat
2. Technical Parameter:
2.1 Power Supply: AC220V±10%, 50Hz.
2.2 Temperature Controlling Range: 5~35°C.
2.3 Standard Load: <3A (Resistive Load).
4.5 Height above sea level: 2000m at most
FTH-30
2.4 Power Consumption: <3W.
2.5 Sensing Element: NTC .
5. Installation Step:
2.6 Temperature Controlling Precision: 0/-2°C.
2.7 Transportation&Storage Environment: Temperature:-10~+55°C.
Relative Humidity: RH<85%(no condensation).
2.8 Working Environment Temperature:0~+50°C.
2.9 External Material: PC Engineering Plastic, Fire-resistant.
2.10 Dimension: 86×86×40.5 (mm).
5.1 Detach the panel and base according to the diagram, then loose the
wire base of power panel and take down the wire.
5.2 Firmly connect the power wire and load wire with the correspondent
terminals according to the wiring diagram on this manual.
5.3 Fix the base into the pre-buried standard 86 junction box by the
screws in the supplied accessories.
2.11 Installation: Standard 86 Junction Box (Standard EU Junction Box).
5.4 Insert the wire into the power panel, and attach the front cover to the
base according to the marked direction.
3. Main Function:
6. Installation Diagram:
3.1 Large screen of LCD, English display, with blue backlight.
3.2 Display the room temperature, clock and week simultaneously
3.3 With week programmable function, 4 time periods per day for the
setting of temperature and starting time
Standard 86 junction box
3.4 24-hours timer switch(optional).
3.5 8-hours of sleep function (optional).
3.6 Fan controlled anti-condensation, anti-cold air function.
3.7 With temperature correction function.
Installation Manual
Wire
Base
3.8 Backup function, can recover the foregoing working state before
power off.
Front Cover
40.5
3.9 With key lock function, can prevent the mis-operation.
3.10 Hotel special card (optional), no card into the economic operation
mode.
Installation diagram of back cover
External Dimension
- 1 -
- 2 -
Installation manual
Installation manual
Installation manual
Installation manual
Under power on state, short(long)press ▲ key or ▼ key change the
set temperature.
Notice: Card type thermostat only have card status change set
temperature.
Sleep mode at a constant temperature, ventilation mode is invalid;
after into sleep mode clients can change set temperature, but the
temperature do not be saved, after finish sleep mode return to
normal mode of set temperature.
7. Product Summary:
8. Product Summary:
ON-OFF Operation
Under standby state, long press key over 3 seconds to turn on the
system; under power-on state, long-press key over 3 seconds to turn
off the system.
17
16
▲Set Timer On/Off (Timing thermostat)
Under standby state, press
key enter timer on set interface,
press ▲key or press ▼key to change the set time, and the adjustive
step is half of one hour (30 minutes),
after finish press key
1
2
3
15
confirm.
Sleeping mode
display interface
Keylock interface
under standby state
Default Value
Recovery Interface
Under power on state, long press
key enter timer off set
14
13
interface, press ▲key or press ▼key to change the set time, and
the adjustive step is half of one hour (30 minutes), after finish press
key confirm.
Lock (Unlock) Keyboard
Under the standby or power on state, press ▲ and ▼ keys at the
same time over 3 seconds, loose them when displaying symbol and
then keyboard is locked; you can unlock the keyboard by doing the
same operations.
4
Standby state interface
Power-on state interface
Timing when the time is up, after automatic startup will operate by the
last time startup working mode and set temperature.
12
9
10 11
If you want to cancel the timer switch, please timed time settings for
zero; after artificial startup will automatically cancel the current boot
settings and after artificial shutdown will cancel timer shut off setting.
▲Recover the default value
System Running Operation
OK
Under the power on state, press
, ▲and▼ at the same time
Under power on state, short press key to circularly switch the
system running mode:
over 3 seconds, then loose them when the default value recovery
interface is displayed. And the interface will show the software
version of thermostat, as the version 2.1 shown on the picture;
5
6
7
8
Press
key to confirm, the display interface will restore to the
With week programmable function thermostat under power on state,
standby interface 5 seconds later, which means the operation is
successful; if you only want to check the version, press
return the power on state.
1. Power Restored
9. Water Valve Symbol
10. No card Mark
11. Timer On
long press
key to switch between auto (time period) running
key to
2. Time Period Display
3. Set Temperature
System Clock
mode and manual temperature setting running mode.
Without week programmable function thermostat under power on
12. Timer Off
Timing on set and
display interface
Timing off set interface
▲Setting System Parameters
state, long press
key enter timer off set condition.
4. Weekday Display
5. Mode/Confirmation Key
6. Increasing Key
13. Sleep Mode
14. Room Temperature
15. Key Lock.
Under power on state, short press
fan speed:
key to circularly switch the
▲Enter Sleep Mode
Under power on state, long press
7. Decreasing Key
8. On/Off/Fan-speed Key
16. Fan Speed
17. Working Mode
key and
key at the same
time, after display sleep mode mark release the key will enter sleep
mode operation, the same operation can cancel the sleep mode.
Program State Interface
Temperature Correction
State Interface
- 3 -
- 4 -
- 5 -
- 6 -
| General | Details |
|---|---|
| Name | Ferono FTH-30 Universal Thermostat Instruction Manual |
| Make | Ferono |
| Language | English |
| Filetype | PDF (Download) |
| File size | 0.99 MB |
(1 votes, average: 5.00 out of 5)
Loading...
ENGO CONTROLS E10W230WIFI WiFi Temperature Thermostat User Guide
SIEMENS ET 134-22 Low Temperature Detection Thermostat Instructions
ENGO CONTROLS EONEBATW Internet Controlled Thermostat User Guide
VIVE COMFORT TP-N-721 Non Programmable Thermostat Instruction Manual
SALUS CONTROLS BTR230 Non Programmable Thermostat User Guide
heatmiser neoStat-Pro Smart Thermostat Instruction Manual
Danfoss TP7000 Series Electronic 7 Day Programmable Room Thermostat Instruction Manual
tado Smart Thermostat V3+ User Guide
expert4house BHT-8000 Heating Thermostat User Guide
Agatige MH1823 Intelligent Thermostat User Guide