PRO1 T751i Thermostat Installation Guide
WIFI Setup
Specifications
Specifications
The following WIFI Technician steps are intended for viewing
information and resetting your WIFI connection. They are not typically
necessary for installation or initial setup.
The display range of temperature ... 41˚F to 95˚F (5˚C to 35˚C)
The control range of temperature.... 44˚F to 90˚F (7˚C to 32˚C)
Load Rating............................................... 1 amp per terminal, 1.5 amp
maximum all terminals combined
1. Press and hold the + and – buttons together for 3 seconds.
2. Press and hold the WIFI Button on the lower left.
Swing (cycle rate or differential) ...... Heating is adjustable from 0.2˚ to 2.0˚
Cooling is adjustable from 0.2˚ to 2.0˚
Power source ...........................................18 to 30 VAC, NEC Class II, 50/60 Hz
for hardwire
3. Use the + or - buttons to change settings and the lower left and right
buttons to move from one step to another. To exit tech setup: press and
hold the + and - buttons for 3 seconds or wait 60 seconds.
LCD Will Show Adjustment Options
Default
Tech Setup Steps
Operating ambient ............................... 32˚F to +105˚F (0˚C to +41˚C)
Operating humidity .............................. 90% non-condensing maximum
Dimensions of thermostat ................. 4.7”W x 4.3”H x 0.9”D
This displays the WIFI Firmware
N/A
SSID
Identification Number which can
be used for trouble shooting. If
the thermostat is not connected
to WIFI it will display “WIFI IDLE”.
WIFI SSID
N/A
WIFI
FW011500
Frequency Range..................... 2.4 Ghz ISM radio band
WIFI Module............................... Supporting 802.11
B/G/N Standards
N/A
This displays the Thermostat
Firmware Identification Number
which can be used for trouble
shooting.
FW
Firmware
N/A
YES
990914
Hold the
button for
This step resets the WIFI
connection when needed allowing
you to reconnect to a new local
WIFI network.
YES
three seconds and you will
be returned to the home
screen. WIFI RESET will not
be displayed.
Reset WIFI
WIFI RESET
WIFI Reset Process
This step resets the WIFI connection when needed for applications like
replacing WIFI routers, changing networks, or any other time you might
need to disconnect and reconnect your thermostat to a local WIFI
network.
1. Enter the WIFI Menu and cycle through the steps until you get to the
RESET WIFI setting.
2. Hold the + button for three seconds.
3. You will now be automatically returned to the home screen and “WIFI
RESET”network will be displayed indicating the thermostat is no longer
connected to the local WIFI network. You will need to recommission the
thermostat to control your system from the PRO1 Connect App.
14
13
| General | Details |
|---|---|
| Name | PRO1 T751i Thermostat Installation Guide |
| Make | PRO1 |
| Language | English |
| Filetype | PDF (Download) |
| File size | 0.3 MB |
(1 votes, average: 5.00 out of 5)
Loading...
PRO1 T731W Wireless PTAC Non-Programmable Thermostat Installation Guide
PRO1 T805 Non Programmable Thermostat Instruction Manual
PRO1 T701 Digital Non Programmable Thermostat Instruction Manual
PRO1 IAQ T721i Digital WIFI Programmable Thermostat User Manual
PRO1 R250W Wireless System Thermostat Owner’s Manual
PRO1 T725 Thermostat User Guide
PRO1 T755 Heat 2 Cool Dual Fuel Thermostat User Manual
PRO1 T771 Programmable Electronic Thermostat Instructions
Danfoss MBC 8000, MBC 8100 Heavy Duty Thermostat Installation Guide
Danfoss TP5001B Programmable Room Thermostat User Guide
COPELAND 1F95G-1235GC Humidity Universal Thermostat Instruction Manual
VIMAR 02912 Wi-Fi Thermostat Instruction Manual
hansgrohe AXOR UNO2 Concealed Thermostat with Shut Off Valve Instruction Manual
Google Nest Learning Thermostat Installation Guide
emos P5686 Immersion Thermostat Instructions
Emerson ST55 Sensi Wi-Fi Programmable Thermostat Installation Guide
HERSCHEL 12860 T-BT Battery Powered Wireless Thermostat Instruction Manual
SALUS RT100 Electronic Room Thermostat Instruction Manual