seitron 039790 WiFi WiTime Wall Programmable Thermostat User Guide
Collegare i cavi, facendoli passare tramite l’apertura
rettangolare, come indicato nell’esempio riportato per il
collegamento alla caldaia:
Connect the wires, passing them through the rectangular
opening, as shown on the example of the boiler wiring:
4
ATTENZIONE! / WARNING!
N.O.
N.C.
C
• Prima di effettuare i collegamenti accertarsi che la rete elettrica sia scollegata.
• L’installazione ed il collegamento elettrico del dispositivo devono essere eseguiti da
personale qualificato ed in conformità alle leggi vigenti.
A
B
S-
S+
L
C:
Comune Caldaia / Common to Boiler
N
NO: Normalmente Aperto Caldaia
• Before making any connections, make sure the mains power is disconnected.
• Device installation and electrical connections must be carried out by qualified personnel
and must comply with current normative standards.
Normally open to Boiler
L:
Linea (di solito marrone) / Live (Usually brown)
N:
Neutro (di solito blu) / Neutral (Usually blue)
INSTALLAZIONE / INSTALLATION
A B: Rete Modbus (Opzionale)
Rete Modbus (Optional)
Togliere la tensione elettrica.
Cut off mains power.
S- S+: Sonda temperatura ambiente remota (Opzionale)
1
Remote room temperature sensor (Optional)
Per le altre modalità di collegamento vedere il manuale istruzione completo
Nel caso di SOSTITUZIONE di un cronotermostato già presente, proseguire al Punto 2.
Se si tratta di una NUOVA installazione andare al Punto 3.
For more wiring options, see the complete instruction manual
If a programmable thermostat is already present and it needs to be REPLACED, go to Point 2.
If it is a NEW installation skip to Point 3.
5
Sganciare il vecchio cronotermostato dal muro e
2
scattare la foto del cablaggio: i cavi di alimentazione
fissare a muro il cronotermostato
l utilizzando le viti in dotazione.
solitamente sono blu e marrone, quelli di controllo
caldaia solitamente sono neri o grigi.
Una volta individuati i cavi, scollegarli e rimuovere il
vecchio cronotermostato.
fix the Wi-Time wall programmable
o the wall using the provided screws.
Unhook the old programmable thermostat from the
wall and take a picture of the wirings: the power wires
are usually blue and brown, the boiler control ones are
usually black or gray.
Once the wires are located, unplug them and remove
the old programmable thermostat.
3
Rimontare la mascherina inserendola prima sui
ganci presenti sulla parte alta della base (1) e
successivamente agganciandola sulle clip in
basso (2).
6
1
1
Place back the cover by first hooking it to the upper
side of the plastic base (1) and then locking it to the
lower side clips (2).
2
Sganciare e rimuovere la mascherina del Wi-
Time wall, dalla base sottostante, facendo
pressione sulle 2 clip presenti sulla parte
bassa del cronotermostato e alzando la
mascherina verso l’alto.
Dare tensione al cronotermostato.
Power up the programmable thermostat.
7
8
Unhook and remove the front cover of the Wi-
Time wall, from its plastic base underneath,
applying pressure on the 2 clips located on the
bottom side of the programmable thermostat
and lifting the cover towards the upper side.
Il display visualizza l’icona‘
‘ e la scritta ‘ PAIRING ‘ per circa 2 minuti.
The display shows the icon ‘
‘ and the text ‘ PAIRING ‘ for about 2 minutes.
| General | Details |
|---|---|
| Name | seitron 039790 WiFi WiTime Wall Programmable Thermostat User Guide |
| Make | seitron |
| Language | English |
| Filetype | PDF (Download) |
| File size | 0.24 MB |

seitron Wi-Time Wall Wi-Fi Programmable Thermostat Instruction Manual

seitron TAD022 Digital Room Thermostat for Heating Cooling System Instruction Manual

seitron TM 00-M Electro Mechanical Room Thermostat Instructions

seitron DR R02M Thermostat Wireless Kit Instruction Manual

seitron KTY003 Hygge Kit Class 5 WiFi Battery Powered Programmable Thermostat User Guide

seitron TR D02B Wireless Digital Thermostat User Manual
















