WATTS IOM-T-564 tekmar Invita WiFi Thermostat Instruction Manual
2. Mount Invita base to wall
4. Attach the thermostat
to back plate
Remove the back plate from the thermostat.
Align the 2 notches at the top of the base plate
with the holes on the top of the thermostat then
rotate on the hinge point down to close.
Secure the Invita thermostat back plate to a
2 x 4" electrical box with machine screws or to
drywall using wood screws with wall anchors.
5. Mounting the HVAC
Interface Module
Locate the HVAC Interface Module so that it can
connect to the other end of the existing wire from
the thermostat. After removing the cover, secure
the HVAC Interface Module to the wall, the HVAC
equipment chassis or HVAC plenum using the
holes at the top and bottom of the module.
Wiring to the module enters from opening on
the sides or the back. Refer to the diagrams on
pages 6 to 11 for wiring details.
If the wall has damage extending beyond the width
of the Invita WiFi Thermostat, place the wall plate
trim behind the back plate.
6. Replace the Cover
3. Wiring the Invita WiFi Thermostat
Push the HVAC
Interface Module
Cover towards the
base. Top and bottom
clips hold the cover
in place.
Connect the 2 wires from the old thermostat to the
terminals on the back of the Invita WiFi Thermostat.
This connection is not polarity sensitive.
5
| General | Details |
|---|---|
| Name | WATTS IOM-T-564 tekmar Invita WiFi Thermostat Instruction Manual |
| Make | WATTS |
| Language | English |
| Filetype | PDF (Download) |
| File size | 0.66 MB |

WATTS IOM-T-563 Tekmar WiFi Thermostat Installation Guide

WATTS BT-A03 RF Electronic Room Thermostat Installation Guide

WATTS TEK564 Invita WiFi Thermostat Instruction Manual

WATTS WTC-ES Contact Thermostat User Manual

WATTS 563 WiFi Thermostat User Manual

WATTS W561 WiFi Thermostat Instruction Manual

WATTS Tekmar Wi-Fi Thermostat Instruction Manual


















































