Dettson R02P034 Communicating Thermostat Instruction Manual
Table of Contents
1
Installation
4
4
4
1.1 Wiring Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2 Installing Thermostat . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2
Operation
6
6
7
7
7
8
2.1 Display and Controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2.2 System Modes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2.3 Clock Setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2.4 Schedule Setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2.5 Alarms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3
4
Thermostat Settings
Equipment User Menu
9
10
3
1 Installation
This booklet contains installation instruction and information on the thermostat only.
Separate installation instructions for the furnace or air handler and outdoor AC
condensing unit or heat pump are provided.
1.1 Wiring Requirements
Each communicating device in the system has a four wire connection labelled (R, C, 1, 2). Each R,
C, 1, and 2 terminals must be wired consistently. Maximum length from the thermostat to the indoor
unit is 100 feet.
1.2 Installing Thermostat
The thermostat should be placed where the temperature is representative of the general room
conditions, away from cold or warm air draughts, radiant heat and direct sunlight. The thermostat
must not be installed on an outside wall.
1. Using a flat a screwdriver, carefully separate the the top of the thermostat body from the base.
2. Swing the base open and detach it from the body.
3. Connect wires to terminal block on base.
4. Push excess wire into wall and plug hole with a fire resistant material (such as fiberglass
insulation) to prevent drafts from affecting thermostat operation.
5. Attach base snugly to wall using the two provided mounting screws. Levelling is for appearance
only and will not affect thermostat operation.
6. Carefully line up the bottom of the thermostat with the base and snap into place.
4
| General | Details |
|---|---|
| Name | Dettson R02P034 Communicating Thermostat Instruction Manual |
| Make | Dettson |
| Language | English |
| Filetype | PDF (Download) |
| File size | 0.28 MB |

Dettson 2-Stage WiFi Thermostat R02P033 Owner’s Manual


























