VEVOR ET-72G Programmable Thermostat Instruction Manual
[Reset] button. If the red light is off and the screen shows the shutdown
status, it is nuisance tripping. If not, it means that ground fault has occurred.
Please contact your dealer or professional technician immediately.
Functions and operation
On/Off
The GFCI Reset button is also the switch button. Press the [Reset] button
to switch on and off.
Temporary Override Temperature
This function is enabled in the automatic intelligent mode, when the
temperature demand changes at this moment, the setting temperature is
enabled, but the parameters in the Event are not changed.
Operation method:
Under the interface showing the real-time temperature, tap ▲ or ▼ to
modify the set temperature. Tap OK to confirm and return to the interface
showing the real-time temperature.
Mode selection
This thermostat provides three operating modes:
Automatic mode: According to the weekly program, the thermostat
automatically adjusts the set temperature operation.
Manual mode: The thermostat runs continuously according to the set
temperature.
Frost protection mode: The temperature controller runs at a lower set
temperature. The temperature range is set from 41°F to 59°F in this mode.
This mode is used when you want to keep your room at a lower
temperature when you are on vacation.
How to set the mode selection: In the interface displaying the real-time
temperature, tap OK to enter the first level menu, and Mode is flashing. Tap
OK to enter the mode selection. Tap ▲ or ▼ to change the mode. Tap OK
to confirm your selection. If you select manual mode or freeze protection
- 5 -
| General | Details |
|---|---|
| Name | VEVOR ET-72G Programmable Thermostat Instruction Manual |
| Make | VEVOR |
| Language | English |
| Filetype | PDF (Download) |
| File size | 0.19 MB |





























