CORDIVARI Stand Alone Control Thermostat for VENTANA Fan Coils User Manual
English
8.3 Weekly programming
8. Operating instructions
The thermostat has six heating and cooling periods programmed each
day: three Comfort periods (1, 3 and 5, with the required temperature
when the room is occupied) and three Economy periods (2, 4 and 6, with
the required temperature when the room is unoccupied). You can then
select the time and set-point temperature for each of these periods.
8.1 User interface display
The user interface display is organised as follows:
To set the weekly programme, press and hold the key
four times until the weekday programme settings are displayed. To post
the set-point temperature value, use the keys , then press to
confirm and enter the next period setting. Repeat the procedure for each
period and press once more to confirm and exit.
Default settings for weekly programming
, then press
Energysaving
Valve status
System Mode
Fan Speed
Room Temp.
Set Temp.
Week
Monday /
Friday
Monday /
Period
Friday
(1 2 3 4 5 on
display)
Sunday
Programmable
Lock
Manual
Time
(1 2 3 4 5 on
display)
(7 on display)
Period
Time
06:00
08:00
11:30
13:30
17:00
22:00
Temp.
20°C
15°C
15°C
15°C
22°C
15°C
Time
06:00
08:00
11 :30
13:30
17:00
22:00
Temp.
20°C
20°C
20°C
20°C
20°C
15°C
Time
06:00
08:00
11:30
13:30
17:00
22:00
Temp.
20°C
20°C
20°C
20°C
20°C
15°C
Period 1
Period 2
Period 3
Period 4
Period 5
Period 6
Power
On/Off
Mode Fan
Up
Down
8.2 Operations
The user interface display is organised as follows:
Switching ON and OFF
Press the key
to switch the thermostat on or off
Manual operation and programming
While holding down the key
, the icon flashes. Using the keys
you can select between manual operation and programming.
Set-point temperature
When the thermostat is in manual mode, the set-point temperature can
be selected using the keys
. The icon
is shown on the left side
of the display.
Key lock
By holding down the keys
for 5 seconds, the thermostat can be
locked/unlocked. In the advanced programming settings, it is also
possible to select between partial or full key lock.
Operating modes
By pressing the key
, it is possible to switch between HEATING,
COOLING and VENTILATION modes. In the latter, the solenoid valve (if
present) remains closed while the fan is switched on.
Fan speed
By pressing the key
you can select the fan speed among AUTO,
HIGH, MED and LOW. With AUTO, the fan speed is modulated according
to the difference between the current temperature and the set-point
temperature.
Clock
While holding down the key
, the icon
flashes. Press
again to
set hours, minutes and days of the week (1 = Monday, 2 = Tuesday,
etc.) using the keys
: after 3 seconds the value will be confirmed
automaticall.
- 12 -
Cod. 1910000000402 - nv00
| General | Details |
|---|---|
| Name | CORDIVARI Stand Alone Control Thermostat for VENTANA Fan Coils User Manual |
| Make | CORDIVARI |
| Language | English |
| Filetype | PDF (Download) |
| File size | 0.84 MB |
(1 votes, average: 5.00 out of 5)
Loading...
CORDIVARI Ardesia Electric Radiators with Digital Thermostat Instruction Manual
EPH CONTROLS RFRA RF Room Thermostat Installation Guide
hansgrohe AXOR STARCK X Concealed Thermostat with Shut Off Valve Instruction Manual
GA Plumbing I8 Wi-Fi Underfloor Heating Thermostat User Manual
WIFI Temp2 Battery Operated Thermostat Installation Guide
GENERAL LIFE HT300S RF Digital Room Thermostat User Manual
Honeywell RTH9580 Wi-Fi Color Touchscreen Programmable Thermostat User Guide
beca BAC-005 Series Thermostat User Guide
YETI YET-53 Smart Heating Thermostat User Manual
Thalos Key 230 Bianco Touch Screen Wall Thermostat Instruction Manual
EXPERT4HOUSE BAC-9000 Smart Knob Thermostat User Guide