Home > EPH CONTROLS > EPH CONTROLS CP4B Battery Powered Programmable Thermostat User Guide
×
- 1. Battery Powered Programmable Thermostat (Installation And Operation Guide)
- 2. Installation Instructions (Factory Default Settings → Frost Protection → Specifications → Wiring Diagram → How Your Programmable Thermostat Works → Operating Instructions)
- 3. Holiday Function (Backlight Mode Selection → Battery Low Warning → Frost Protection → Replacing The Batteries → Installer Menu → System Architecture)
- 4. Cp4b Room Thermostat (Installation Instructions)
- 5. Factory Default Settings (Frost Protection → Operating Mode)
- 6. Specifications (Power Supply → Battery Replacement → Temp. Control Range → Ambient Temperature → Contact Rating → Dimensions → Temperature Sensor)
- 7. Wiring Diagram (Internal Wiring Diagram For Cp4b → Opentherm)
- 8. How Your Programmable Thermostat Works (When The Thermostat Is In The Auto Mode, It Will Operate According To The Times And Temperatures That Have Been Programmed. The User Can Select From 6 Different Programs Per Day, Each With A Time And A Temperature.)
- 9. Mounting & Installation (Caution! → Installation And Connection Should Only Be Carried Out By A Qualified Person. → Only Qualified Electricians Or Authorised Service Staff Are Permitted To Open The Thermostat. → If The Thermostat Is Used In A Way Not Specified By The Manufacturer, Its Safety May Be Impaired. → Prior To Setting The Thermostat, It Is Necessary To Complete All Required Settings Described In The Section. → This Thermostat Must Be Directly Mounted On A Wall.)
- 10. Mounting & Installation (The Mounting Height Should Be 1.5 Metres Above The Floor Level. → The Thermostat Should Be Wall Mounted In The Room Where The Heating Is To Be Controlled. → The Place Of Installation Should Be Chosen So That The Thermostat Can Measure The Room Temperature As Accurately As Possible. → Exposure To Direct Sunlight Or Other Heating / Cooling Sources Should Be Avoided When The Thermostat Is Mounted. → Lower The Flap At The Front Of The Thermostat. → Remove The Backplate From The Thermostat By Inserting A Screwdriver Into The Slots In The Battery Compartment And Pull Apart. → Fix The Backplate To The Wall And Ensure Electrical Connections Are Terminated Correctly.)
- 11.
- 12. Cp4b Room Thermostat (Operating Instructions)
- 13. Lcd Symbol Description (Current Program → Temperature → Current Time → Operating Mode)
- 14. Button Description (Set Point Increase → Set Point Decrease → Reset Button → Automatic Mode → Manual Mode → Program Mode)
- 15. Resetting The Thermostat (Rfrp-ot Room Thermostat → Keypad Lock And Unlock)
- 16. Setting The Date, Time, Programming Mode And Daylight Savings Time (Time → Auto)
- 17. Factory Program Setting (Day → Hour)
- 18. Programming Modes (/2 Day Mode → Day Mode → Hour Mode)
- 19. Adjust The Program Setting In 5/2 Day Mode (Prog → Auto → Time)
- 20. Copy Function (Set The Times And Temperatures For The Day That You Wish To Copy From → When Still On The Day Press The Button → The Day Of The Week That You Have Selected Will Be Shown With Copy → You Can Copy To Multiple Days Using The Button → Press The Button When Copying Has Been Completed)
- 21. Temporary Override (Permanent Override)
- 22. Boost Function (Boost → Cp4b Room Thermostat)
- 23. Holiday Function (Holiday From → Holiday To)
- 24. Backlight Mode Selection (Battery Low Warning)
- 25. Replacing The Batteries
- 26. Installer Menu (Opentherm Instructions → Mode (normal / Optimum Start / Tpi) → Hi Lo (limiting The Thermostat) → Hysteresis (differential) → Calibration → Frost Protection)
- 27. Po 1 Operating Mode (Nor (normal Mode) → Os (optimum Start Mode))
- 28. Po 1 Operating Mode (Os (optimum Start Mode) → Boiler Plus → Cp4b Room Thermostat)
- 29. Optimum Start Control Graph With Ti = 20 (Optimum Start Control Graph With Ti = 15 → Optimum Start Control Graph With Ti = 10 → Example When Ti = 20 → Example When Ti = 10)
- 30. Po 1 Operating Mode (Tpi (time Proportional & Integral Mode))
- 31. Tpi Control (Setpoint Temperature → Proportional Bandwidth → Heating On → Heating Off → Example: Program)
- 32. Po 2 Setting High & Low Limits (Po 3 Hysteresis Hon And Hoff → Cp4b Room Thermostat)
- 33. Calibrate The Thermostat (Frost Protection → Exit)
- 34. Po 6 Setting Dhw Temperature (Cp4b Opentherm Instructions)
- 35. Po 7 Opentherm Information (Displayed On Screen → Description → Remark)
- 36. Po 8 Dhop (Po 9 Set Opentherm Parameters → Cp4b Opentherm Instructions)
- 37. Parameter (Description → Range → Default → Influence Of Room Sensor On Modulation Of The Boiler → Maximum Allowable Ch Water Setpoint)
- 38. Po 9 Set Opentherm Parameters (Climatic Curve → Cp4b Opentherm Instructions)
- 39. System Architecture (Cp4b Thermostat → Opentherm Boiler)
- 40. Eph Controls Ie (Eph Controls Uk)
×
EPH CONTROLS CP4B Battery Powered Programmable Thermostat User Guide
| General | Details |
|---|---|
| Name | EPH CONTROLS CP4B Battery Powered Programmable Thermostat User Guide |
| Make | EPH CONTROLS |
| Language | English |
| Filetype | PDF (Download) |
| File size | 1.38 MB |

