Home > Robertshaw > Robertshaw 9602 Programmable Thermostat User Manual

Robertshaw 9602 Programmable Thermostat User Manual

110-732E 7/18/01 3:05 PM Page 7  
Step 3: Testing the Thermostat  
WARNING: DO NOT SHORT (JUMPER) ACROSS TERMINALS OF GAS VALVE OR SYSTEM CONTROL  
TO TEST OPERATION. THIS WILL DAMAGE THE THERMOSTAT AND VOID YOUR WARRANTY.  
CAUTION: DO NOT SWITCH SYSTEM TO COOL IF THE TEMPERATURE IS BELOW 50°F (10°C). THIS CAN DAMAGE  
THE AIR CONDITIONING SYSTEM AND CAUSE PERSONAL INJURY.  
COOL-OFF-HEAT-EM  
1. Place the COOL-OFF-HEAT-EM  
switch into the COOL position  
2. Press the button until the temperature  
setting is at least 3 degrees below the room temperature. The air  
conditioning system should turn on within a few seconds.  
NOTE: ONCE THE THERMOSTAT TURNS THE SYSTEM OFF WHILE IN THE COOL OR HEAT MODE, A BUILT-IN DELAY KEEPS THE COM-  
PRESSOR FROM TURNING ON FOR ABOUT  
BREAK) IS NECESSARY. TO OVERRIDE THE 5-MINUTE DELAY FOR INSTALLATION, PRESS RESET. THIS WILL ERASE THE DELAY AS WELL  
AS ALL PROGRAMMING  
5
MINUTES. THIS PROTECTS THE COMPRESSOR. NO ADDITIONAL TIME DELAY RELAY (DELAY ON  
.
COOL-OFF-HEAT-EM  
COOL-OFF-HEAT-EM  
3. Put the COOL-OFF-HEAT-EM switch into  
the OFF position. The air conditioning  
system should turn off. The fan may  
continue to run for a short period of time.  
4. Put the COOL-OFF-HEAT-EM switch  
into the HEAT position.  
5. Press the  
button until the temperature setting is at least  
3 degrees above room temperature. The heating system should turn  
on. The fan may not turn on immediately, depending on the fan delay  
built into the furnace.  
COOL-OFF-HEAT-EM  
6. Put the COOL-OFF-HEAT-EM switch  
into the OFF position. The heating  
system should turn off. Once again,  
the fan may have a delay.  
AUTO - ON  
7. Put the  
AUTO-ON switch  
to the ON position. The blower  
fan should turn on.  
AUTO - ON  
8. Put the  
AUTO-ON switch  
to the AUTO position. The blower  
fan should turn off.  
7
More user manuals on ManualsBase.com  
GeneralDetails
NameRobertshaw 9602 Programmable Thermostat User Manual
MakeRobertshaw
LanguageEnglish
FiletypePDF (Download)
File size0.21 MB
Download PDF
1 Star2 Stars3 Stars4 Stars5 Stars (1 votes, average: 5.00 out of 5)
Loading...
Robertshaw RS9220 Programmable Thermostat Installation Guide
Robertshaw RS9220 Programmable Thermostat Installation Guide
Robertshaw RS10420T WIFI Programmable Thermostat User Guide
Robertshaw RS10420T WIFI Programmable Thermostat User Guide
Robertshaw RS8110 Non Programmable Thermostat Instruction Manual
Robertshaw RS8110 Non Programmable Thermostat Instruction Manual
Robertshaw RS8210 Thermostat Installation Guide
Robertshaw RS8210 Thermostat Installation Guide
Robertshaw RS8210 Non-Programmable Multi-Stage 2H-1C Wall Thermostat User Manual
Robertshaw RS8210 Non-Programmable Multi-Stage 2H-1C Wall Thermostat User Manual
Robertshaw RS9220 Digital Programmable Wall Thermostat Instruction Manual
Robertshaw RS9220 Digital Programmable Wall Thermostat Instruction Manual
Robertshaw RS9320T Programmable Touchscreen Wall Thermostat Instruction Manual
Robertshaw RS9320T Programmable Touchscreen Wall Thermostat Instruction Manual
Robertshaw RS9423T Thermostat Installation Guide
Robertshaw RS9423T Thermostat Installation Guide
Robertshaw RTC500 WIFI Thermostat Instruction Manual
Robertshaw RTC500 WIFI Thermostat Instruction Manual
Robertshaw RS1110 Programmable 1 Heat 1 Cool Wall Thermostat Instruction Manual
Robertshaw RS1110 Programmable 1 Heat 1 Cool Wall Thermostat Instruction Manual

Robertshaw 9602 Programmable Thermostat User Manual