Home > StelPro > stelpro STZW402 ELECTRONIC THERMOSTAT SMART HOME User Guide

stelpro STZW402 ELECTRONIC THERMOSTAT SMART HOME User Guide

NOTE 2: When in Off mode, the thermostat will not activate the heating element, therefore there  
is a risk of freezing.  
Heating mode  
The thermostat has two heating modes: Baseboard/convector heater and Fan-forced heater.  
The Baseboard/convector heater mode will drive the load with a 15-second cycle while the Fan-forced  
heater mode will drive the load with a 5-minute cycle.  
When the Fan-forced heater mode is selected, the fan icon  
is displayed on the thermostat.  
Z-Wave connectivity (  
)
If the thermostat is added (included) to a Z-Wave network, the connectivity icon will be displayed on the  
LCD, if the device is removed (excluded) from a Z-Wave network, the connectivity icon will disappear.  
The connectivity icon  
may blink if there is an issue with the Z-Wave radio circuit.  
Advanced settings (  
)
There are 7 advanced settings menus on the thermostat.  
The advanced settings are the following:  
1. Z-Wave menu : used to add (include) or remove (exclude) the thermostat from a Z-Wave  
network  
2. Display format: used to switch the temperature format between °C and °F  
3. Heating mode  
: used to switch the heating mode between Baseboard/convector and Fan-  
forced heaters  
4. Lock mode  
: used to lock the thermostat to prevent unauthorized tampering.  
5. Outdoor temperature display  
: used to switch the outdoor temperature display on or off  
(when available). When set to (On), the outdoor temperature will be displayed if it’s available.  
When set to (Off), the outdoor temperature will not be displayed and the setpoint will always  
be displayed.  
6. Backlight status  
while idle: used to set the backlight intensity when the thermostat is idle.  
0%: the backlight will turn off after 15 seconds of inactivity  
50%: the backlight will dim to 50% after 15 seconds of inactivity  
100%: the backlight will always be at full intensity  
9
040D05A_INSSTZW402+0622  
GeneralDetails
Namestelpro STZW402 ELECTRONIC THERMOSTAT SMART HOME User Guide
MakeStelPro
LanguageEnglish
FiletypePDF (Download)
File size0.41 MB
Download PDF
1 Star2 Stars3 Stars4 Stars5 Stars (1 votes, average: 5.00 out of 5)
Loading...
STELPRO STF362NP Floor Heating Thermostat Owner’s Manual
STELPRO STF362NP Floor Heating Thermostat Owner’s Manual
STELPRO ST302P Programmable Electronic Thermostat Owner’s Manual
STELPRO ST302P Programmable Electronic Thermostat Owner’s Manual
STELPRO SAT402ZB Smart Thermostat User Guide
STELPRO SAT402ZB Smart Thermostat User Guide
STELPRO ST252NPFF Non-Programmable Electronic Thermostat Owner’s Manual
STELPRO ST252NPFF Non-Programmable Electronic Thermostat Owner’s Manual
STELPRO ST402PFF Programmable Electronic Thermostat Owner’s Manual
STELPRO ST402PFF Programmable Electronic Thermostat Owner’s Manual
STELPRO ASMC402 Maestro Zigbee Smart Programmable Thermostat User Guide
STELPRO ASMC402 Maestro Zigbee Smart Programmable Thermostat User Guide
STELPRO SIBTE12C Electronic Thermostat Owner’s Manual
STELPRO SIBTE12C Electronic Thermostat Owner’s Manual
STELPRO STZW402+ Electronic Thermostat for The Smart Home Owner’s Manual
STELPRO STZW402+ Electronic Thermostat for The Smart Home Owner’s Manual
STELPRO SIBTE13F Electronic Thermostat User Guide
STELPRO SIBTE13F Electronic Thermostat User Guide
STELPRO STCP MULTIPLE PROGRAMMING ELECTRONIC THERMOSTAT User Guide
STELPRO STCP MULTIPLE PROGRAMMING ELECTRONIC THERMOSTAT User Guide

stelpro STZW402 ELECTRONIC THERMOSTAT SMART HOME User Guide