STELPRO STE241 Low Voltage Electronic Thermostat User Guide
2. From the Night mode, simultaneously press down the two buttons for more
than 3 seconds. If needed, adjust the timer by pressing down the top button to
increase the value, or the bottom button to decrease it. The Night mode timer
adjustment range is from 1 hour to 23 hours in the Single programming mode.
To quickly scroll through the timer values, press and hold the bottom button.
NOTE: If you set the timer to any value exceeding 23 hours, it will be impossible to
activate the Single programming mode and if it was activated, the Single
programming mode will be deactivated.
3. Activate the Single programming mode by simultaneously pressing down
the two buttons for at least 3 seconds. The
icon will appear. If the Single
programming mode was already activated, the same procedure should be used
to deactivate it.
4. When the adjustment is completed, release the buttons and wait for 5 seconds
to exit the adjustment function.
NOTE: It is always possible to manually change the Day/Night mode during
a 24-hour cycle. However, any manual return to the Night mode will
re-initialize the Night mode timer to the latest value recorded, which
modifies the cycle in progress. In all cases, at the end of the 24-hour
cycle, the thermostat will return to the Night mode and start a new
cycle. It is thus not necessary to readjust the Single programming
mode when
a
manual change is made to the Day/Night mode.
When turning back on after being powered off (because of a power
failure, for example), the Single programming mode is deactivated, and, if
previously activated, the
icon will blink. The blinking will stop as soon
as you press down a button.
Display in either degrees Celsius/Fahrenheit
The thermostat can display the ambient temperature and the set point in degrees
Celsius (standard factory setting) or Fahrenheit.
1. From the day mode, simultaneously press down the two buttons for 8 seconds
until the Celsius/Fahrenheit symbol blinks. Release the buttons.
2. Press down the top button to switch from the degrees Celsius to the degrees
Fahrenheit, and conversely. The degree Celsius or Fahrenheit symbol will be
displayed.
10
INSSTE2410622
| General | Details |
|---|---|
| Name | STELPRO STE241 Low Voltage Electronic Thermostat User Guide |
| Make | StelPro |
| Language | English |
| Filetype | PDF (Download) |
| File size | 0.27 MB |
(1 votes, average: 5.00 out of 5)
Loading...
STELPRO STF362NP Floor Heating Thermostat Owner’s Manual
STELPRO ST302P Programmable Electronic Thermostat Owner’s Manual
STELPRO SAT402ZB Smart Thermostat User Guide
STELPRO ST252NPFF Non-Programmable Electronic Thermostat Owner’s Manual
STELPRO ST402PFF Programmable Electronic Thermostat Owner’s Manual
STELPRO ASMC402 Maestro Zigbee Smart Programmable Thermostat User Guide
STELPRO SIBTE12C Electronic Thermostat Owner’s Manual
STELPRO STZW402+ Electronic Thermostat for The Smart Home Owner’s Manual
STELPRO STCP Floor Heating Thermostat Multiple Programming User Guide
stelpro STZW402 ELECTRONIC THERMOSTAT SMART HOME User Guide
homematic IP HmIP-BWTH-A Wall Thermostat Installation Guide
COPELAND ST55 Sensi Smart Thermostat Instruction Manual
EPH CDTP2 Room Thermostat Installation Guide
WhisperKOOL Phantom 24V Thermostat Conversion Kit Installation Guide
DELTA DORE TYBOX 1117 Programmable Thermostat User Guide
HIVE Thermostat Mini User Guide
KING ELECTRIC HW120 – Hydronic Electronic Line Voltage Non-Programmable Thermostat User Manual
Amana MMW-2 Horizontal Digital Wireless non EMS Wall Thermostat Instruction Manual
REPTITRIP HMT16N Reptile Heating Mat With Digital Thermostat User Manual
Wengart TP808-3 7 Day Programmable Thermostat User Manual