momit Bevel Smart Thermostat Installation Guide

1

2

3

4

5

6

7

8

Installation guide  

VIEW FULL SCREEN PDF MANUAL

General	Details
Name	momit Bevel Smart Thermostat Installation Guide
Make	momit
Language	English
Filetype	PDF (Download)
File size	0.18 MB

Download PDF

(1 votes, average: 5.00 out of 5)

Loading...

• ALL THERMOSTAT INSTRUCTIONS & USER MANUALS
• momit

momit Bevel Smart Thermostat Installation Guide Overview

Summary of Contents

• Page 1: Page 1
• Page 2: What is? How to use it? momit Bevel Devices Installation Technical specification
• Page 3: What is momit Bevel? Is the new smart thermostat with which heating can be controlled from any mobile device with Bevel App. It shows the status of the heating system and allows control of it. Due to its integrated design, there’s no need for any additional device to prioritize the temperature of any chosen room. Only taking off the thermostat from the magnetized base and moving it from room to room. Thanks to its 360º screen, it turns around automatically to show all the information. Momit Gateway allows the thermostat to connect to the Internet. Momit Bevel can be used in two different ways: placed on the wall to replace an old thermostat or separated from the magnetic base to carry from room to room.
• Page 4: Before you start you must have an internet connection to perform properly the installation of the devices. Download the Bevel App from Google Play or App Store. Install the Gateway by connecting it to the current through the micro USB cable and power adapter, as well as the router via ethernet cable. When the 3 LEDs stop blinking, the Gateway installation will have been completed successfully. Register your Gateway in the Bevel App by capturing the QR code found on the back of the device or manually entering the serial number found on the device. Separate both parts, thermostat and base. Remove the base lid pressing on its two slots with a screwdriver, then remove the battery plastic strip. Register the base on the Bevel App and scan the QR code found on the device or by manually entering the serial number.
• Page 5: If you have a thermostat currently installed, remove it to install the base in its place. Place the base on the wall and insert the 2 boiler cables through the lower opening of the base. Fix the base to the wall with screws included in the package. Connect the 2 wires in the 2 inputs. You can place whichever wire in any of the 2 inputs and then put the base lid back on. Remove the thermostat lid and remove the battery plastic strip. Register the thermostat on the Bevel App. Now you can place the thermostat over the base or take the thermostat anywhere you prefer.
• Page 6: Thermostat Base Technical specifications Temperature and humidity sensor Relay: 2A to 30 VDC, 0.5A to 125 VAC Dimensions: 144.55x80x29.63mm Weight: 70g Temperature precision 0.3ºC E-Ink screen Not suitable for outside usage
• Page 7: Screen functions include reducing and increasing temperature, turning the device on and off, and displaying indoor temperature and weather forecast. The device shows battery level and boiler status. The thermostat’s LED WiFi indicators explain connection statuses: connected to momit server, connected to the internet but not to momit server, connected to the gateway but not to the internet, and no internal connection or communication with the base.
• Page 8: Page 8