eurotronic Comet Zigbee Energy Saving Radiator Thermostat Instruction Manual

1

2

3

4

5

6

7

8

9

10

11

12

13

14

15

16

17

18

19

®

Comet Zigbee  

ENERGY-SAVING RADIATOR THERMOSTAT  

WITH ZIGBEE  

EN  

www.eurotronic.org  

VIEW FULL SCREEN PDF MANUAL

General	Details
Name	eurotronic Comet Zigbee Energy Saving Radiator Thermostat Instruction Manual
Make	EUROTRONIC
Language	English
Filetype	PDF (Download)
File size	0.47 MB

Download PDF

(1 votes, average: 5.00 out of 5)

Loading...

• ALL THERMOSTAT INSTRUCTIONS & USER MANUALS
• EUROTRONIC

eurotronic Comet Zigbee Energy Saving Radiator Thermostat Instruction Manual Overview

Summary of Contents

• Page 1: Energy-saving radiator thermostat with Zigbee.
• Page 2: Delivery scope Warnings Introduction of Comet Zigbee Control and display elements Buttons LED-lights Insert batteries Set up into a Zigbee network Mounting at radiator Operating the device
• Page 3: Warnings This signal word designates a hazard with a medium level of risk which, if not avoided, can result in death or serious injury. Comet Zigbee is intended for indoor use. Operate Comet Zigbee only as described in the user manual. Comet Zigbee should only be stored in a dry and dust-free place out of direct sunlight. Do not continue to operate the device if it shows obvious damage. Comet Zigbee may not be rebuilt, modified or opened. Improper handling of batteries can cause an explosion. Leaking battery acid can cause burns. Avoid contact of battery acid with skin, eyes and mucous membranes. If children play with the thermostat or the packaging, they can swallow small parts and choke.
• Page 4: Introduction of Comet Zigbee Thank you for choosing a product from Eurotronic Technology GmbH. This device can conveniently adjust the temperature in your rooms according to your wishes and help you effectively reduce your heating costs. Development and manufacturing are 100% “Made in Germany,” which ensures the highest quality and technology. This instruction manual will help you to start using your device easily and quickly. This is Comet Zigbee Comet Zigbee is an energy-saving radiator controller that is compatible with the Zigbee wireless standard and offers modern and simple operation. It automatically controls your room temperature according to your specifications and is configurable, directly on the controller or conveniently via smartphone through your Zigbee network. Control- and Display Elements Buttons Minus Button: Decrease target temperature for 0.5°C with a short push. Plus Button: Increase target temperature for 0.5°C with a short push. Button in battery compartment: Comet Zigbee reacts to remove commands from the gateway (Exclusion) with a 5-second press and hold. Factory reset: Press and hold for 10 seconds in the battery compartment. Activate or deactivate key lock/child lock: Press and hold both buttons for 3 seconds when displayed.
• Page 5: LED-lights indicate the status of radio connection and operations. The light is on when the radio connection is established and turns off when lost. Pairing mode is active during inclusion, while exclusion mode indicates removal operations. Adaptation must be initiated for proper functioning. The light animates while adaptation is in progress. It also lights up when the key lock is activated or deactivated. A battery level below 15% is indicated by the light. Failure of removal operations is signaled by the light. The absence of a mounted valve or detection issues will trigger a light signal. The light indicates when valve movement is not possible or if the valve is stuck.
• Page 6: Installation The Comet Zigbee does not belong to any Zigbee network ex works and must be added to an existing network to communicate with other devices. This process is called inclusion, while leaving a network is called removal (exclusion). Both operations must be initiated by a primary Zigbee controller. Behavior in the Zigbee network The Comet Zigbee can be added to any Zigbee network and operate with other Zigbee certified devices and applications from other manufacturers. Non-battery powered network nodes act as repeaters and improve the reliability of the wireless network. Network security Comet Zigbee can communicate encrypted with other Zigbee devices if they support encrypted communication. A security enabled Zigbee controller is required to use the full functionality of the Comet Zigbee. Insert batteries Remove the battery cover by pulling it upwards by the notch. Insert the batteries, ensuring correct polarity, and do not use rechargeable batteries. Reattach the battery cover by pressing it on until it clicks. The configuration of your Comet Zigbee will be preserved during battery changes.
• Page 7: Set up into a Zigbee network. Put your primary Zigbee controller into include mode. If Comet Zigbee was successfully added, the LED display will show the received node ID. Inclusion is executed. Counter counts down from 99. Inclusion successful. For Node-ID > 99: First hundreds digit flashing then 10s and 1s digit permanently on. Animation for reaching the mounting position runs. Inclusion error may occur. Press key to confirm or clear error message.
• Page 8: Mounting at a radiator involves several steps after adding the thermostat. The LED display shows an animation and then indicates Ad after the thermostat is added. Unscrew the old thermostatic head completely and pull it off the valve. Select a suitable adapter if necessary and mount it on the valve. Screw the thermostat onto the valve or adapter by turning the union nut clockwise. Continue with the adaptation process after mounting the Comet Zigbee on the valve. Remove the connecting pieces of the plastic adapters completely before using one of the enclosed adapters. No adapter is required for certain valves with a thread dimension of M30 x 1.5 mm. Adapters for specific valves like Danfoss RAV, RA, and RAVL are enclosed. You will need an adapter for various other valve types listed in the document.
