Home > SUNRICHER > SUNRICHER SR-ZG9092A Zigbee Heating Thermostat Installation Guide

SUNRICHER SR-ZG9092A Zigbee Heating Thermostat Installation Guide

int16S ,  
reportable OutdoorTemperature  
SceneValid  
0x0001  
0x0002  
bool,  
read-only  
This is floor temperature, the maximum resolution this format allows is 0.01 ºC.  
0x0003  
0x0004  
If true, the scene identified by CurrentGroup and CurrentScene is currently  
active, i.e. all device attribute values match the values in the scene field set.  
read-only  
Occupancy  
bitmap8 ,  
read-only  
When this flag is set as 1, it means occupied, OccupiedHeatingSetpoint will be  
used, otherwise UnoccupiedHeatingSetpoint will be used.  
bitmap8 ,  
read-only  
NameSupport  
LocalTemperatureCalibration  
Command supported:  
Int8S ,  
Room temperature calibration, range is -30-30, the maximum resolution this  
format allows 0.1°C. Default value: 0  
0x0010  
0x0011  
reportable  
Command  
Description  
Add Scene  
int16S ,  
OccupiedCoolingSetpoint  
0x00  
0x01  
0x02  
0x03  
Adds a scene with or without a scene field set  
reportable  
This system is not invalid.  
View Scene  
OccupiedHeatingSetpoint  
int16S ,  
Returns the scene field set, name and transition times for a scene.  
Range is 0-4000,the maximum resolution this format allows is 0.01 ºC. Default  
is 0xbb8(30.00ºC)  
0x0012  
0x0014  
reportable  
Remove Scene  
Removes a scene from the scene table.  
UnoccupiedHeatingSetpoint  
int16S ,  
Range is 0-4000,the maximum resolution this format allows is 0.01 ºC.  
Default is 0x258(6.00ºC)  
Remove All Scenes  
reportable  
Removes all scenes that belong to a particular group.  
Store Scene  
Enum8,  
ControlSequenceOfOperation  
0x001B  
0x0029  
0x04  
0x05  
Stores the device’s current state as a scene or updates a previously stored  
scene accordingly  
reportable  
Set device supported operation type, here only supports Heating Only(0x02)  
Map16,  
HVAC relay state/ ThermostatRunningState  
read-only,  
reportable  
Recall Scene  
Indicates the relay on/off status, here only supports bit0( Heat State)  
Reverts the device’s current state using the values from the previously  
stored field set.  
Proprietary Attributes:  
5.2.3 Groups-0x0004 (Server)  
Manufacturer  
Description  
code  
Type  
Attribute  
Attributes supported:  
Type  
Description  
Attribute  
OperateDisplayLcdBrightnesss  
OLED brightness when operate the buttons:  
bitmap8,  
read-only  
NameSupport  
ENUM8,  
0x0000  
Value=0 : Low Level  
0x1000  
0x1224  
0x1224  
0, not supported  
reportable  
Value=1 : Mid Level(default)  
Value=2 : High Level  
Command supported:  
ButtonVibrationLevel  
Key beep volume & vibration level:  
Value=0 : off(default)  
Command  
Description  
ENUM8  
Add Group  
0x1001  
0x00  
0x01  
reportable  
Adds the endpoint to a group.  
Value=1 : Low Level  
Value=2 : High Level  
View Group  
Determines whether the device belongs to a group and returns the group  
name, if supported  
FloorSenserType  
Select external (Floor) sensor type:  
Value=5 : NTC 12K/25  
Remove Group  
ENUM8  
Removes this endpoint from the specified group. Also removes all scenes  
that refer to this group.  
Value=4 : NTC 100K/25  
Value=3 : NTC 50K/25  
0x03  
0x1002  
0x1224  
reportable  
Value=2 : NTC 15K/25  
Remove All Groups  
Value=1 : NTC 10K/25 (Default)  
Removes this endpoint from all groups. Also removes all scenes that refer to  
any of the existing groups.  
0x04  
0x05  
ControlType  
The referring sensor for heat control:  
Value=0 : Room sensor(Default)  
Value=1 : floor sensor  
Add Group if Identifying  
ENUM8  
0x1003  
0x1004  
0x1224  
0x1224  
Adds this endpoint to the group, if the endpoint is identifying.  
reportable  
Value=2 : Room+floor sensor  
5.2.4 Thermostat-0x0201(Server)  
Attributes supported:  
PowerUpStatus  
ENUM8  
The mode after reset power of the device:  
Value=0 : default mode  
Type  
Description  
Attribute  
reportable  
int16S ,  
reportable LocalTemperature Attribute  
0x0000  
Value=1 : last status before power off (Default)  
read-only  
This is room temperature, the maximum resolution this format allows is 0.01 ºC.  
GeneralDetails
NameSUNRICHER SR-ZG9092A Zigbee Heating Thermostat Installation Guide
MakeSUNRICHER
LanguageEnglish
FiletypePDF (Download)
File size0.88 MB
Download PDF
1 Star2 Stars3 Stars4 Stars5 Stars (1 votes, average: 5.00 out of 5)
Loading...

SUNRICHER SR-ZG9092A Zigbee Heating Thermostat Installation Guide