WATTS IOM-T-563 Tekmar WiFi Thermostat Installation Guide
Installation
Preparation
• Wire stripper
• Drill (for wall anchor)
• 3/16" drill bit (for wall anchor)
Tools Required
• tekmar or jeweler screwdriver
• Phillips head screwdriver
Materials Required
• 18 AWG LVT Solid Wire (low voltage connections)
Installation Location
Consider the following:
• Interior wall.
• Keep dry. Avoid potential leakage onto the control.
• Relative humidity less than 90%. Non-condensing environment.
• No exposure to extreme temperatures beyond 32-122°F (0-50°C).
• No draft, direct sun, or other cause for inaccurate temperature readings.
• Away from equipment, appliances, or other sources of electrical interference.
• Easy access for wiring, viewing, and adjusting the display screen.
• Approximately 5 feet (1.5 m) off the finished floor.
• The maximum length of wire is 500 feet (150 m).
• Strip wire to 3/8" (10 mm) for all terminal connections.
• Use standard 8 conductor, 18 AWG wire.
Removing the Thermostat Base
While holding the base section in one hand, pull the
lower half of the display front towards you to pivot it
away from the base.
4
| General | Details |
|---|---|
| Name | WATTS IOM-T-563 Tekmar WiFi Thermostat Installation Guide |
| Make | WATTS |
| Language | English |
| Filetype | PDF (Download) |
| File size | 0.63 MB |

WATTS IOM-T-564 tekmar Invita WiFi Thermostat Instruction Manual

WATTS BT-A03 RF Electronic Room Thermostat Installation Guide

WATTS TEK564 Invita WiFi Thermostat Instruction Manual

WATTS WTC-ES Contact Thermostat User Manual

WATTS 563 WiFi Thermostat User Manual

WATTS W561 WiFi Thermostat Instruction Manual

WATTS Tekmar Wi-Fi Thermostat Instruction Manual













































