Dettson R02P034 Communicating Thermostat Instruction Manual
2.2 System Modes
On/Off
The button allows to completely turn off the system. Then, no heating, cooling or ventilation
command will be sent to the system.
This button also allows to exit any settings menu.
Fan Modes
Press
to switch between Fan On and Fan Auto.
When the thermostat displays AUTO FAN, the circulating fan will run only when there is a heating or
cooling demand. Otherwise, the fan will run continuously.
Operating Modes
The operating mode can be changed using the
key.
Heat ( ): Heating with the primary heating source (heat pump if present, or furnace).
Auxiliary Heat ( and ): Heating with the auxiliary heating source (furnace). This is only available
when a heat pump is connected.
Cool ( ): Cooling mode is only available when a heat pump or A/C unit is connected.
Auto ( and
): The thermostat will automatically switch between heating and cooling modes.
When there is a demand for the selected mode, the matching icon will start blinking and the
thermostat will command the system to operate.
2.3 Clock Setting
To set the time and day, press the
adjust the blinking value. Press
button. Clock will be displayed. Use the
and
buttons to
to switch between setting the hours, minutes and day.
Once completed, press
to return to the main display.
2.4 Schedule Setting
By default, the scheduling mode is disable. Refer to section 3 to set the desired schedule type.
When scheduling is enabled, press to enter clock configuration (see section 2.3). Using the
button to skip over the clock parameters, the schedule paramaters will be displayed.
7
| General | Details |
|---|---|
| Name | Dettson R02P034 Communicating Thermostat Instruction Manual |
| Make | Dettson |
| Language | English |
| Filetype | PDF (Download) |
| File size | 0.28 MB |

Dettson 2-Stage WiFi Thermostat R02P033 Owner’s Manual


























