WATTS IOM-T-564 tekmar Invita WiFi Thermostat Instruction Manual
Installation
Preparation
Tools Required
• tekmar or jeweler screwdriver
• Phillips head screwdriver
• Wire stripper
• Drill (for wall anchor)
• 3⁄16" drill bit (for wall anchor)
Materials Required
• 18 AWG LVT Solid Wire (low voltage connections)
Ensure power to connecting equipment is off. To prevent the risk of personal
injury and/or death, make sure power is not applied to the thermostat or HVAC
Interface Module until they are fully installed and ready for configuration. All work
must be done with power to the circuit being worked on turned off.
NOTICE
Please be aware local codes may require this thermostat to be installed or connected by
an electrician.
NOTICE
Thermostat Location
Consider the following:
• Away from equipment, appliances, or other
sources of electrical interference.
• Interior wall. eep dry. Avoid potential leak-
age onto the control.
• Approximately 5 feet (1.5 m) off the finished
floor.
• No draft, direct sun, or other cause for inac-
curate temperature readings.
• The maximum length of wire is 500 feet (150 m).
1. Remove the old thermostat
If more than 2 wires are present, identify the R & C wires for use when connecting the Invita WiFi
Thermostat. Additional wires should be secured in a way that prevents them from touching the circuit
board or terminals on the Invita after the R & C wires are connected.
4
| General | Details |
|---|---|
| Name | WATTS IOM-T-564 tekmar Invita WiFi Thermostat Instruction Manual |
| Make | WATTS |
| Language | English |
| Filetype | PDF (Download) |
| File size | 0.66 MB |

WATTS IOM-T-563 Tekmar WiFi Thermostat Installation Guide

WATTS BT-A03 RF Electronic Room Thermostat Installation Guide

WATTS TEK564 Invita WiFi Thermostat Instruction Manual

WATTS WTC-ES Contact Thermostat User Manual

WATTS 563 WiFi Thermostat User Manual

WATTS W561 WiFi Thermostat Instruction Manual

WATTS Tekmar Wi-Fi Thermostat Instruction Manual

















































