SUNRICHER SR-ZG9092A Zigbee Heating Thermostat Installation Guide
FloorSenserCalibration
MeasurementType
INT8S,
bitmap32 ,
read-only
0x1005
0x1006
0x1224
0x1224
The temp compensation for the external (floor) sensor, range
is -30-30, unit is 0.1°C. default value 0
Indicates the physical entities that this devices is able to measure. Supports
only bit0: Active measurement (AC)
0x0000
0x0505
0x0508
reportable
DryTime
int16U ,
INT8U
RMSVoltage
The duration of Dry Mode, range is 5-100, unit is min.
Default value is 5.
read-only,
reportable
reportable
Single phase valid voltage, unit is V
ModeAfterDry
int16U ,
The mode after Dry Mode:
Value=0 : OFF
RMSCurrent
reportable,
read-only
Single phase valid current, unit is A
ENUM8
0x1007
0x1224
Value=1 : Manual mode
Value=2 : Auto mode –schedule (default)
Value=3 : Away mode
reportable
int16S ,
ActivePower
reportable
read-only
0x050B
0x0600
Single phase valid power, unit is W
TemperatureDisplay :
Value=0 : Room Temp (Default)
Value=1 : Floor Temp
ENUM8
0x1008
0x1009
0x1224
0x1224
reportable
int16U,
ACVoltageMultiplier
read-only
WindowOpenCheck
The threshold to detect open window, range is 0.3-8, unit is
INT8U
ACVoltageDivisor
0.5ºC,
reportable
int16U,
Used together with above attributes, the real displayed voltage =
RMSVoltage* ACVoltageMultiplier
/ ACVoltageDivisor
0x0601
0x0602
0x0603
0 means disabled, default is 0
read-only
Hysterersis
INT8U
Hysterersis setting, range is 5-20, unit is 0.1ºC, default value
is 5
0x100A
0x2001
0x1224
0x1224
int16U,
reportable
ACCurrentMultiplier
read-only
AlarmAirTempOverValue
INT8U,
ACCurrentDivisor
Room temp alarm threshold, range is 0.20-60, unit is 1ºC,
0 means disabled, default is 45
reportable
int16U,
Used together with above attributes, the real displayed current = RMSCurrent
read-only
* ACCurrentMultiplier
/ ACCurrentDivisor
Away Mode Set:
ENUM8
0x2002
0x1224
Value=0: not away (default)
Value=1: away
reportable
ACAlarmsMask
Specifies which configurable alarms may be generated, only
Bit1: Current Overload is set, if set=0, then ACCurrentOverload=0, over
current will not be detected
Command supported:
0x0800
0x0802
int16U,
Command
Description
Setpoint Raise/Lower
int16S ,
ACCurrentOverload
0x0000
Increase or decrease the set temperature according to current mode, unit is
0.1ºC
reportable
read-only
Alarms when the current is over a certain value, 0, 10-16, unit is A
5.2.5 Simple Meter-0x0702 (Server)
Attributes supported:
Proprietary Attributes:
Type
Description
Attribute
Type
Manufacturer code
Description
Attribute
unsigned48 ,
OverCurrent
CurrentSummationDelivered
read-only,
reportable
0x0000
Int8u,
Over current value set by the user, range is 0, 10-16,
0x1224
Indicates the current amount of electrical energy delivered to the load.
0x0000
reportable
ACCurrentOverload will change spontaneously if this
value is modified.
bitmap8 ,
read-only
Status
0x0200
0x0300
0x0303
0x0306
Flags indicating current device status, always is 0x00
5.2.7 Alarm-0x0009(Server)
enum8 ,
UnitOfMeasure
Please set a valid value for ACAlarmsMask of Electrical Measurement.
The Alarm Server cluster can generate the following commands
read-only
The unit of metering data, this is always kWh(0x00)
map8 ,
SummationFormatting
CmdID
Description
read-only
The decimal point on the left and right sides of the data, this is always 0x00
Alarm:
0x00
bitmap8,
read-only
MeteringDeviceType
Metering data type, this is always Electric Metering (0x00)
The alarm code of Electrical Measurement is 0,
5.2.6 Electrical Measurement-0x0b04(Server)
Proprietary command, Manufacturer code=0x1224
Attributes supported:
CmdID
Description
Room air temperature over heat, not alarm code
Type
Description
Attribute
0x00
| General | Details |
|---|---|
| Name | SUNRICHER SR-ZG9092A Zigbee Heating Thermostat Installation Guide |
| Make | SUNRICHER |
| Language | English |
| Filetype | PDF (Download) |
| File size | 0.88 MB |
(1 votes, average: 5.00 out of 5)
Loading...
hansgrohe AXOR CARLTON Thermostat Mixer Instruction Manual
GENERAL LIFE MITRA 220 Smart Room Thermostat User Manual
Network Thermostat X5-WIFI Smart Touchscreen Thermostat Instruction Manual
Honeywell Home S200 Series FocusPRO Smart Thermostat User Guide
Honeywell YT43MRFBT32 Room Thermostat Instructions
Danfoss TP5001 Programmable Room Thermostat User Guide
Honeywell Home TH2110DH 1 Cool Programmable Digital Thermostat Installation Guide
HERSCHEL MD2 Wi-fi Enabled Wired Thermostat Instruction Manual
75F HyperStat All In one Commercial Thermostat User Manual
Honeywell RCHT8610WF T5 Plus Smart Thermostat Installation Guide