sinope Smart Low Voltage Thermostat TH1400WF Installation Guide

1

2

INSTALL YOUR THERMOSTAT  

Unlock and lift the  

thermostat cover.  

If necessary, mark and drill the  

1

3

Depending on the heating system,  

insert each wire into its terminal  

and screw firmly. (See connection  

layouts outlined in the following  

pages.)  

2

appropriate fastening holes, using the  

installation template. If needed, use  

the wall anchors included.  

TH1400WF  

Installation Guide  

Smart Low voltage Thermostat (24 Vac)  

4

Use the provided screws and  

wall anchors to fix the  

thermostat base on the wall.  

6

Power up the thermostat.  

5

Replace back and lock the  

thermostat cover.  

AUXILIARY OUTPUT  

WIRING LAYOUT  

The thermostat provides an auxiliary heating output that  

can act as a second stage of heating when controlling  

ambient temperature.  

Electric baseboard  

Hot water valve  

If the room temperature is too far from the setpoint or the  

main stage of heating has difficulties raising the  

temperature, the auxiliary output activates the secondary  

heating source to reach the set temperature.  

120 V  

240 V  

347 V  

24 V  

24 Vac  

Valve  

normally open  

C

Electric baseboard  

Both outputs can control different types of heating load and  

can be configured in the user settings.  

R

W1  

W2  

S1  

For use in floor or ambient  

mode with floor limit.  

Floor sensor  

S2  

Not required for ambient  

mode alone.  

Electric floor heating with electric  

baseboard on the 2nd heating stage  

Electric floor heating  

Floor sensor  

Electric baseboard  

CONNECTION OF THE FLOOR SENSOR  

(OPTIONAL)  

ADD YOUR THERMOSTAT TO NEVIWEB  

Only for control applications in floor (F) mode or with floor limit.  

1

If you do not have an account yet,  

Tap the  

then select "Add Device"  

2

download the Neviweb app for iOS or  

Android to open an account and add  

your device.  

TB024B  

Follow the steps of the  

Installation Wizard  

3

Sensor  

1

2

3

VIEW FULL SCREEN PDF MANUAL

General	Details
Name	sinope Smart Low Voltage Thermostat TH1400WF Installation Guide
Make	sinope
Language	English
Filetype	PDF (Download)
File size	0.37 MB

Download PDF

(1 votes, average: 5.00 out of 5)

Loading...

• ALL THERMOSTAT INSTRUCTIONS & USER MANUALS
• sinope

sinope Smart Low Voltage Thermostat TH1400WF Installation Guide Overview

Summary of Contents

• Page 1: Install your thermostat by unlocking and lifting the thermostat cover. Mark and drill the appropriate fastening holes using the installation template. Insert each wire into its terminal and screw firmly, following the connection layouts. Use the provided screws and wall anchors to fix the thermostat base on the wall. Power up the thermostat and replace back and lock the thermostat cover. The thermostat provides an auxiliary heating output that can act as a second stage of heating. The auxiliary output activates the secondary heating source if the room temperature is too far from the setpoint. Both outputs can control different types of heating load and can be configured in the user settings. Connection of the floor sensor is optional and only for control applications in floor mode or with floor limit. Download the Neviweb app for iOS or Android to open an account and add your device.
• Page 2: Parameters that can be controlled from the device include user settings and temperature control modes. The thermostat features two temperature control modes: A mode for ambient temperature regulation and F mode for floor temperature regulation. All settings can be adjusted through the Neviweb app, but certain changes require account creation. The maximum floor temperature limit ranges from 7 °C to 36 °C, with a default setting of OFF. The minimum floor temperature limit ranges from 5 °C to 36 °C, also with a default setting of OFF. Cycle length options for the main output include 15 sec, 5 min, 10 min, 15 min, 20 min, 25 min, and 30 min, with a default of 15 min. The thermostat includes a circulator pump's anti-seizure feature, which activates the main output for 1 minute every 24 hours when not heating. Technical specifications include an operating voltage of 24 Vac and a maximum load of 1 Amp. The device is compatible with various heating systems, including baseboard heaters and hydronic heating systems. A 3-year limited warranty covers defects in material and workmanship under normal use, with specific conditions outlined.