Home > EPH CONTROLS > EPH CONTROLS eTRV-HW Smart Hot Water Thermostat Instruction Manual
EPH CONTROLS eTRV-HW Smart Hot Water Thermostat Instruction Manual
1) Press and hold the release mechanism on the side of
the eTRV-HW, while holding pull the cover up and it
will slide off the eTRV-HW.
2) Insert the 2 x AA batteries and replace the cover.
Pair the eTRV-HW to the RF16. (see page 18)
- Mark the eTRV zone by using the stickers provided.
- Note the room name on the 16 zone list provided,
this will help the user of the system identify the
zones if it’s needed in future.
3) The eTRV-HW can be mounted to a SEMTRVB22C
valve with a M30 x 1.5mm thread. Rotate the ring at
the base of the eTRV-HW so it threads onto the
SEMTRVB22C until it’s tight. It will automatically adapt
its stroke to that of the valve.
It’s recommended that the eTRV-HW is opened to
make it easier to mount, this is done by calling
for heat on the eTRV-HW or RF16 and it will
retract the spindle.
4) Position the eTRV-HW on the valve so the screen is
orientated correctly.
Note:
The eTRV-HW is designed for use with SEMTRVB22C Valve.
EPH Controls Ltd.
9
| General | Details |
|---|---|
| Name | EPH CONTROLS eTRV-HW Smart Hot Water Thermostat Instruction Manual |
| Make | EPH CONTROLS |
| Language | English |
| Filetype | PDF (Download) |
| File size | 0.6 MB |

EPH CONTROLS eTRV-HW Smart Cylinder Thermostat User Guide

EPH CONTROLS eTRV Smart Radiator Thermostat Instruction Manual

EPH CONTROLS 20221026 RFRA – RF Room Thermostat Instruction Manual

EPH CONTROLS CDTP2 Hardwired Room Thermostat Instruction Manual

EPH Controls CDT2-24 24V Room Thermostat Installation Guide

EPH CONTROLS RFCA RF Cylinder Thermostat Instruction Manual

EPH CONTROLS PR092K7 RF Cylinder Thermostat Instruction Manual

EPH CONTROLS COMBIPACK2 Smart Thermostat with Automation and Optimum Start Instructions

EPH CONTROLS CRT2 Room Thermostat Instruction Manual

EPH CONTROLS CDC2 Cylinder Room Thermostat User Guide









































