Satel ART-210 Wireless Radiator Thermostat Instruction Manual
SATEL
ART-210
13
5.7 Disabling the knob (child lock)
You can block the knob when the LED display is turned off or it shows temperature
from the sensor ( symbol).
Press the knob and hold for 3 seconds. The
message will be shown on the display.
5.8 Unblocking the knob
Press the knob and hold for 3 seconds. The temperature from the sensor will be shown on
the display.
5.9 Rotating the temperature / messages on the display
1. Remove the thermostat cover (Fig. 4).
2. Remove the batteries.
3. Install the batteries again. The
message will be displayed.
4. Press and hold the knob for 5 seconds. The message on the display will be rotated by
180° (Fig. 23).
5. Replace the thermostat cover (Fig. 5).
6 Restoring the default settings
1. Remove the thermostat cover (Fig. 4).
2. Remove the batteries.
3. Press and hold the knob.
4. While holding the knob, install the batteries. The LED display test will be started
(the LEDs on the display will be turned on and off).
5. Release the knob and wait until the test is complete (the display will turn off).
6. Press the knob.
7. Remove the batteries and install the batteries again. The
the display.
message will be shown on
8. Replace the thermostat cover (Fig. 5).
7 Specifications
Operating frequency band ...............................868.0 MHz ÷ 868.6 MHz / 915 MHz – 928 MHz
| General | Details |
|---|---|
| Name | Satel ART-210 Wireless Radiator Thermostat Instruction Manual |
| Make | Satel |
| Language | English |
| Filetype | PDF (Download) |
| File size | 0.47 MB |

Satel ART-200 Wireless Radiator Thermostat Installation Guide





























