EUROSTER 2026TXRX Air Conditioning Thermostat Instruction Manual
EUROSTER 2026TXRX – INSTALLATION AND OPERATION MANUAL
8
Important note:
The holiday mode is activated when the settings are confirmed by pressing
button.
icon appears on the display. Leaving the thermostat idle for more than 15 seconds cancels the
setting and restores normal operation.
Setting the vacation mode:
1. Turn the knob to the START and press
button. The thermostat goes to temperature
and buttons to ad-
setting mode – the temperature readout starts flashing. Use
just the desired temperature, then confirm with
2. The display shows:
or
.
– duration of the vacation mode on the left-hand side
- the time or date when the vacation mode ends on the right-hand side
Use and buttons to set the duration of the vacation mode.
3. The maximum number of hours is 48. The number of days is selected above this value.
The number on the right in such a case indicates the date (the display shows "Date"
and the symbol of the weekday)
You may also set the infinite duration of the vacation mode.
4. After entering the vacation duration setting, “1h” appears on the display. The changes
are implemented according to the following order:
"-" means infinite duration; vacation mode in such a case may only be finished manual-
ly.
5. Having set the period, confirm it by pressing
.
RESTORING NORMAL OPERATION
The thermostat automatically restores normal operation at a specified time. If the selected
period was expressed in days, normal operation will be restored at midnight on the selected
day (that is, at the beginning of the day).
If you plan to go back e.g. on Sunday, the thermostat will turn on the heating on Sunday at
midnight and the room will be heated to normal temperature before you return.
If you select an infinite period, the vacation mode should be turned off manually.
In any case, the holiday mode is switched off by pressing
button.
TIME/DAYS INDICATION
If the preset period is expressed in hours, the letter "h" is shown after the number, whereas if
it is expressed in days "d" appears on the display and "Date" is shown above the right number.
TEMPORARY CHANGE OF TEMPERATURE
Unlike in vacation mode, one does not set duration for the temporary change of temperature.
This mode is active until the next program starts.
To activate this function, set the desired temperature with
and
buttons. It is stored after
, and all but-
3 seconds. You can also confirm the setting using . The display shows
tons except
and
become locked.
Example:
P1 maintains a temperature of 20 °C from 9.00 a.m., whereas P2 maintains 21 °C from 2.00
p.m. At noon, the user activates a temporary change of temperature, sets the temperature to
15 °C. The target temperature will be:
20 °C – 9.00 a.m. ÷ 12.00 p.m
15 °C – 12.00 p.m. ÷ 2.00 p.m.
21 °C – 2.00 p.m. ÷ ….....
| General | Details |
|---|---|
| Name | EUROSTER 2026TXRX Air Conditioning Thermostat Instruction Manual |
| Make | EUROSTER |
| Language | English |
| Filetype | PDF (Download) |
| File size | 0.62 MB |
(1 votes, average: 5.00 out of 5)
Loading...
EUROSTER 4040 Smart Programmable Thermostat User Manual
EUROSTER 2006TXRX Wireless Programmable Thermostat Installation Guide
WATTS TEK564 Invita WiFi Thermostat Instruction Manual
KETOTEK KT3200 Plug In Thermostat Day Night Temperature Controller Instruction Manual
beok TGW60 Thermostat User Guide
WATTS Tekmar Wi-Fi Thermostat Instruction Manual
sinope TH1400NP Non Programmable Low Voltage Thermostat Installation Guide
Danfoss RET-MD Electronic Intelligent Dial Setting Thermostat Installation Guide
VIESSMANN ViCare ZK05991 Wireless Thermostat Instruction Manual
SUNTOUCH SunStat 1140-01 R4 Relay Thermostat User Manual
stelpro STZW402 ELECTRONIC THERMOSTAT SMART HOME User Guide
SEALEY FH2010.V2 2000W Fan Heater with Thermostat User Manual