HITACHI ATW-RTU-05 Wireless Intelligent Room Thermostat Instruction Manual
INSTALLATION INSTRUcTIONS
1 INSTALLATION INSTRUCTIONS
1.1 SAFETY SUMMARY
•
•
All use or modification of the equipment not anticipated by Johnson
Controls-Hitachi Air Conditioning Spain, S.A.U. could lead to danger
in using it.
!
DANGER
Adhere to the electrical standards in effect, as well as the following
points:
Use only the cables and accessories supplied.
•
It is imperative to switch off the supply for the sector to which
the product will be connected before proceeding to installation.
Risk of electric shock.
?
NOTE
•
•
Avoid positioning the receiver against or close to any metallic
part in order to avoid any radio transmission drop.
•
Place the product in a detachable manner close to the device to be
controlled. The product should be installed at a height of less than
1.5m high.
Ensure that there is no dust on the connection points such as
the power terminals and/or on the cable. This may cause a fire
or electric shock.
•
Do not install the gateway where devices using radiofrequencies as
means of transmission are prohibited (Refer to local standards in
effect).
!
CAUTION
•
•
•
Do not install the gateway close to devices that may be affected by
radio waves.
•
•
•
Avoid falls and collisions.
Never attempt to immerse the product in liquid.
Do not install the gateway where persons wearing a pacemaker may
be present.
Do not use abrasive products or solvents to clean the casing. Its
surface may be cleaned using a soft, dry cloth.
Do not install the gateway in a damp environment (for example, a
bathroom).
•
•
Do not attempt to open the casing.
Do not use this product outside. Do not place the connection wire
outside.
1.2 FACTORY SUPPLIED ACCESSORIES
Description
Quantity
ATW-RTU-05 (Receiver + Thermostat)
Screw and plug
1
2
1
Installation and operation manual
1.3 INSTALLATION INFORMATION
As these products communicate using RF technology special
care must be taken during installation. The location of the RF
components as well as the building structure may influence
performance of the RF system. To assure system reliability,
please review and apply the information given below.
It is important to take into consideration that walls and ceilings
will reduce the RF signal. The strength of the RF signal
reaching the RF Receiver depends on the number of walls and
ceilings separating it from the Room Thermostat, as well as the
building construction. Walls and ceilings reinforced with steel
or plasterboard walls lined with metal foil reduce the RF signal
significantly more.
Within a typical residential building the two products should
communicate reliably within a 30m range.
1.4 RF RECEIVER INSTALLATION
1
Disconnect the main power from the system.
To ensure your safety, always make sure main power is
switched off before accessing wiring.
2
Remove the cover from the RF receiver.
1
PMML0411A rev.3 - 12/2016
| General | Details |
|---|---|
| Name | HITACHI ATW-RTU-05 Wireless Intelligent Room Thermostat Instruction Manual |
| Make | Hitachi |
| Language | English |
| Filetype | PDF (Download) |
| File size | 1.03 MB |
(1 votes, average: 5.00 out of 5)
Loading...
HITACHI ATW-RTU-12 Room Thermostat Instruction Manual
HITACHI ATW-RTU-11 Wireless Ambient Thermostat Instruction Manual
HITACHI ATW-RTU-11 Compact Wired Thermostat User Manual
HITACHI ATW-RTU-11 Wireless Thermostat Instruction Manual
Honeywell Smart Color Touchscreen Programmable Thermostat RTH9590 User Manual
Braeburn 8205-100-02 Universal Smart Wi-Fi Thermostat Instruction Manual
DAIKIN DTST-ONE-ADA-A One Lite Connected Thermostat User Guide
VIMAR 01910 Electronic Timer Thermostat Instruction Manual
somfy 1870776 Wired IO Thermostat Instructions
alza WT410 Thermostat User Manual
GLOBAL HY06RF-BW/WW/WE Thermostat User Manual
Danfoss INT69 Thermal Protection Thermostat Instruction Manual
Haswill Electronics STC-8080H Thermostat User Guide
GENERAL LIFE ARUNA 302S Digital Room Thermostat User Manual