VIMAR 30810.x-02973 Smart Home View Wireless Connected Dial Thermostat Instruction Manual

1

2

3

SMART HOME VIEW WIRELESS  

30810.x - 02973 Connected dial thermostat  

THREE OPERATING MODES (ALTERNATIVE)  

Stand alone •  

•

A

B

Download the View Wireless  

will be using for configuration.  

App from the stores onto the tablet/smartphone you  

C

When the device is powered for the first configuration, we recommend you search for any  

new firmware and perform the update.  

Depending on the mode you select, you will need:  

1

2

Stand alone  

Gateway  

Smart Home Hub  

art. 30807.x-20597-19597-16497-14597  

View App  

Nothing else  

Samsung SmartThings  

• Short press = degrees Celsius/Fahrenheit selection  

for management via smartphone/tablet  

Hub  

• Long press (5 s) = the thermostat enters the configuration phase (bt)  

• Prolonged press (30 s) within the first 5 min of powering = device reset (rst)  

Amazon Alexa, Google Assistant, Siri (Homekit)  

voice assistants for possible voice operation  

Display brightness and RGB LED in standby setting  

• 1st press = current brightness display  

Create your Installer account on MyVimar (on-line).  

• Subsequent presses = cyclic display of available brightness values L-3 (high), L-2  

(medium), L-1 (low) and L-0 (off).  

STAND ALONE CONFIGURATION  

1. Wire all the thermostats.  

Display  

2. Start the View Wireless App and log in with the credentials you just created.  

3. Create the system and the environments.  

4. Associate all the thermostats with the environments.  

To associate the thermostat:  

• bt = devices in Bluetooth configuration  

• off = thermostat off; on = thermostat on  

• °C = degrees Celsius; °F = degrees Fahrenheit  

• L-0, L-1, L-2, L-3 = brightness in standby (from the lowest to the highest)  

• H = heating; C = air conditioning  

A

•

•

Select “Add” (  

), choose the environment to place it and give it a name  

Select  

; activate the Bluetooth connection on your tablet/smartphone and approach the  

for 5 s; the ring flashes blue and association is complete.  

• opn = open window (associated with the thermostat via magnetic contact art.  

03980)  

thermostat  

•

Press  

Dial  

5. For each thermostat, set the functions and parameters.  

B

C

6. Go to the “Temperature control” menu and for each thermostat set the time schedules, the  

setpoints for the operating modes and the current time.  

Lightable ring  

• Power on and off.  

CONFIGURATION IN  

Upon power on or off, the thermostat starts in the last operating mode associated  

with it set via the View* App or View Wireless* App.  

1. Wire all the devices in the system (2-way switches, relays, thermostats, gateway, etc.).  

2. Start the View Wireless App and log in with the credentials you just created.  

3. Create the system and the environments.  

• Heating or air conditioning mode selection.  

4. Associate all the devices with the environments, except for the gateway (which should be  

associated last).  

* Only for Bluetooth technology  

To associate the thermostat:  

• Select “Add” (  

• Select  

the thermostat  

• Press  

), choose the environment to place it and give it a name  

; activate the Bluetooth connection on your tablet/smartphone and approach  

Ring signalling  

All flashing blue = thermostat in configuration mode  

for 5 s; the ring flashes blue and association is complete.  

5. For every device, set the function, the parameters and any accessory devices (wired or radio  

control and related function).  

All lit amber* = thermostat in heating mode and relay active  

All lit blue** = thermostat in air conditioning mode and relay active  

• Lit amber * = thermostat in heating mode and relay not active  

6. Transfer the configuration of the devices to the gateway and connect it to the Wi-Fi network.  

7. Transfer the system to the Administrator user (who must have created his/her profile on  

MyVimar).  

• Lit blue ** = thermostat air conditioning mode and relay not active  

1

For full details, see the View Wireless App manual that can be downloaded from the www.  

vimar.com website.  

In standby, the brightness is set during configuration; otherwise, the value is the  

maximum one.  

CONFIGURATION IN  

• Flashing red = the thermostat, in automatic mode, has lost the hourly value and  

Follow the procedure above from points 1 to 2.  

has therefore switched to manual mode.  

2

Associate the device directly to a ZigBee Hub (e.g. Amazon Echo Plus, SmartThings Hub)  

1) Download the Zigbee software using the View Wireless App (see the View Wireless App  

When it receives the hourly value from the gateway again, the thermostat returns  

to automatic mode and the flashing ends.  

manual). Press the  

key on the device until the display shows “bt” and the ring blinks in  

blue. To update the software on the device, the procedure is the same.  