EPH CONTROLS eTRV-HW Smart Cylinder Thermostat User Guide

EPH CONTROLS eTRV-HW Smart Hot Water Thermostat Instruction Manual

EPH CONTROLS eTRV Smart Radiator Thermostat Instruction Manual

EPH CONTROLS 20221026 RFRA – RF Room Thermostat Instruction Manual

EPH CONTROLS CDTP2 Hardwired Room Thermostat Instruction Manual

EPH Controls CDT2-24 24V Room Thermostat Installation Guide

EPH CONTROLS RFCA RF Cylinder Thermostat Instruction Manual

EPH CONTROLS PR092K7 RF Cylinder Thermostat Instruction Manual

EPH CONTROLS COMBIPACK2 Smart Thermostat with Automation and Optimum Start Instructions

EPH CONTROLS CRT2 Room Thermostat Instruction Manual


REHAU NEA H 24 V Room Thermostat Instruction Manual

ADVENT AIR ACTH12 Digital LCD Thermostat Instruction Manual

ENGO CONTROLS EFAN-24W, EFAN-24B Fan Coil Thermostat User Guide

PNi CT36PRO Smart Thermostat Instruction Manual

Honeywell Home X1N Non Programmable Thermostat Installation Guide

TCL IPOWER Heat Mat Thermostat Instruction Manual

MRCOOL 16117100003415 Versa Pro Wired Thermostat Owner’s Manual

WATTS W561 WiFi Thermostat Instruction Manual

heatmiser neoStat Touch-e Touchscreen Electric Floor Heating Thermostat Owner’s Manual

Moes BHT-3000 Series Thermostat User Guide
Table of Contents
- 1. Battery Powered Programmable Thermostat - Installation And O... →
- 2. Installation Instructions - Factory Default Settings →
- 3. Holiday Function - Backlight Mode Selection →
- 4. Cp4b Room Thermostat - Installation Instructions →
- 5. Factory Default Settings - Frost Protection →
- 6. Specifications - Power Supply →
- 7. Wiring Diagram - Internal Wiring Diagram For Cp4b →
- 8. How Your Programmable Thermostat Works - When The Thermostat... →
- 9. Mounting & Installation - Caution! →
- 10. Mounting & Installation - The Mounting Height Should Be 1.5 ... →
- 11. Page 11 →
- 12. Cp4b Room Thermostat - Operating Instructions →
- 13. Lcd Symbol Description - Current Program →
- 14. Button Description - Set Point Increase →
- 15. Resetting The Thermostat - Rfrp-ot Room Thermostat →
- 16. Setting The Date, Time, Programming Mode And Daylight Saving... →
- 17. Factory Program Setting - Day →
- 18. Programming Modes - /2 Day Mode →
- 19. Adjust The Program Setting In 5/2 Day Mode - Prog →
- 20. Copy Function - Set The Times And Temperatures For The Day T... →
- 21. Temporary Override - Permanent Override →
- 22. Boost Function - Boost →
- 23. Holiday Function - Holiday From →
- 24. Backlight Mode Selection - Battery Low Warning →
- 25. Replacing The Batteries →
- 26. Installer Menu - Opentherm Instructions →
- 27. Po 1 Operating Mode - Nor (normal Mode) →
- 28. Po 1 Operating Mode - Os (optimum Start Mode) →
- 29. Optimum Start Control Graph With Ti = 20 - Optimum Start Con... →
- 30. Po 1 Operating Mode - Tpi (time Proportional & Integral Mode... →
- 31. Tpi Control - Setpoint Temperature →
- 32. Po 2 Setting High & Low Limits - Po 3 Hysteresis Hon And Hoff →
- 33. Calibrate The Thermostat - Frost Protection →
- 34. Po 6 Setting Dhw Temperature - Cp4b Opentherm Instructions →
- 35. Po 7 Opentherm Information - Displayed On Screen →
- 36. Po 8 Dhop - Po 9 Set Opentherm Parameters →
- 37. Parameter - Description →
- 38. Po 9 Set Opentherm Parameters - Climatic Curve →
- 39. System Architecture - Cp4b Thermostat →
- 40. Eph Controls Ie - Eph Controls Uk →










































