Home > azbil > azbil TY6000Z2000 Neostat Room Thermostat Instruction Manual

azbil TY6000Z2000 Neostat Room Thermostat Instruction Manual

AB-7258  
Installation steps: Neostat directly on a wall (for new installation)  
1) Mount the outlet box cover (conforming to JIS C8340:1999 Boxes and box covers for rigid metal conduits (mounting  
dimension: 66.7 mm)) so that the two mounting holes are vertically aligned.  
2) Remove the cover from Neostat. (See the Cover removal section.)  
3) Unscrew the Neostat main unit screw. Then, hold and lift the guide to remove the main unit from the base.  
Do not hold the setting dial to remove the main unit.  
4) Attach the Neostat base to the outlet box cover so that the arrow (indicated with "UP") points upwards, using two pan-head  
machine screws (M4 x 10) supplied with Neostat. (Tightening torque: 78.5 Nꞏcm)  
5) Wire Neostat. (See the Wiring section.)  
6) Attach the Neostat main unit to the base, using the main unit screw (M3) preassembled with the Neostat main unit.  
(Tightening torque: 39.2 N cm)  
7) Attach the Neostat cover to the main unit. (See the Cover removal section.)  
Base of Neostat  
2 pan-head machine screws (M4 x 10)  
of Neostat  
Main unit of Neostat  
Cover of Neostat  
Outlet box cover (JIS C8340  
with 66.7 mm mounting dimension,  
commercially available)  
Main unit screw (M3)  
preassembled with the main unit  
Figure 4. Installation: Neostat directly on a wall (for new installation)  
8
GeneralDetails
Nameazbil TY6000Z2000 Neostat Room Thermostat Instruction Manual
Makeazbil
LanguageEnglish
FiletypePDF (Download)
File size0.75 MB
Download PDF
1 Star2 Stars3 Stars4 Stars5 Stars (1 votes, average: 5.00 out of 5)
Loading...

azbil TY6000Z2000 Neostat Room Thermostat Instruction Manual