2) After conversion to Zigbee technology (or the software update), the device automatically goes  

into pairing mode for 5 minutes, during this period the Lightable ring blinks white. If the device  

is not in pairing mode, cut off the power supply and restore it after a few seconds.  

3) Associate the device according to the procedure envisaged by the ZigBee Hub.  

4) Associate the module according to the procedure envisaged by the ZigBee Hub (see the Hub’s  

manufacturer documentation).  

* Amber with automatic colour or of the selected colour.  

** Blue with automatic colour or of the selected colour.  

to indicate the “heating offset temperature” adjustment; by turning the Dial it is possible to set  

a temperature offset. The Lightable ring flashes amber and the offset appears on the display.  

- Press  

the display and the crown flashes cyan at maximum brightness and 2 minutes timer starts  

for setting the “Press ” key for 5 s to confirm the “cooling offset temperature”; by turning  

key for 5 s to confirm the “heating offset temperature”. The “C” now appears on  

Set the thermostat parameters.  

Within the first 10 minutes after the device has been powered (already associated with ZigBee  

Hub) or after restart at the conclusion of Zigbee association, press the key related to the  

parameter to be changed as stated below.  

the dial it is possible to set a temperature offset. The Lightable ring flashes cyan and the  

offset appears on the display.  

1. Set the winter/summer calibration  

- Press  

cyan flashes on the Lightable ring.  

Note: if you don’t want to save the chosen values, let the 2 min timeout expire.  

key for 5 s to confirm the “cooling offset temperature”, saving is confirmed by three  

- Press  

key for 5 s this starts the configuration for choosing the “heating offset temperature”  

within 2 minutes timeout. The Lightable ring will flash amber and “H” apperas on the display  

Viale Vicenza 14  

36063 Marostica VI - Italy  

www.vimar.com  

30810.x-02973 04 2311  

VIEW FULL SCREEN PDF MANUAL

General	Details
Name	VIMAR 30810.x-02973 Smart Home View Wireless Connected Dial Thermostat Instruction Manual
Make	VIMAR
Language	English
Filetype	PDF (Download)
File size	0.14 MB

Download PDF

(1 votes, average: 5.00 out of 5)

Loading...

• ALL THERMOSTAT INSTRUCTIONS & USER MANUALS
• VIMAR

VIMAR 30810.x-02973 Smart Home View Wireless Connected Dial Thermostat Instruction Manual Overview

Summary of Contents

• Page 1: Connected dial thermostat Three operating modes: stand alone, gateway, smart home hub. Download the View Wireless App for configuration. Search for firmware updates during the first configuration. Select the operating mode and set the necessary parameters. Stand alone configuration steps include wiring thermostats and creating environments. Associate thermostats with environments using Bluetooth. Configuration in ZigBee mode requires downloading Zigbee software and following pairing procedures. Set thermostat parameters, including heating and cooling offsets. Refer to the View Wireless App manual for detailed instructions.
• Page 2: Set the ring color by pressing the key for 5 seconds to start the configuration. The LED appears on the display to indicate the ring color choice. Press the key for 5 seconds to confirm the ring color, with confirmation indicated by three flashes. The device has a relay output with voltage-free contact rated at 5(2) A 240 V~. Temperature measurement precision is 0.5°C between +15°C and 30°C, and 0.8°C at extremes. Operating modes include Automatic, Manual, Reduction, Absence, Protection, Off, and Timed Manual. The device can be controlled via the View App, Alexa, Google, Siri, and Homekit voice assistants. Installation and configuration must be carried out by qualified persons in compliance with current regulations. The device must be installed at a height of 1.5 m above floor level for optimal temperature detection. In Zigbee technology mode, associate the device directly to a ZigBee Gateway.
• Page 3: WEEE - User information The crossed bin symbol indicates that the product must be collected separately at the end of its life. Users must hand the equipment over to appropriate municipal centres for differentiated collection of electrical and electronic waste. Equipment can also be delivered free of charge to the distributor when purchasing a new appliance of an equivalent type. Proper sorted waste collection helps to prevent negative impacts on the environment and human health. The front buttons, display, dial, and lighting can be used to set and display all operating modes of the thermostat. In automatic operating mode, the dial can be turned to switch to manual operation for a set period. The thermostat remains in manual operation or reduction mode with the setpoint determined by the dial. Vimar SpA declares that the radio equipment complies with Directive 2014/53/EU. The product may contain traces of lead as per REACH Regulation no. 1907/2006 – Art.33. Connections include circulation pumps, burners, solenoid valves, and temperature probes.