COPELAND 026-1739 Programmable Touchscreen Thermostat User Manual
3.8.6 Hold Mode
Users can hold the following parameters and prevent them from being changed on the screen or by the BMS:
Setpoint heat (occupied and unoccupied), set point cool (occupied and unoccupied), thermostat mode, occupancy mode and
fan mode.
The HOLD function can be activated only when the schedule is active. When HOLD function is active, BMS cannot disable the
schedule itself nor reset the override.
The HOLD function can be fixed for 1,2,3, or 4 hours.
To activate the HOLD mode:
1. Press the room temperature digits and the menu will be displayed.
2. Use the arrows UP and DOWN to set the time of HOLD (Figure 3-33).
3. Press the “Done” icon to confirm and exit.
4. In the main display, the word “HOLD” will be displayed on the upper-right corner of the screen (replaces the time digits).
Figure 3-33 - Setting the Hold Function
Figure 3-34 - Hold Function When Activated
To deactivate the HOLD mode:
1. Press the room temperature digits, the Hold menu will be displayed.
2. Use the DOWN arrow to set the time of HOLD to zero.
3. Press the “Done” icon to confirm and exit.
4. In the main display, the word “HOLD” will disappear.
The BMS can verify if HOLD mode is active or inactive.
19
©2024 Copeland LP.
026-1739 R4 Programmable Touchscreen Thermostat
| General | Details |
|---|---|
| Name | COPELAND 026-1739 Programmable Touchscreen Thermostat User Manual |
| Make | Copeland |
| Language | English |
| Filetype | PDF (Download) |
| File size | 0.72 MB |

COPELAND 1F95G-1235GC Humidity Universal Thermostat Instruction Manual

COPELAND ST55 Sensi Smart Thermostat Instruction Manual

COPELAND 1F76U-22WFB Series Sensi Lite Smart Thermostat Installation Guide

COPELAND P-N 810-1600 Programmable Touchscreen Thermostat User Guide

COPELAND 1F86-0244 Blue 2 Inch Single Stage Thermostat Instruction Manual












