• Page 9: You can purchase further metal adapters for a fee from our partners. An overview of the metal adapters and corresponding ordering options can be found under the provided link. If you are not sure which valve you have, see the adapter list in the FAQ section. Adaptation is executed. Press and hold the specified keys together for 3 seconds to start adaptation. If a new adaptation is required later, remove the batteries from the device and reinsert them. Target temperature of 21° is displayed.
• Page 10: Adaptation error. Press and hold the key together for 3 seconds. Mounting position is prepared. Animation is displayed. Adaptation failed. Repeat the process. A device out of a Zigbee network. Put your Zigbee controller into exclusion mode. Press key in battery compartment for 5 seconds. Exclusion successful.
• Page 11: Dismounting Remove the Comet Zigbee from the network before disassembling the device. Put your Zigbee controller in the removal mode (Exclusion). Press and hold the button in the battery compartment for 5 seconds. The LED display shows Node ID 0 if the removal was successful. Wait until the display shows “PA”. Unscrew the union nut counterclockwise and remove it from the Comet Zigbee valve. Factory reset Press and hold the button in the battery compartment for at least 10 seconds. A counter will run on the thermostat’s display from the 5th second on. Keep the button pressed until 10 appears on your Comet Zigbee. The controller will be in pairing mode again after the reset.
• Page 12: Operating the device involves using the LED display to show the setpoint temperature or valve opening degree in actuator mode. The target temperature can be adjusted using specific buttons, and changing the setpoint temperature activates heating mode. The input range for the set temperature is between 8° and 28°C, with the device switching to boost or off mode if exceeded. Child protection or key lock can be activated or deactivated by holding down two buttons for three seconds when the display is off. At the highest protection level, local operation is disabled, and the child safety lock cannot be removed locally. Changing the operating mode includes off mode, heating mode, and boost mode, each requiring specific button presses. In window open detection mode, the device switches to off mode for 10 minutes if the temperature drops abruptly. The window open detection mode automatically exits after 10 minutes, restoring the previous active mode. In Manufacturer Specific Mode, window open detection is not executed. The sensitivity of the window open detection can be configured.
• Page 13: Operating Zigbee Cluster Endpoint Cluster ID Server Client Basic Power configuration Thermostat OTA Basic Read/Write Attribute ID Manufacturer Reportable Specific Cluster Attribute Default Value Power Configuration Battery Charge Remaining
• Page 14: Thermostat Local temperature Pi heating demand (valve position %) Occupied heating set point Unoccupied heating set point Min heat setpoint limit Max heat setpoint limit System mode TRV mode Current temperature set point
• Page 15: This attribute defines the firmware version of the device. With every release of new firmware the value of this attribute will be updated. The attribute can only be read. An unsigned integer is supplied when reading, representing the current valve position. 0 = Valve closed. Errors include valve not moving and valve movement too slow. Any value written to the thermostat heating setpoint attribute will automatically be copied to the current temperature setpoint attribute. Pre-configured reporting interval includes device type, cluster, attribute, and attribute ID.
• Page 16: Errors and messages help Batteries almost empty: Replace the batteries. Boiler water temperature O.K?: Adjust the temperature of the boiler water. Valve does not open: Move the valve pin back and forth manually. Radiator does not heat up: Check for summer/heating break. Valve does not close completely: Move the valve pin back and forth manually. Pressure piece falls out: Remove the batteries from the device and insert the pressure piece. The errors message can be cleared by pressing the key. Joining failed: Zigbee controller not in pairing mode or out of range. Valve not mounted or no valve detected: Ensure correct mounting and valve movement. Valve pin freely movable?: Check for any obstructions.
• Page 17: Cleaning and storage information includes a risk of damage warning. Incorrect handling of the thermostat can cause damage. Do not submerge the thermostat in water or other fluids. Avoid using abrasive cleaning agents or sharp cleaning implements. Clean the thermostat with a soft and dry cloth without applying pressure to the display. Technical specifications include the device name Comet Zigbee and its EAN 4260012712438. The dimensions are 62x68x83 mm, and it weighs 230g including batteries. The power supply consists of 2 x 1.5V LR6/Mignon/AA batteries. The radio frequency is 2.4 GHz with a transmitting power of +8dBm. The degree of protection is IP20, and the connection type is M30 x 1.5mm. Support and contact information is provided for technical support.
• Page 18: Warranty period is 24 months and starts on the day of purchase. Defective energy-saving controllers can be sent for repair or replacement during the warranty period. Repair or replacement does not start a new warranty period. Warranty is only guaranteed for functions of the device, not for interactions with third-party components. Technical data is guaranteed only with specific valve brands. Functionality with unlisted third-party valves/adapters is the user's responsibility. Repairs after the warranty period are subject to a charge. Old devices must not be disposed of with household waste and should be recycled properly. Batteries must be disposed of at designated collection points. Eurotronic Technology GmbH declares compliance with Directive 2014/53/EU for the Comet Zigbee radiator thermostat.