ENGO EASY230W Wired Thermostat User Guide
WARNING!
After entering the service menu, use
Description of the LCD display + description of the buttons
Installer parameters
-
or
+
buttons to choose parameter.
For the parameter selection to be confirmed, wait 3 seconds.
The screen will appear with the settings that you can change with
0
1
2
3
4
5
6
7
MAIN SCREEN
SWITCH (MODE SELECTION):
1
2
To enter the service menu, press and hold
„MINUS”and„PLUS”buttons for 5 seconds.
-
or
+
buttons.
HEATING
OFF
Wait 3 seconds for the selection to be confirmed.
The thermostat will go to the home screen.
-
+
5 SEC
5 SEC
COOLING
3
4
CHOOSE A CONTROL ALGORITHM
UFH - underfloor heating
RAD - radiator heating
WAIT
3 SEC
-
+
+
...
...
ELE - electric heating
H - hysteresis in the range from 0,4°C to 4,0°C
Example: H = 0,4°C = 0.2°C
-
-
-
-
-
-
+
+
+
+
+
+
1
2
MIN. TEMP SETPOINT LIMIT
Set the minimum temperature
setpoint limit.
WAIT
3 SEC
-
-
1. Current / set room temperature
2. Temperature unit
3. Heating mode icon
1. “MINUS” button
2. “PLUS” button
4. Cooling mode icon
Proper thermostat location
MAX. TEMP SETPOINT LIMIT
Set the maximum temperature
setpoint limit.
WAIT
3 SEC
+
TEMPERATURE CALIBRATION
Displayed (measured) temperature can be
calibrated in steps of 0.1°C
WAIT
3 SEC
-
+
(from -3.5°C to + 3.5°C).
For the thermostat to work properly, it must be installed in a suitable place.
Preferably approx. 150 cm above floor level, away from sources of heat or cold. In
addition, the thermostat should not be installed behind curtains or other obstacles
or in places with high humidity, as this will prevent an accurate measurement of
the temperature in the room. It is not recommended to install the thermostat on
an outside wall, in a draft or in a place where it will be exposed to direct sunlight.
BATTERY STATUS*
WAIT
3 SEC
Check the current battery status (%).
*only for battery version
Lock / Unlock the thermostat’s keys
To lock the keys on the thermostat,
press and hold simultaneously
OUTPUT CONTROL
Select whether the thermostat output has
to work as NO = Normally Open
or NC = Normally Closed.
WAIT
3 SEC
-
-
+
and
seconds. After the
buttons for 7
screen appears,
release the keys. Thermostat is locked.
-
+
To unlock the keys on the thermostat,
press and hold simultaneously
RESET
and
seconds. After the
buttons for 7
screen appears,
release the keys. Thermostat is unlocked.
-
+
WAIT
3 SEC
Reset thermostat settings
to default values.
+
7 SEC
7 SEC
| General | Details |
|---|---|
| Name | ENGO EASY230W Wired Thermostat User Guide |
| Make | ENGO |
| Language | English |
| Filetype | PDF (Download) |
| File size | 0.29 MB |
(1 votes, average: 5.00 out of 5)
Loading...
ENGO E55W230WIFI Wi-Fi Thermostat User Guide
ENGO E20i Series Wi-Fi Wireless Internet Thermostat User Guide
ENGO EONEBATW, EONEBATB Internet Controlled Thermostat User Guide
ENGO E901 Programmable Wired Thermostat User Manual
ENGO E901 Wireless Internet Thermostat User Manual
ENGO EASYBATB Wired Battery Thermostat User Guide
Engo EFAN-230 Zigbee Smart Thermostat Owner’s Manual
Danfoss RT 9E Thermostat Installation Guide
SALUS RT520 Radiator Thermostat User Guide
HIVE 852031 Mini Wireless Heating Smart Thermostat Instructions
GENERAL Life HT220S Digital Room Thermostat User Manual
ENSTO ECO10BTW-J Floor Heating Thermostat Instruction Manual
ENSTO ECO16BTD Combination Thermostat Instruction Manual
TFC Group OP-WFSTAT Wi-Fi Programmable Thermostat User Guide
Danfoss VIIDH102 Living Connect Intelligent Radiator Thermostat User Guide
GE current WTS10 Daintree Wireless Thermostat Installation Guide
Honeywell T4M Programmable Modulating Thermostat Installation Guide