Home > SECURE > SECURE ThermoPlus PRT1 Programmable Room Thermostat Instruction Manual

SECURE ThermoPlus PRT1 Programmable Room Thermostat Instruction Manual

Electrical Connections  
All necessary electrical connections should now be made.  
Flush wiring can enter from the rear through the aperture in the  
Backplate. Surface wiring can only enter from beneath the  
ThermoPlus and must be securely clamped.  
The mains supply terminals are intended to be connected to the  
supply by means of fixed wiring.  
The ThermoPlus is mains powered and requires a 3Amp fused  
spur.The recommended cable sizes are 1.0mm2 or 1.5mm2.  
The ThermoPlus is double insulated and does not require an  
Earth connection, an Earth connection block is provided on the  
Backplate for terminating any cable Earth conductors.  
Earth continuity must be maintained and all bare Earth  
conductors must be sleeved. Ensure that no conductors are left  
protruding outside the central space enclosed by the Backplate.  
Commissioning the Thermostat  
Ensure all dust and debris has been cleared away from the work  
area before removing the ThermoPlus PRT1 from its  
packaging.  
5
Fittingthe Thermostat  
- If surface wiring has been used, remove  
the knockout/insert from the bottom of  
the thermostat to accommodate it.  
-
Loosen the two 'captive' retaining  
screws on the bottom of the Backplate.  
- Fit the thermostat to the Backplate,  
ensure the lugs on the  
End view of the  
thermoplus  
Backplate engage with the slots on the  
thermostat.  
- Swing the bottom of the thermostat into position ensuring that  
the connection pins on the back of the unit locate into the  
terminal slots in the backplate.  
- Tighten the two 'captive' retaining screws to fix the unit  
securely.  
Then switch ON the mains supply.  
Reset Procedure  
Please note; Using this procedure will restore the ThermoPlus  
to the original factory programme settings, the time setting will  
also default to1st January 2005.  
Resetting the ThermoPlus PRT1  
TIME  
PROG  
On the ThermoPlus PRT1 press the  
‘UP’ and  
together:  
DOWN’ arrow buttons  
- Then release the buttons and the  
thermostat will return to preset  
factory settings.  
TO RESET PRESS  
6
GeneralDetails
NameSECURE ThermoPlus PRT1 Programmable Room Thermostat Instruction Manual
MakeSECURE
LanguageEnglish
FiletypePDF (Download)
File size0.67 MB
Download PDF
1 Star2 Stars3 Stars4 Stars5 Stars (1 votes, average: 5.00 out of 5)
Loading...
SECURE ThermoPlus AS2 Programmable Room Thermostat Instruction Manual
SECURE ThermoPlus AS2 Programmable Room Thermostat Instruction Manual
SECURE radbot 1 Intelligent Radiator Thermostat Instruction Manual
SECURE radbot 1 Intelligent Radiator Thermostat Instruction Manual
SECURE H3747 Smart Programmable Thermostat Installation Guide
SECURE H3747 Smart Programmable Thermostat Installation Guide

SECURE ThermoPlus PRT1 Programmable Room Thermostat Instruction Manual