Aprilaire 8570 Premium Programmable Thermostat Instruction Manual
2. Run a 2-wire cable from the sensor to the thermostat.
OUTDOOR TEMPERATURE (°F)
RESISTANCE (kΩ)
Figure 8
-30
-20
-10
0
230.6
163.8
117.6
85.4
62.6
46.3
34.6
26.1
19.9
15.3
11.9
9.4
CAUTION
Do not run the wire along side line
voltage (120 VAC) or higher lines as this can cause
erratic readings.
3. Take a resistance measurement before connecting to the
ODT and CIR GND terminals to verify the sensor is
properly installed. Measure the wires at the thermostat to
account for wire splices.
10
20
30
40
50
60
70
80
90
100
• Use an ohmmeter to measure the resistance (kΩ) of
the sensor. The resistance reading will depend on the
outdoor temperature (see table).
4. Wire the sensor to the thermostat (see Figure 8).
• Strip 1/4" of insulation from the two sensor wires.
• Connect the sensor wires to the ODT and CIR GND
terminals of the thermostat. The wiring is not polarity
sensitive, so either wire can be connected to either
thermostat terminal.
7.4
5.9
90-1025
- 20 -
- 21 -
| General | Details |
|---|---|
| Name | Aprilaire 8570 Premium Programmable Thermostat Instruction Manual |
| Make | Aprilaire |
| Language | English |
| Filetype | PDF (Download) |
| File size | 0.57 MB |

Aprilaire 8538 Digital Heat Cool Thermostat Owner’s Manual

AprilAire S86W MUPR WiFi Thermostat User Guide

Aprilaire S86N MU Multi Stage Universal Thermostat Instruction Manual

Aprilaire S86WMUPR Programmable Wi-Fi Multi Stage Universal Thermostat Installation Guide

Aprilaire S86N MUPR Multi Stage Universal Thermostat Owner’s Manual

Aprilaire S84N 1H1C Programmable Single Stage Universal Thermostat Owner’s Manual












